IEC 62676-2-3:2013

IEC 62676-2-3 ®
Edition 1.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Video surveillance systems for use in security applications –
Part 2-3: Video transmission protocols – IP interoperability implementation
based on Web services
Systèmes de vidéosurveillance destinés à être utilisés dans les applications
de sécurité –
Partie 2-3: Protocoles de transmission vidéo – Mise en œuvre de
l'interopérabilité IP en fonction des services Web

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,

please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les

microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.

Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette

publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

Useful links:
IEC publications search - www.iec.ch/searchpub Electropedia - www.electropedia.org
The advanced search enables you to find IEC publications The world's leading online dictionary of electronic and
by a variety of criteria (reference number, text, technical electrical terms containing more than 30 000 terms and
committee,…). definitions in English and French, with equivalent terms in
It also gives information on projects, replaced and additional languages. Also known as the International
withdrawn publications. Electrotechnical Vocabulary (IEV) on-line.

IEC Just Published - webstore.iec.ch/justpublished Customer Service Centre - webstore.iec.ch/csc
Stay up to date on all new IEC publications. Just Published If you wish to give us your feedback on this publication
details all new publications released. Available on-line and or need further assistance, please contact the
also once a month by email. Customer Service Centre: csc@iec.ch.

A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.

Liens utiles:
Recherche de publications CEI - www.iec.ch/searchpub Electropedia - www.electropedia.org
La recherche avancée vous permet de trouver des Le premier dictionnaire en ligne au monde de termes
publications CEI en utilisant différents critères (numéro de électroniques et électriques. Il contient plus de 30 000
référence, texte, comité d’études,…). termes et définitions en anglais et en français, ainsi que
Elle donne aussi des informations sur les projets et les les termes équivalents dans les langues additionnelles.
publications remplacées ou retirées. Egalement appelé Vocabulaire Electrotechnique
International (VEI) en ligne.
Just Published CEI - webstore.iec.ch/justpublished
Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications de la CEI.
Just Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur
Disponible en ligne et aussi une fois par mois par email. cette publication ou si vous avez des questions
contactez-nous: csc@iec.ch.
IEC 62676-2-3 ®
Edition 1.0 2013-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Video surveillance systems for use in security applications –

Part 2-3: Video transmission protocols – IP interoperability implementation

based on Web services
Systèmes de vidéosurveillance destinés à être utilisés dans les applications

de sécurité –
Partie 2-3: Protocoles de transmission vidéo – Mise en œuvre de

l'interopérabilité IP en fonction des services Web

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 13.320 ISBN 978-2-8322-1189-2

– 2 – 62676-2-3  IEC:2013
CONTENTS
FOREWORD . 21

INTRODUCTION . 23

1 Scope . 24

2 Normative references . 26

3 Terms, definitions and abbreviations . 29

3.1 Terms and definitions . 29

3.2 Abbreviations . 32

4 Overview . 34
4.1 Web services . 34
4.2 IP configuration . 35
4.3 Device discovery . 35
4.4 Device types . 36
4.5 Device management . 36
4.5.1 Capabilities . 36
4.5.2 Network . 37
4.5.3 System . 37
4.5.4 Retrieval of system information . 37
4.5.5 Firmware upgrade . 38
4.5.6 System restore . 38
4.5.7 Security . 38
4.6 DeviceIO . 38
4.7 Imaging configuration . 39
4.8 Media configuration . 39
4.8.1 General . 39
4.8.2 Media profiles . 39
4.9 Real-time streaming . 43
4.10 Event handling . 44
4.11 PTZ control . 44
4.12 Video analytics . 45
4.13 Analytics device . 47
4.14 Display . 47
4.15 Receiver . 47
4.15.1 General . 47

4.15.2 Synchronization points . 48
4.16 Storage . 48
4.16.1 Storage model . 48
4.16.2 Recording . 49
4.16.3 Search . 50
4.16.4 Replay . 50
4.17 Security . 50
5 Web Services framework . 51
5.1 Services overview . 51
5.1.1 General . 51
5.1.2 Services requirements . 52
5.2 WSDL overview . 52
5.3 Namespaces . 53

