IEC 61375-2-3:2015/COR1:2015
(Corrigendum)Corrigendum 1 - Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile
Corrigendum 1 - Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile
General Information
Relations
Standards Content (Sample)
IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IEC 61375-2-3
Edition 1.0 2015-07
Electronic railway equipment – Train communication network (TCN) –
Part 2-3: TCN communication profile
CO RRI G E NDUM 1
Replace th
...
This May Also Interest You
IEC 63341-2:2025 applies to on-board hydrogen fuel systems (HFSs) used to supply the fuel cells for the traction power and the auxiliaries supply of railway vehicles (such as hybrid vehicles as defined in IEC 62864-1).
This document applies to hydrogen storage in gaseous form. Other means of storage (such as liquid, liquid cryo-compressed, metal hydrides) are not covered in this document.
This document applies to any rolling stock type (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives).
This document addresses the on-board mechanical, fluidic and electrical interfaces between the on-board hydrogen fuel system and fuelling station. The fuelling station, fuelling protocol and communication for the fuelling protocol are not in the scope of this document.
This document defines:
– the scope of supply of hydrogen fuel system and the description of the interfaces with sub systems internal and external to the rolling stock such as fuel cell power system, fuelling station systems;
– the environmental constraints;
– the design requirements to support HFS compliance with railway applications;
– the safety and reliability requirements to design and install the HFS for railway applications;
– the marking and labelling requirements;
– the requirements related to storage, transportation, installation and maintenance;
– the validation (type, routine and investigation tests) requirements.
- Standard71 pagesEnglish languagesale 15% off
- Standard79 pagesFrench languagesale 15% off
- Standard150 pagesEnglish and French languagesale 15% off
IEC 63341-1:2025 applies to fuel cell power systems installed onboard rolling stock for railway applications (e.g. light rail vehicles, tramways, streetcars, metros, commuter trains, regional trains, high speed trains, locomotives). Fuel cell power systems specified in this document are used for the traction power and the auxiliary supply of railway vehicles such as hybrid vehicles, and in case of use as an auxiliary onboard power source. This document applies to the fuel cell technology called proton exchange membrane fuel cell (PEMFC), with the use of hydrogen as fuel source and the use of air as oxidant source. This document does not apply for hydrogen fuel system which is specified in IEC 63341-2, as HFS is not within the scope of this document. This document does not apply for power conversion equipment which is specified in IEC 61287-1 and is not within the scope this document.
This document specifies:
- the scope of supply and the description of the interfaces (fluidic, electrical, thermal and mechanical) of the fuel cell power system;
- the description of the environmental conditions;
- the specification and description of all the requirements to ensure the fuel cell power system conformance with a railway application;
- the process to validate the fuel cell power system sizing required for a specific load profile;
- the safety, reliability and protection requirements to design the fuel cell power system for a railway application;
- the marking and labelling requirements;
- the requirements related to storage, transportation, installation and maintenance;
- the tests (type, routine and investigation) required to validate the fuel cell power system.
- Standard63 pagesEnglish languagesale 15% off
- Standard68 pagesFrench languagesale 15% off
- Standard131 pagesEnglish and French languagesale 15% off
IEC 62278-2:2025 considers the safety-related generic aspects of the RAMS life cycle and defines methods and tools which are independent of the actual technology of the systems and subsystems.
This document provides:
a) methods for the understanding of the systems approach to safety which is a key concept of IEC 62278;
b) methods to derive the safety requirements and their safety integrity requirements for the system and to apportion them to the subsystems;
c) methods to derive the safety integrity levels (SIL) for the safety-related electronic functions;
d) guidance and methods for the following areas:
1) safety process;
2) safety demonstration and acceptance;
3) organization and independence of roles;
4) risk assessment;
5) specification of safety requirements;
6) apportionment of functional safety requirements;
7) design and implementation;
e) the user of this document with the methods to assure safety with respect to the system under consideration and its interactions;
f) guidance about the definition of the system under consideration, including identification of the interfaces and the interactions of this system with its subsystems or other systems, in order to conduct the risk analysis.
This document does not specify:
g) RAMS targets, quantities, requirements or solutions for specific railway applications;
h) rules or processes pertaining to the certification of railway products against the requirements of this document;
i) an approval process by the safety authority.
