Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing

IEC 62660-2:2018 is available as IEC 62660-2:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 62660-2:2018 specifies test procedures to observe the reliability and abuse behaviour of secondary lithium-ion cells and cell blocks used for propulsion of electric vehicles including battery electric vehicles (BEV) and hybrid electric vehicles (HEV). This document specifies the standard test procedures and conditions for basic characteristics of lithium-ion cells for use in propulsion of battery and hybrid electric vehicles. The tests are indispensable for obtaining essential data on reliability and abuse behaviour of lithium-ion cells for use in various designs of battery systems and battery packs. This document provides standard classification of description of test results to be used for the design of battery systems or battery packs. IEC 62660-2:2018 cancels and replaces the first edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) The procedure of forced discharge test has been clarified (6.4.3.2).
b) "Cell block" has been added to the scope (Clause 1).
c) Option of temperature cycling test with electrical operation has been deleted (6.3.2).
d) The test conditions for overcharge test have been revised (6.4.2.2).

Eléments d'accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques - Partie 2: Essais de fiabilité et de traitement abusif

IEC 62660-2:2018 est disponible sous forme de IEC 62660-2:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 62660-2:2018 spécifie les procédures d'essai destinées à observer la fiabilité et le comportement sous traitement abusif des éléments et des blocs d’éléments d’accumulateurs lithium-ion utilisés pour la propulsion des véhicules électriques, y compris les véhicules électriques à batterie (BEV) et les véhicules électriques hybrides (HEV). Le présent document spécifie les procédures et les conditions d'essai normalisées pour des caractéristiques fondamentales des éléments lithium-ion utilisés pour la propulsion des véhicules électriques à batterie d’accumulateurs et hybrides. Les essais sont indispensables pour obtenir des données importantes sur la fiabilité et sur le comportement sous traitement abusif des éléments lithium-ion utilisés dans différentes conceptions de systèmes de batteries et de packs de batteries. Le présent document donne une classification normalisée de la description des résultats d'essai à utiliser pour la conception des systèmes de batteries et des packs de batteries. L'IEC 62660-2:2018 annule et remplace la première édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) La procédure d'essai de décharge forcée a été clarifiée (6.4.3.2).
b) Le concept de "bloc d’éléments" a été ajouté au domaine d’application (Article 1).
c) L’option d’essai de cycles de température avec fonctionnement électrique a été supprimée (6.3.2).
d) Les conditions d’essai relatives à l’essai de surcharge ont été révisées (6.4.2.2).

General Information

Status
Published
Publication Date
11-Dec-2018
Current Stage
PPUB - Publication issued
Start Date
14-Dec-2018
Completion Date
12-Dec-2018
Ref Project

Relations

Buy Standard

Standard
IEC 62660-2:2018 RLV - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing Released:12/12/2018 Isbn:9782832263501
English language
60 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
IEC 62660-2:2018 - Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
English and French language
37 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62660-2 ®
Edition 2.0 2018-12
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 2: Reliability and abuse testing

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 62660-2 ®
Edition 2.0 2018-12
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –

Part 2: Reliability and abuse testing

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.20; 43.120 ISBN 978-2-8322-6350-1

– 2 – IEC 62660-2:2018 RLV © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Test conditions . 9
4.1 General . 9
4.2 Measuring instruments . 9
4.2.1 Range of measuring devices . 9
4.2.2 Voltage measurement . 9
4.2.3 Current measurement . 9
4.2.4 Temperature measurements . 9
4.2.5 Other measurements . 10
4.3 Tolerance . 10
Test temperature .
4.4 Thermal stabilization . 11
5 Electrical measurement . 11
5.1 General charge conditions . 11
5.2 Capacity . 11
5.3 SOC adjustment . 11
6 Reliability and abuse tests . 12
6.1 General . 12
6.2 Mechanical test . 12
6.2.1 Vibration . 12
6.2.2 Mechanical shock . 13
6.2.3 Crush . 14
6.3 Thermal test . 15
6.3.1 High temperature endurance. 15
6.3.2 Temperature cycling . 16
6.4 Electrical test . 19
6.4.1 External short circuit . 19
6.4.2 Overcharge . 20
6.4.3 Forced discharge . 21
7 Description of test results . 21
Annex A (informative) Selective test conditions . 22
Bibliography . 23

