ISO 10626:1991
(Main)Equipment for crop protection — Sprayers — Connecting dimensions for nozzles with bayonet fixing
Equipment for crop protection — Sprayers — Connecting dimensions for nozzles with bayonet fixing
Specifies the dimensions necessary to allow interchangeability. Figure 1 illustrates the dimensions of concern. For the dimensions of the nozzle body see ISO 8169.
Matériel de traitement agropharmaceutique — Pulvérisateurs — Dimensions de raccordement pour buses avec fixation par baïonnette
La présente Norme internationale prescrit les dimensions de raccordement pour buses avec fixation par baïonnette de manière à permettre leur interchangeabilité. Elle est applicable aux buses à jet plat avec fixation par baïonnette pour pulvérisateurs agricoles.
Oprema za zaščito rastlin - Škropilnice - Priključne mere za šobe z bajonetnim nastavkom
General Information
- Status
- Published
- Publication Date
- 06-Nov-1991
- Technical Committee
- ISO/TC 23/SC 6 - Equipment for crop protection
- Drafting Committee
- ISO/TC 23/SC 6 - Equipment for crop protection
- Current Stage
- 9093 - International Standard confirmed
- Start Date
- 17-Aug-2022
- Completion Date
- 12-Feb-2026
Relations
- Effective Date
- 09-Feb-2026
- Effective Date
- 09-Feb-2026
Overview
ISO 10626:1991, "Equipment for crop protection - Sprayers - Connecting dimensions for nozzles with bayonet fixing," defines the connecting dimensions required to ensure interchangeability of flat spraying nozzles that use a bayonet fixing on agricultural sprayers. Published by ISO Technical Committee ISO/TC 23 (Sub‑Committee SC 6), the standard sets the geometric interface (dimensions in millimetres, illustrated in Figure 1) that nozzle and sprayer manufacturers should follow. For the complete nozzle‑body geometry, ISO 8169 is referenced.
Key topics and requirements
- Scope: Applies specifically to flat spraying nozzles with bayonet fixing for agricultural sprayers and aims to permit mechanical interchangeability.
- Connecting dimensions: Specifies the interface dimensions (in millimetres) that mating parts-nozzle and sprayer-must conform to. The standard includes an illustrative figure showing the dimensions of concern.
- Normative reference: ISO 8169 is cited for the detailed dimensions of the nozzle body; users must consult that document for full nozzle geometry.
- Interchangeability focus: The core requirement is compatibility between different manufacturers’ nozzles and sprayer fittings when the bayonet fixing form is used.
- Publication context: First edition, 1991; prepared by ISO TC 23/SC 6.
Applications and who uses it
ISO 10626:1991 is practical for stakeholders involved in the design, manufacture, procurement, maintenance, and regulation of crop‑protection equipment:
- Sprayer manufacturers ensure their fittings are compatible with standard bayonet‑type nozzles.
- Nozzle producers and aftermarket suppliers design nozzle outlets and retaining features to the standard dimensions to guarantee cross‑brand fit.
- Farm equipment designers and OEMs use the standard to specify interface details in product drawings and BOMs.
- Maintenance technicians and farm managers benefit from standardized nozzles for easy replacement, reduced downtime, and simplified spare‑parts stocking.
- Regulators and procurement teams reference the standard when specifying technical requirements for tenders and certification.
Related standards
- ISO 8169 - Equipment for crop protection: Sprayers - Connecting dimensions for nozzles and manometers (referenced for nozzle‑body dimensions).
Note: Always verify whether a more recent edition or successor standard has been published before specifying ISO 10626:1991 in new designs or procurement documents.
Keywords: ISO 10626:1991, bayonet fixing, connecting dimensions, flat spraying nozzles, agricultural sprayers, interchangeability, ISO 8169.
ISO 10626:1991 - Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles with bayonet fixing
ISO 10626:1991 - Matériel de traitement agropharmaceutique -- Pulvérisateurs -- Dimensions de raccordement pour buses avec fixation par baionnette
ISO 10626:1991 - Matériel de traitement agropharmaceutique -- Pulvérisateurs -- Dimensions de raccordement pour buses avec fixation par baionnette
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
ECOCERT
Organic and sustainability certification.
Rainforest Alliance Certification
Sustainable agriculture and forestry certification.
Sponsored listings
Frequently Asked Questions
ISO 10626:1991 is a standard published by the International Organization for Standardization (ISO). Its full title is "Equipment for crop protection — Sprayers — Connecting dimensions for nozzles with bayonet fixing". This standard covers: Specifies the dimensions necessary to allow interchangeability. Figure 1 illustrates the dimensions of concern. For the dimensions of the nozzle body see ISO 8169.