This document is applicable:
j) to the specification and demonstration of RAMS for all railway applications and at all levels of such an application, as appropriate, from complete railway systems to major systems and to individual and combined subsystems and components within these major systems, including those containing software; in particular:
1) to new systems;
2) to new systems integrated into existing systems already accepted, but only to the extent and insofar as the new system with the new functionality is being integrated. It is otherwise not applicable to any unmodified aspects of the existing system;
3) as far as reasonably practicable, to modifications and extensions of existing systems already accepted, but only to the extent and insofar as existing systems are being modified. It is otherwise not applicable to any unmodified aspect of the existing system;
k) at all relevant phases of the life cycle of an application;
l) for use by railway duty holders and the railway suppliers.
This document is not applicable to:
m) any unmodified aspect of the existing system;
n) existing systems which remain unmodified, including those systems already compliant with IEC 62278:2002.
IEC 62278-2:2025, together with IEC 62278-1, cancels and replaces IEC 62278:2002. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) creation of this new Part 2 providing, for the first time, safety-related guidance and methods that support the safety management process provided in IEC 62278-1:2025.
The IEC 62278 series forms part of the railway sector specific application of IEC 61508. IEC 62278, IEC 62279 and IEC 62425 comprise the railway sector equivalent of the IEC 61508 series so far as railway communication, signalling and processing systems are concerned. When compliance with these documents has been demonstrated, further evaluation of compliance with the IEC 61508 series is not foreseen. A list of all parts in the IEC 62278 series, published under the general title Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS), can be found on the IEC website.
- Standard78 pagesEnglish languagesale 15% off
- Standard81 pagesFrench languagesale 15% off
- Standard159 pagesEnglish and French languagesale 15% off
IEC 62278-1:2025 addresses railway specifics, enables conflicts between RAMS elements to be controlled and managed effectively.
This document specifies:
a) a process, based on the system life cycle and tasks within it, for managing RAMS;
b) a systematic process, tailorable to the type and size of the system under consideration, for specifying requirements for RAMS and demonstrating that these requirements are achieved.
This document does not specify:
c) RAMS targets, quantities, requirements or solutions for specific railway applications;
d) rules or processes pertaining to the certification of railway products against the requirements of this document;
e) an approval process for the railway stakeholders.
This document is applicable to railway application fields, including signalling, rolling stock and fixed installations, and specifically:
f) to the specification and demonstration of RAMS for all railway applications and at all levels of such an application, as appropriate, from complete railway systems to major systems and to individual and combined subsystems and components within these major systems, including those containing software; in particular:
- to new systems;
- to new systems integrated into existing systems already accepted, but only to the extent and insofar as the new system with the new functionality is being integrated. It is otherwise not applicable to any unmodified aspects of the existing system;
- as far as reasonably practicable, to modifications and extensions of existing systems already accepted, but only to the extent and insofar as existing systems are being modified. It is otherwise not applicable to any unmodified aspect of the existing system;
g) at all relevant phases of the life cycle of an application;
h) for use by railway duty holders and the railway suppliers.
This document is not applicable to:
i) any unmodified aspects of the existing system;
j) existing systems which remain unmodified, including those systems already compliant with IEC 62278:2002.
This first edition, together with IEC 62278-2, cancels and replaces IEC 62278:2002. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) added 5.2 on multi level system approach;
b) added 5.3 on railway system overview;
c) added 5.9 on risk reduction strategy;
d) updated the content of correlation of RAMS management process and system life cycle in 6.2;
e) added 6.4 on organizational requirements;
f) added 6.5 on application of this document and adaptability to project scope and size;
g) added 6.8 on independent safety assessment;
h) added Clause 8 on safety case;
i) added Annex D providing guidance on system definition;
The IEC 62278 series forms part of the railway sector specific application of IEC 61508. IEC 62278, IEC 62279 and IEC 62425 comprise the railway sector equivalent of the IEC 61508 series so far as railway communication, signalling and processing systems are concerned. When compliance with these documents has been demonstrated, further evaluation of compliance with the IEC 61508 series is not foreseen. A list of all parts in the IEC 62278 series, published under the general title Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS), can be found on the IEC website.
- Standard97 pagesEnglish languagesale 15% off
- Standard102 pagesFrench languagesale 15% off
- Standard199 pagesEnglish and French languagesale 15% off
IEC 63536:2025 specifies minimum functional requirements for urban rail signalling and control systems (for use in urban guided passenger transport lines and networks)
- which operate on line-of-sight or using automatic interlock signalling with intermittent supervision,
- not covered by the existing UGTMS standard IEC 62290 series, and
- not forming a part of an urban traffic control system but possibly interfaced with such systems.
