Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

Corrigendum 1 - Mesure de la densité de fumées dégagées par des câbles brûlant dans des conditions définies - Partie 2: Procédure d'essai et exigences

General Information

Status: Published
Publication Date: 20-Sep-2006

ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
: 29.020 - Electrical engineering in general
: 29.060.20 - Cables

Technical Committee: TC 20 - Electric cables

Current Stage: PPUB - Publication issued
Start Date: 21-Sep-2006
Completion Date: 30-Sep-2006

Relations

Corrects: IEC 61034-2:2005 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
Effective Date: 05-Sep-2023

IEC 61034-2:2005/COR1:2006 - Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
Released:9/21/2006 - Page 1 preview

Standard

IEC 61034-2:2005/COR1:2006 - Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements Released:9/21/2006

English and French language

10 pages

sale 15% off

Preview

sale 15% off

Preview

Get Certified

Connect with accredited certification bodies for this standard

Intertek Testing Services NA Inc.

Intertek certification services in North America.

ANAB United States Verified

Visit Website

NSF International

Global independent organization facilitating standards development and certification.

ANAB United States Verified

Visit Website

UL Solutions

Global safety science company with testing, inspection and certification.

ANAB United States Verified

Visit Website

Frequently Asked Questions

What is IEC 61034-2:2005/COR1:2006?

IEC 61034-2:2005/COR1:2006 is a standard published by the International Electrotechnical Commission (IEC). Its full title is "Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements". This standard covers: Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

What is the scope of IEC 61034-2:2005/COR1:2006?

Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

What ICS categories does IEC 61034-2:2005/COR1:2006 belong to?

IEC 61034-2:2005/COR1:2006 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 29.020 - Electrical engineering in general; 29.060.20 - Cables. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to IEC 61034-2:2005/COR1:2006?

IEC 61034-2:2005/COR1:2006 has the following relationships with other standards: It is inter standard links to IEC 61034-2:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access IEC 61034-2:2005/COR1:2006?

IEC 61034-2:2005/COR1:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

IEC 61034-2:2005/COR1:2006 - C...

Publication 61034-2 de la CEI IEC Publication 61034-2
(Troisième édition – 2005) (Third edition – 2005)
Mesure de la densité de fumées dégagées par des Measurement of smoke density of cables burning
câbles brûlant dans des conditions définies – under defined conditions –
Partie 2: Procédure d'essai et exigences Part 2: Test procedure and requirements

CORRIGENDUM 1
Pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

IEC

IEC 60332-1-2:2025(Main)

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

IEC 60332‑1‑2:2025 specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions using a 1 kW pre-mixed flame. The apparatus is described in IEC 60332‑1‑1.
NOTE 1 Testing to IEC 60332‑1‑2 can be performed simultaneously with that to IEC 60332‑1‑3, if required.
This group safety publication focusing on test method(s) is primarily intended to be used as a product safety standard for the products mentioned in the scope, but is also intended to be used by technical committees in the preparation of standards for products similar to those mentioned in the scope of this group safety publication, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51.
NOTE 2 The performing of this test method on a single insulated conductor or cable or optical fibre cable does not provide compliance with fire propagation requirements in relevant standards in the case that the single insulated conductor or cable or optical fibre cable is installed with or amongst other cables as a group. (See the IEC 60332‑3 series).
One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of its publications.

Standard
12 pages
English language
sale 15% off

IEC

IEC 60754-1:2011/AMD1:2019(Amendment)

Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

Standard
12 pages
English and French language
sale 15% off

IEC

IEC 60754-2:2011/AMD1:2019(Amendment)

Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity

Standard
13 pages
English and French language
sale 15% off

IEC

IEC 61034-1:2005/AMD2:2019(Amendment)

Amendment 2 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus

Standard
5 pages
English and French language
sale 15% off

IEC

IEC 61034-2:2005/AMD2:2019(Amendment)

Amendment 2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

Standard
5 pages
English and French language
sale 15% off

IEC

IEC 60331-3:2018(Main)

Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

IEC 60331-3:2018 specifies the test method for cables which are required to maintain circuit integrity when tested in a metal enclosure and when subject to fire and mechanical shock under specified conditions. This document is applicable to cables of rated voltage not exceeding 600 V/1 000 V, including those of rated voltage below 80 V, metallic data and telecom cables and optical fibre cables. It is intended for use when testing cables not greater than 20 mm overall diameter. This document includes details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to electric power and control cables with rated voltage up to and including 600 V/1 000 V. Details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallic data and telecom cables and optical fibre cables are not given by IEC 60331-3. Although the scope is restricted to cables with rated voltage up to and including 0,6/1,0 kV, the procedure can be used, with the agreement of the manufacturer and the purchaser, for cables with rated voltage up to and including 1,8/3 (3,3) kV, provided that suitable fuses are used. It is not assumed that cables successfully assessed by this method, will also pass requirements for either IEC 60331-1 or IEC 60331-2. Testing to either of these two standards is to be carried out separately. Such additional performance can be recognised by the marking in accordance with IEC 60331-1:2018 Clause 11 or IEC 60331 2:2018 Clause 11. This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision. The significant technical changes with respect to the previous edition are as follows:
– extension of the scope to include metallic data and telecom cables and optical fibre cables, although details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallic data and telecom cables and optical fibre cables are not given by IEC 60331-3;
– improved description of the test environment;
– mandatory use of mass flow meter/controllers as the means of controlling accurately the input flow rates of fuel and air to the burner;
– improved description of the information to be included in the test report.

Standard
26 pages
English language
sale 15% off
Standard
52 pages
English language
sale 15% off
Standard
52 pages
English and French language
sale 15% off

IEC

IEC 60331-1:2018(Main)

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

IEC 60331-1:2018 specifies the test method for cables which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions.
This document is applicable to cables of rated voltage not exceeding 600 V/1 000 V, including those of rated voltage below 80 V, metallic data and telecom cables and optical fibre cables.
It is intended for use when testing cables of greater than 20 mm overall diameter.
Cables of smaller diameter are intended to be tested using the apparatus, procedure and requirements of IEC 60331-2.
This document includes details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to electric power and control cables with rated voltage up to and including 600 V/1 000 V. Details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallic data and telecom cables and optical fibre cables are not given by IEC 60331-1.
Although the scope is restricted to cables with rated voltage up to and including 0,6/1,0 kV, the procedure can be used, with the agreement of the manufacturer and the purchaser, for cables with rated voltage up to and including 1,8/3 (3,3) kV, provided that suitable fuses are used.
Annex A provides the method of verification of the burner and control system used for the test.
Requirements are stated for an identification that may optionally be marked on the cable to signify compliance with this document.
This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision.
The significant technical changes with respect to the previous edition are as follows:
– extension of the scope to include metallic data and telecom cables and optical fibre cables, although details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallic data and telecom cables and optical fibre cables are not given by IEC 60331-1;
– improved description of the test environment;
– modified steel test ladder with two extra vertical elements to accommodate the modified testing of single core cables without concentric metal layer and the testing of cables with a bending radius in normal use larger than approximately 400 mm;
– mandatory use of mass flow meters/controllers as the means of controlling accurately the input flow rates of fuel and air to the burner;
– improved description of the information to be included in the test report.
This document has the status of a group safety publication in accordance with IEC Guide 104.

Standard
27 pages
English language
sale 15% off
Standard
54 pages
English language
sale 15% off
Standard
55 pages
English and French language
sale 15% off

IEC

IEC 60331-2:2018(Main)

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

IEC 60331-2:2018 specifies the test method for cables which are required to maintain circuit integrity when subject to fire and mechanical shock under specified conditions.
This document is applicable to cables of rated voltage not exceeding 600 V/1 000 V, including those of rated voltage below 80 V, metallic data and telecom cables and optical fibre cables.
It is intended for use when testing cables of not greater than 20 mm overall diameter.
Cables of larger diameter are intended to be tested using the apparatus, procedure and requirements of IEC 60331-1.
This document includes details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to electric power and control cables with rated voltage up to and including 600 V/1000 V. Details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallic data and telecom cables and optical fibre cables are not given by IEC 60331-2.
Although the scope is restricted to cables with rated voltage up to and including 0,6/1,0 kV, the procedure can be used, with the agreement of the manufacturer and the purchaser, for cables with rated voltage up to and including 1,8/3 (3,3) kV, provided that suitable fuses are used.
Annex A provides the method of verification of the burner and control system used for the test.
Requirements are stated for an identification that may optionally be marked on the cable to signify compliance with this standard.
This second edition cancels and replaces the first edition published in 2009. It constitutes a technical revision.
The significant technical changes with respect to the previous edition are as follows:
– extension of the scope with metallic data and telecom cables and optical fibre cables, although details for the specific point of failure, continuity checking arrangement, test sample, test procedure and test report relevant to metallicdata and telecom cables and optical fibre cables are not given by IEC 60331-2;
– improved description of the test environment;
– mandatory use of mass flow meters/controllers as the means of controlling accurately the input flow rates of fuel and air to the burner;
– improved figure illustrating method of mounting of the sample regarding bending radius;
– improved description of the information to be included in the test report.