62676-2-3  IEC:2013 – 3 –
5.4 Types . 55

5.5 Messages . 55

5.6 Operations . 56

5.6.1 One-way operation type . 57

5.6.2 Request-response operation type . 58

5.7 Port types . 58

5.8 Binding . 58

5.9 Ports . 58

5.10 Services . 58

5.11 Error handling . 58

5.11.1 Protocol errors . 59
5.11.2 SOAP errors . 59
5.12 Security . 62
5.12.1 User-based access control . 62
5.12.2 User token profile . 63
6 IP configuration . 64
7 Device discovery . 65
7.1 General . 65
7.2 Modes of operation . 65
7.3 Discovery definitions . 66
7.3.1 Endpoint reference . 66
7.3.2 Hello . 66
7.3.3 Probe and probe match . 68
7.3.4 Resolve and resolve match . 68
7.3.5 Bye . 68
7.3.6 SOAP fault messages . 69
7.4 Remote discovery extensions . 69
7.4.1 Network scenarios . 69
7.4.2 Discover proxy (DP) . 71
7.4.3 Remote Hello and Probe behaviour . 72
7.4.4 Client behaviour . 73
7.4.5 Security . 73
8 Device management . 74
8.1 Capabilities . 74
8.1.1 Get WSDL URL . 74

8.1.2 Capability exchange . 75
8.2 Network . 78
8.2.1 Get hostname . 78
8.2.2 Set hostname . 78
8.2.3 Get DNS settings . 79
8.2.4 Set DNS settings . 80
8.2.5 Get NTP settings . 81
8.2.6 Set NTP settings . 82
8.2.7 Get dynamic DNS settings . 83
8.2.8 Set dynamic DNS settings . 84
8.2.9 Get network interface configuration . 85
8.2.10 Set network interface configuration . 85
8.2.11 Get network protocols . 87
8.2.12 Set network protocols . 88

– 4 – 62676-2-3  IEC:2013
8.2.13 Get default gateway . 88

8.2.14 Set default gateway . 89

8.2.15 Get zero configuration . 90

8.2.16 Set zero configuration . 90

8.2.17 Get IP address filter . 91

8.2.18 Set IP address filter . 92

8.2.19 Add an IP filter address . 92

8.2.20 Remove an IP filter address. 93

8.2.21 IEEE 802.11 configuration . 94

8.3 System . 99

8.3.1 Device Information. 99
8.3.2 Get System URIs . 100
8.3.3 Backup . 101
8.3.4 Restore . 101
8.3.5 Start system restore . 102
8.3.6 Get system date and time . 103
8.3.7 Set system date and time . 104
8.3.8 Factory default . 105
8.3.9 Firmware upgrade . 106
8.3.10 Start firmware upgrade . 107
8.3.11 Get system logs . 108
8.3.12 Get support information . 109
8.3.13 Reboot . 110
8.3.14 Get scope parameters . 110
8.3.15 Set scope parameters . 111
8.3.16 Add scope parameters . 112
8.3.17 Remove scope parameters . 113
8.3.18 Get discovery mode . 113
8.3.19 Set discovery mode . 114
8.3.20 Get remote discovery mode . 114
8.3.21 Set remote discovery mode . 115
8.3.22 Get remote DP addresses . 115
8.3.23 Set remote DP addresses . 116
8.4 Security . 116
8.4.1 Get access policy . 116

8.4.2 Set access policy . 117
8.4.3 Get users. 117
8.4.4 Create users . 118
8.4.5 Delete users . 119
8.4.6 Set users settings . 120
8.4.7 IEEE 802.1X configuration . 121
8.4.8 Create self-signed certificate . 126
8.4.9 Get certificates . 127
8.4.10 Get CA certificates . 128
8.4.11 Get certificate status. 128
8.4.12 Set certificate status . 129
8.4.13 Get certificate request . 129
8.4.14 Get client certificate status . 130
8.4.15 Set client certificate status . 131