The document is restricted to minimum functional requirements which allow users to define more specific requirements based on the given framework of the system requirements at top level. This document is not applicable to command and control systems for urban rail using continuous data transmission and continuous supervision of train movements by train protection profile (already covered by the IEC 62290 series).
- Standard29 pagesEnglish languagesale 15% off
- Standard32 pagesFrench languagesale 15% off
- Standard61 pagesEnglish and French languagesale 15% off
IEC 62590-1:2025 specifies the common requirements and definitions for all power converter applications in fixed installations for power supply of railway systems.
This document applies to fixed installations of following electric traction systems:
railway networks,
metropolitan transport networks including metros, tramways, trolleybuses and fully automated transport systems, magnetic levitated transport systems, electric road systems.
This document applies to AC/DC converters, DC converters and AC converters. Converters for improvement of power quality and for energy saving are also included.
Converters connected to electric traction systems feeding 3AC, 1AC or DC systems for auxiliary purpose are not in the scope of this document but some aspects such as insulation coordination and railway specific conditions can be referred to.
This document, in conjunction with the other parts of IEC 62590, cancels and replaces IEC 62589:2010 and the former IEC 62590:2019.
This document includes the following significant technical changes with respect to IEC 62589:2010 and the former IEC 62590:2019:
a) Split into common requirements and special requirements for different converters;
b) Interface Model for the different systems connected;
c) Split into circuits with their requirements like insulation coordination;
d) Energy efficiency addressed.
- Standard106 pagesEnglish and French languagesale 15% off
- Standard1 pageEnglish and French languagesale 15% off
IEC 62425:2025 is applicable to safety-related electronic systems (including subsystems and equipment) for railway signalling applications. This document applies to generic systems (i.e. generic products or systems defining a class of applications), as well as to systems for specific applications. The scope of this document, and its relationship with other IEC and CENELEC standards, are shown in Figure 1. This document is applicable only to the functional safety of systems. It does not deal with other aspects of safety such as the occupational health and safety of personnel. While functional safety of systems clearly can have an impact on the safety of personnel, there are other aspects of system design which can also affect occupational health and safety and which are not covered by this document. Cybersecurity aspects of functional safety are addressed only to a limited extent. This document applies to all the phases of the life cycle of a safety-related electronic system, focusing in particular on phases 5 (architecture and apportionment of system requirements) to 10 (system acceptance) as defined in IEC 62278-1: -
Requirements for systems which are not related to safety are outside the scope of this document. This document is not applicable to existing systems, subsystems or equipment which had already been accepted prior to the development of this document. However, so far as reasonably practicable, it is applicable to modifications and extensions to existing systems, subsystems and equipment. This document is primarily applicable to systems, subsystems or equipment which have been specifically designed and manufactured for railway signalling applications. It is also applicable, so far as reasonably practicable, to general-purpose or industrial equipment (e.g. power supplies, display screens or other commercial off the shelf items), which is procured for use as part of a safety-related electronic system. This document is aimed at railway duty holders, railway suppliers, and assessors as well as at safety authorities, although it does not define an approval process to be applied by the safety authorities. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) a better alignment with the life cycle phases defined in IEC 62278-1 has been made;
b) Clause 5 describes the requirements that apply to the development of safety-related electronic systems (until phase 9 of the life cycle);
c) Clause 8 focuses on the requirements for safety acceptance and approval of safety-related electronic systems and subsequent phases;
d) requirements and guidance have been added in Clause 6 on the following topics:
- reuse of pre-existing systems,
- safety-related tools,
- impact of cybersecurity threats on functional safety,
- specific application safety cases;
e) requirements for the structure and content of the safety case are now defined in a dedicated Clause 7;
f) Annex A has been updated for the specification and allocation of safety integrity requirements;
g) the content of former Annex D has been merged with Annex B, and the content has been changed from informative to normative;
h) the status of Annex E has been changed from informative to normative;
i) an Annex F has been added as an informative annex on User Programmable Integrated Circuits.
A more detailed comparison of changes between IEC 62425:2007 and this document can be found in Annex G.
- Standard287 pagesEnglish languagesale 15% off
IEC 62290-2:2025 specifies the functional requirements of UGTMS (urban guided transport management and command/control systems) for use in urban guided passenger transport lines and networks. This document is applicable for new lines or for upgrading existing signalling and command control systems.
The IEC 62290 series specifies the functional, system and interface requirements for the command, control, and management systems intended to be used on urban, guided passenger transport lines and networks.