Specifies the dimensions necessary to allow interchangeability. Figure 1 illustrates the dimensions of concern. For the dimensions of the nozzle body see ISO 8169.
ISO 10626:1991 is classified under the following ICS (International Classification for Standards) categories: 65.060.40 - Plant care equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
ISO 10626:1991 has the following relationships with other standards: It is inter standard links to EN ISO 19932-1:2013, EN ISO 19932-1:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
ISO 10626:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-1999
2SUHPD]D]DãþLWRUDVWOLQâNURSLOQLFH3ULNOMXþQHPHUH]DãREH]EDMRQHWQLP
QDVWDYNRP
Equipment for crop protection -- Sprayers -- Connecting dimensions for nozzles with
bayonet fixing
Matériel de traitement agropharmaceutique -- Pulvérisateurs -- Dimensions de
raccordement pour buses avec fixation par baïonnette
Ta slovenski standard je istoveten z: ISO 10626:1991
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
IS0
INTERNATIONAL
STANDARD
First edition
1991-l 1-15
_______ -------. -_ _____-____ __I--._---~-~
Equipment for crop protection - Sprayers -
Connecting dimensions for nozzles with bayonet
fixing
Mat&-iel de traitement agropharmaceutique - Pulv&isateurs -
Dimensions de raccordement pow- buses avec fixation par bai’onneffe
------ .---_I_--- -__- -
----------II------ _ ____ __ I___ ____________- ~__-___ -
Reference number
IS0 10626:1991(E)
IS0 10626:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for vot
...
IS0
INTERNATIONAL
STANDARD
First edition
1991-l 1-15
_______ -------. -_ _____-____ __I--._---~-~
Equipment for crop protection - Sprayers -
Connecting dimensions for nozzles with bayonet
fixing
Mat&-iel de traitement agropharmaceutique - Pulv&isateurs -
Dimensions de raccordement pow- buses avec fixation par bai’onneffe
------ .---_I_--- -__- -
----------II------ _ ____ __ I___ ____________- ~__-___ -
Reference number
IS0 10626:1991(E)
IS0 10626:1991(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 o/‘o of the member
bodies casting a vote.
International Standard IS0 10626 was prepared by Technical Committee
ISO/TC 23, Tractors and machinery for agricrllture and forestry, Sub-
Committee SC 6, Equipment for crop protection.
0 IS0 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing
...
Iso
NORME
INTERNATIONALE
Premiere édition
1991-l 1-15
Matériel de traitement agropharmaceutique -
Pulvérisateurs - Dimensions de raccordement
pour buses avec fixation par baïonnette
Equipment for trop protection - Sprayers - Connecting dimensions for
nozzies with bayonet fïxing
----. -- -.-.----_--_- ----------.--- -
Numéro de référence
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 10626 a été élaborée par le comité techni-
que ISO/TC 23, Tracteurs et matériels agricoles et forestiers, sous-
comité SC 6, Matériel de traitement pl,ytophannaceutiqLle.
0 ISO 7 997
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 5
...
Iso
NORME
INTERNATIONALE
Premiere édition
1991-l 1-15
Matériel de traitement agropharmaceutique -
Pulvérisateurs - Dimensions de raccordement
pour buses avec fixation par baïonnette
Equipment for trop protection - Sprayers - Connecting dimensions for
nozzies with bayonet fïxing
----. -- -.-.----_--_- ----------.--- -
Numéro de référence
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération
mondiale d’organismes nationaux de normalisation (comités membres
de I’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de I’ISO. Chaque comité membre inté-
ressé par une étude a le droit de faire partie du comité technique créé
à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I’ISO participent également aux tra-
vaux. L’ISO collabore étroitement avec la Commission électrotechnique
internationale (CEI) en ce qui concerne la normalisation électrotech-
nique.
Les projets de Normes internationales adoptés par les comités techni-
ques sont soumis aux comités membres pour vote. Leur publication
comme Normes internationales requiert l’approbation de 75 % au moins
des comités membres votants.
La Norme internationale ISO 10626 a été élaborée par le comité techni-
que ISO/TC 23, Tracteurs et matériels agricoles et forestiers, sous-
comité SC 6, Matériel de traitement pl,ytophannaceutiqLle.
0 ISO 7 997
Droits de reproduction réservés. Aucune partie de cette publication ne peut être repro-
duite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou
mécanique, y compris la photocopie et les microfilms, sans l’accord écrit de l’éditeur.
Organisation internationale de normalisation
Case Postale 5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...