62676-2-3  IEC:2013 – 5 –
8.4.16 Load device certificate . 131

8.4.17 Load device certificates in conjunction with its private key . 132

8.4.18 Get certificate information request . 133

8.4.19 Load CA certificates . 134

8.4.20 Delete certificate . 135

8.4.21 Get remote user . 136

8.4.22 Set remote user . 137

8.4.23 Get endpoint reference . 138

8.5 Input/Output (I/O) . 138

8.5.1 Get relay outputs . 139

8.5.2 Set relay output settings . 139
8.5.3 Trigger relay output . 140
8.5.4 Auxiliary operation . 141
8.6 Service specific fault codes . 142
9 Device IO Service . 148
9.1 VideoOutputs . 148
9.1.1 General . 148
9.1.2 GetVideoOutputs . 148
9.2 VideoOutputConfiguration . 149
9.2.1 GetVideoOutputConfiguration . 149
9.2.2 SetVideoOutputConfiguration . 149
9.2.3 GetVideoOutputConfigurationOptions . 150
9.3 VideoSources . 151
9.3.1 General . 151
9.3.2 GetVideoSources. 151
9.4 VideoSourceConfiguration . 152
9.4.1 GetVideoSourceConfiguration. 152
9.4.2 SetVideoSourceConfiguration . 153
9.4.3 GetVideoSourceConfigurationOptions . 153
9.5 AudioOutputs . 154
9.5.1 General . 154
9.5.2 GetAudioOutputs . 154
9.6 AudioOutputConfiguration . 155
9.6.1 GetAudioOutputConfiguration . 155
9.6.2 SetAudioOutputConfiguration . 156

9.6.3 GetAudioOutputConfigurationOptions . 156
9.7 AudioSources . 157
9.7.1 General . 157
9.7.2 GetAudioSources. 157
9.8 AudioSourceConfiguration . 158
9.8.1 GetAudioSourceConfiguration. 158
9.8.2 SetAudioSourceConfiguration . 159
9.8.3 GetAudioSourceConfigurationOptions . 159
9.9 Relay outputs . 160
9.9.1 Get relay outputs . 160
9.9.2 Set relay output settings . 161
9.9.3 Trigger relay output . 162
9.10 Service specific fault codes . 163
10 Imaging configuration . 164

– 6 – 62676-2-3  IEC:2013
10.1 Imaging settings . 164

10.1.1 Get imaging settings . 165

10.1.2 Set imaging settings . 166

10.1.3 Get options . 167

10.1.4 Move . 168

10.1.5 Get move options . 169

10.1.6 Stop . 170

10.1.7 Get imaging status. 171

10.2 Service specific fault codes . 172

11 Media configuration . 173

11.1 Audio and video codecs. 173
11.2 Media profile . 173
11.2.1 Create media profile . 174
11.2.2 Get media profiles . 175
11.2.3 Get media profile . 176
11.2.4 Add video source configuration to a profile . 177
11.2.5 Add video encoder configuration to a profile . 177
11.2.6 Add audio source configuration to a profile . 178
11.2.7 Add audio encoder configuration to a profile . 179
11.2.8 Add PTZ configuration to a profile . 180
11.2.9 Add video analytics configuration to a profile . 181
11.2.10 Add metadata configuration to a profile . 182
11.2.11 Add audio output configuration . 183
11.2.12 Add audio decoder configuration . 184
11.2.13 Remove video source configuration from a profile . 185
11.2.14 Remove video encoder configuration from a profile . 186
11.2.15 Remove audio source configuration from a profile . 187
11.2.16 Remove audio encoder configuration from a profile . 188
11.2.17 Remove PTZ configuration from a profile . 189
11.2.18 Remove video analytics configuration from a profile . 190
11.2.19 Remove metadata configuration from a profile . 191
11.2.20 Remove audio output configuration . 192
11.2.21 Remove audio decoder configuration . 193
11.2.22 Delete media profile . 194
11.3 Video source . 195