These systems are designated herein as urban guided transport management and command/control systems (UGTMS). UGTMS cover a wide range of operations needs from non-automated (GOA1) to unattended (GOA4) operation. A line may be equipped with UGTMS on its full length or only partly equipped.
The IEC 62290 series does not specifically address security issues. However, aspects of safety requirements may apply to ensuring security within the urban guided transit system.
The main objectives of this series are as follows:
* to provide a baseline system description and functional requirements specification for a transport authority to use in a request for proposal,
* to provide recommendations for those transport authorities wishing to acquire an interoperable or interchangeable system.
It is the responsibility of the transport authority concerned to decide on how to apply the IEC 62290 series and to take into account their particular needs.
This document is applicable to applications using
* continuous data transmission,
* continuous supervision of train movements by train protection profile, and
* localisation of trains by onboard UGTMS equipment (reporting trains), and optionally by external wayside (and optionally onboard) device.
In this document, the functional requirements set the framework to which detailed functions are added to define any generic or specific application.
Because of that, although this document is applicable as a basis to define SRS, FIS and FFFIS, elements can be added for a generic or specific application.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) the functions 5.1.4.5 Stopping a train en route, 5.1.5.4 Monitor speed limit at discrete location, 5.5.5 Manage UGTMS transfer tracks, 5.6.4.1 Monitor passenger emergency calls and 6.2.4 Ensure connecting services have been deleted;
b) the functions 5.5.11 Manage train washing, 5.5.12 Manage non-stopping areas and 6.3.4 Perform progressive shutdown have been added;
c) many of the requirements have been reworded: changes in their wording could be only minor and editorial, or it could have technical consequences;
d) some requirements of the second edition have been moved from one function/subfunction to another;
e) some requirements have been deleted;
f) some new requirements have been added in the existing functions;
g) an informative annex giving the reader some user’s recommendations about this document has been added;
h) another informative annex giving some typical performance-related criteria has been also added.
i) an informative annex providing a summary of applicability of functions and subfunctions (mandatory or optional) depending on GOA has been added.
In order to avoid any disturbance in the use of the document, when functions or requirements of IEC 62290‑2:2014 have been deleted, their numberings have been kept on purpose in this document. The expression "Deleted" is indicated at the place of the former headlines of the deleted functions, or at the place of the wording of the deleted requirements. Therefore, the impacts on any existing references or traceability matrices defined previously to this third edition is limited as much as possible.
For readability of the text, just below the headline of functions and subfunctions describing requirem
- Standard198 pagesEnglish and French languagesale 15% off
IEC 62290‑1:2025 provides an introduction to the IEC 62290 series and deals with the main concepts, the system definition, the principles and the basic functions of UGTMS (urban guided transport management and command/control systems) for use in urban guided passenger transport lines and networks. This document is applicable for new lines or resignalling of existing lines.
This document is applicable to applications using:
- continuous data transmission,
- continuous supervision of train movements by train protection profile, and
- localisation of trains by onboard UGTMS equipment (reporting trains), and optionally by external wayside (and optionally onboard) device.
The IEC 62290 series specifies the functional, system and interface requirements for the command, control, and management systems intended to be used on urban, guided passenger transport lines and networks.
These systems are designated herein as urban guided transport management and command/control systems (UGTMS). UGTMS cover a wide range of operations needs from non-automated (GOA1) to unattended (GOA4) operation. A line may be equipped with UGTMS on its full length or only partly equipped.
The IEC 62290 series does not specifically address security issues. However, aspects of safety requirements may apply to ensuring security within the urban guided transit system.
The main objectives of this series are as follows:
- to provide a baseline system description and functional requirements specification for a transport authority to use in a request for proposal,
- to provide recommendations for those transport authorities wishing to acquire an interoperable or interchangeable system.
It is the responsibility of the transport authority concerned to decide on how to apply the IEC 62290 series and to take into account their particular needs.
This document is applicable to applications using:
- continuous data transmission,
- continuous supervision of train movements by train protection profile, and
- localisation of trains by onboard UGTMS equipment (reporting trains), and optionally by external wayside (and optionally onboard) device.
This third edition cancels and replaces the second edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) Figure 3, giving the system environment of UGTMS, has been amended to reflect the adaptation of it;
b) external equipment for which no requirement is described in the IEC 62290 series has been removed;
c) new external equipment having such requirements (like the washing machine) has been added.
- Standard66 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...