Figure – BEV current profile for temperature cycling .
Figure – SOC level over all test cycles – BEV application .
Figure – HEV current profile for temperature cycling .
Figure 1 – Example of temperature measurement of cell . 10
Figure 2 – PSD of acceleration vs. plotted against frequency . 13
Figure 3 – Examples of crush test . 15

Table – Temperatures and time duration for temperature cycling .

Table – Test steps and BEV current profile .
Table – Test steps and HEV current profile .
Table 1 – Discharge conditions . 11
Table 2 – Values for PSD and frequency . 13
Table 3 – Mechanical shock test – parameters . 14
Table 4 – Temperatures and time duration for temperature cycling . 16
Table 5 – Test result description . 21
Table A.1 – Capacity test conditions . 22

– 4 – IEC 62660-2:2018 RLV © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.

International Standard IEC 62660-2 has been prepared by IEC technical committee 21:
Secondary cells and batteries.
This second edition cancels and replaces the first edition published in 2010. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) The procedure of forced discharge test has been clarified (6.4.3.2).
b) "Cell block" has been added to the scope (Clause 1).
c) Option of temperature cycling test with electrical operation has been deleted (6.3.2).
d) The test conditions for overcharge test have been revised (6.4.2.2).
The text of this International Standard is based on the following documents:
FDIS Report on voting
21/976/FDIS 21/986/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in a
...


IEC 62660-2 ®
Edition 2.0 2018-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 2: Reliability and abuse testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 2: Essais de fiabilité et de traitement abusif
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC -
.iec.ch/glossary
Glossaire IEC - std
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.

IEC 62660-2 ®
Edition 2.0 2018-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Secondary lithium-ion cells for the propulsion of electric road vehicles –
Part 2: Reliability and abuse testing
Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers
électriques –
Partie 2: Essais de fiabilité et de traitement abusif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220.20; 43.120 ISBN 978-2-8322-6289-4
– 2 – IEC 62660-2:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test conditions . 8
4.1 General . 8
4.2 Measuring instruments . 8
4.2.1 Range of measuring devices . 8
4.2.2 Voltage measurement . 8
4.2.3 Current measurement . 8
4.2.4 Temperature measurements . 8
4.2.5 Other measurements . 9
4.3 Tolerance . 9
4.4 Thermal stabilization . 9
5 Electrical measurement . 9
5.1 General charge conditions . 9
5.2 Capacity . 10
5.3 SOC adjustment . 10
6 Reliability and abuse tests . 10
6.1 General . 10
6.2 Mechanical test . 11
6.2.1 Vibration . 11
6.2.2 Mechanical shock . 12
6.2.3 Crush . 13
6.3 Thermal test . 14
6.3.1 High temperature endurance. 14
6.3.2 Temperature cycling . 14
6.4 Electrical test . 15
6.4.1 External short circuit . 15
6.4.2 Overcharge . 16
6.4.3 Forced discharge . 16
7 Description of test results . 16
Annex A (informative) Selective test conditions . 18
Bibliography . 19

Figure 1 – Example of temperature measurement of cell . 9
Figure 2 – PSD of acceleration plotted against frequency . 11
Figure 3 – Examples of crush test . 13

Table 1 – Discharge conditions . 10
Table 2 – Values for PSD and frequency . 12
Table 3 – Mechanical shock test – parameters . 12
Table 4 – Temperatures and time duration for temperature cycling . 15
Table 5 – Test result description . 17
Table A.1 – Capacity test conditions . 18

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SECONDARY LITHIUM-ION CELLS FOR
THE PROPULSION OF ELECTRIC ROAD VEHICLES –

Part 2: Reliability and abuse testing

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.