11.3.1 General . 195
11.3.2 GetVideoSources. 195
11.4 Video source configuration . 196
11.4.1 Get video source configurations. 196
11.4.2 Get video source configuration . 197
11.4.3 Get compatible video source configurations . 197
11.4.4 Get video source configuration options . 198
11.4.5 Modify a video source configuration . 199
11.5 Video encoder configuration . 200
11.5.1 Get video encoder configurations . 201
11.5.2 Get video encoder configuration . 201
11.5.3 Get compatible video encoder configurations . 202
11.5.4 Get video encoder configuration options . 203
11.5.5 Modify a video encoder configuration . 204

62676-2-3  IEC:2013 – 7 –
11.5.6 Get guaranteed number of video encoder instances . 205

11.6 Audio source . 206

11.6.1 General . 206

11.6.2 Get audio sources . 206

11.7 Audio source configuration . 207

11.7.1 Get audio source configurations . 207

11.7.2 Get audio source configuration . 208

11.7.3 Get compatible audio source configurations . 209

11.7.4 Get audio source configuration options . 210

11.7.5 Modify an audio source configuration . 211

11.8 Audio encoder configuration . 212
11.8.1 Get audio encoder configurations . 213
11.8.2 Get audio encoder configuration . 213
11.8.3 Get compatible audio encoder configurations . 214
11.8.4 Get audio encoder configuration options . 215
11.8.5 Modify audio encoder configurations . 217
11.9 Video analytics configuration . 217
11.9.1 Get video analytics configurations . 218
11.9.2 Get video analytics configuration . 218
11.9.3 Get compatible video analytics configurations . 219
11.9.4 Modify a video analytics configuration . 220
11.10 Metadata configuration . 222
11.10.1 Get metadata configurations . 222
11.10.2 Get metadata configuration . 223
11.10.3 Get compatible metadata configurations . 223
11.10.4 Get metadata configuration options . 224
11.10.5 Modify a metadata configuration . 225
11.11 Audio outputs . 226
11.11.1 General . 226
11.11.2 Get audio outputs . 226
11.12 Audio output configuration . 227
11.12.1 Get audio output configurations . 227
11.12.2 Get audio output configuration . 228
11.12.3 Get compatible audio output configurations . 229
11.12.4 Get audio output configuration options. 229

11.12.5 Modify audio output configuration . 231
11.13 Audio decoder configuration . 231
11.13.1 Get audio decoder configurations . 232
11.13.2 Get audio decoder configuration . 232
11.13.3 Get compatible audio decoder configurations . 233
11.13.4 Get audio decoder configuration options . 234
11.13.5 Modify audio decoder configuration . 235
11.14 Audio channel modes . 236
11.15 Stream URI . 237
11.15.1 General . 237
11.15.2 Request stream URI . 237
11.16 Snapshot . 239
11.16.1 General . 239
11.16.2 Request snapshot URI . 239

– 8 – 62676-2-3  IEC:2013
11.17 Multicast . 239

11.17.1 Start multicast streaming . 240

11.17.2 Stop multicast streaming . 240

11.18 Synchronization points . 241

11.18.1 General . 241

11.18.2 Set synchronization point. 241

11.19 Service specific fault codes . 242

12 Real time streaming . 243

12.1 Media stream protocol . 244

12.1.1 Transport format . 244
12.1.2 Media transport . 244
12.1.3 Synchronization point . 249
12.1.4 JPEG over RTP . 249
12.2 Media control protocol . 252
12.2.1 Stream control . 252
12.3 Back channel connection . 257
12.3.1 RTSP Require – Tag . 257
12.3.2 Connection setup for a bi- directional connection . 258
12.3.3 Multicast streaming. 260
12.4 Error handling . 260
13 Receiver configuration . 260
13.1 Persistence . 260
13.2 Receiver modes . 260
13.3 Receiver commands . 261
13.3.1 Get receivers . 261
13.3.2 Get receiver . 261
13.3.3 Create receiver . 262
13.3.4 Delete receiver . 262
13.3.5 Configure receiver . 263
13.3.6 SetReceiverMode . 263
13.3.7 GetReceiverState . 264
13.4 Events . 264
13.4.1 ChangeState . 264
13.4.2 Connection Failed . 265
13.5 Service specific fault codes . 265

14 Display service . 265
14.1 Panes . 266
14.1.1 GetPaneConfigurations . 266
14.1.2 GetPaneCo
...