IEC 62061:2005/COR1:2005
(Corrigendum)Corrigendum 1 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
Corrigendum 1 - Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
Corrigendum 1 - Sécurité des machines - Sécurité fonctionnelle des systèmes de commande électriques, électroniques et électroniques programmables relatifs à la sécurité
General Information
Relations
Standards Content (Sample)
CEI 62061 IEC 62061
(Première édition – 2005) (First edition – 2005)
Sécurité des machines – Sécurité fonctionnelle Safety of machinery – Functional safety of
des systèmes de commande safety-related electrical, electronic and
électriques, électroniques et électroniques programmable electronic control systems
programmables relatifs à la sécurité
CORRIGENDUM 1
Pa
...
This May Also Interest You
IEC 62061:2021 specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a coordinated manner.
This document is a machinery sector specific standard within the framework of IEC 61508 (all parts).
The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document.
The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode.
This document:
– is concerned only with functional safety requirements intended to reduce the risk of hazardous situations;
– is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a coordinated manner;
This document does not cover
– electrical hazards arising from the electrical control equipment itself (e.g. electric shock - see IEC 60204-1);
– other safety requirements necessary at the machine level such as safeguarding;
– specific measures for security aspects – see IEC TR 63074.
This document is not intended to limit or inhibit technological advancement.
IEC 62061:2021 cancels and replaces the first edition, published in 2005, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– structure has been changed and contents have been updated to reflect the design process of the safety function,
– standard extended to non-electrical technologies,
– definitions updated to be aligned with IEC 61508-4,
– functional safety plan introduced and configuration management updated (Clause 4),
– requirements on parametrization expanded (Clause 6),
– reference to requirements on security added (Subclause 6.8),
– requirements on periodic testing added (Subclause 6.9),
– various improvements and clarification on architectures and reliability calculations (Clause 6 and Clause 7),
– shift from "SILCL" to "maximum SIL" of a subsystem (Clause 7),
– use cases for software described including requirements (Clause 8),
– requirements on independence for software verification (Clause 8) and validation activities (Clause 9) added,
– new informative annex with examples (Annex G),
– new informative annexes on typical MTTFD values, diagnostics and calculation methods for the architectures (Annex C, Annex D and Annex H).
- Standard289 pagesEnglish languagesale 15% off
- Standard304 pagesEnglish and French languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC TS 63394:2023 In the context of the safety of machinery, the sector standard IEC 62061, along with ISO 13849 1, provides requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1.
This document:
– gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;
– considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions;
– gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution.
Therefore, the basis for these guidelines and additional requirements is
– a typical classification of safety functions;
– a consideration of typical architectures used for designing safety functions;
– a consideration of modes of operation of safety functions;
– the derivation and evaluation of PFH formulas for subsystems considering the used technology.
This document does not address low demand mode of operation according to IEC 61508.
This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure.
This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS.
- Technical specification142 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
- Standard18 pagesEnglish and French languagesale 15% off
specifies requirements and makes recommendations for the design, integration and validation of safety-related electrical, electronic and programmable electronic control systems (SRECS) for machines (see Notes 1 and 2). It is applicable to control systems used, either singly or in combination, to carry out safety-related control functions on machines that are not portable by hand while working, including a group of machines working together in a co-ordinated manner. The contents of the corrigenda of July 2005 and April 2008 have been included in this copy.
- Standard10 pagesEnglish and French languagesale 15% off
- Standard205 pagesEnglish and French languagesale 15% off
- Standard204 pagesEnglish and French languagesale 15% off
- Standard387 pagesEnglish and French languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC 62061:2021 specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines. It is applicable to control systems used, either singly or in combination, to carry out safety functions on machines that are not portable by hand while working, including a group of machines working together in a coordinated manner.
This document is a machinery sector specific standard within the framework of IEC 61508 (all parts).
The design of complex programmable electronic subsystems or subsystem elements is not within the scope of this document.
The main body of this sector standard specifies general requirements for the design, and verification of a safety-related control system intended to be used in high/continuous demand mode.
This document:
– is concerned only with functional safety requirements intended to reduce the risk of hazardous situations;
– is restricted to risks arising directly from the hazards of the machine itself or from a group of machines working together in a coordinated manner;
This document does not cover
– electrical hazards arising from the electrical control equipment itself (e.g. electric shock - see IEC 60204-1);
– other safety requirements necessary at the machine level such as safeguarding;
– specific measures for security aspects – see IEC TR 63074.
This document is not intended to limit or inhibit technological advancement.
IEC 62061:2021 cancels and replaces the first edition, published in 2005, Amendment 1:2012 and Amendment 2:2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
– structure has been changed and contents have been updated to reflect the design process of the safety function,
– standard extended to non-electrical technologies,
– definitions updated to be aligned with IEC 61508-4,
– functional safety plan introduced and configuration management updated (Clause 4),
– requirements on parametrization expanded (Clause 6),
– reference to requirements on security added (Subclause 6.8),
– requirements on periodic testing added (Subclause 6.9),
– various improvements and clarification on architectures and reliability calculations (Clause 6 and Clause 7),
– shift from "SILCL" to "maximum SIL" of a subsystem (Clause 7),
– use cases for software described including requirements (Clause 8),
– requirements on independence for software verification (Clause 8) and validation activities (Clause 9) added,
– new informative annex with examples (Annex G),
– new informative annexes on typical MTTFD values, diagnostics and calculation methods for the architectures (Annex C, Annex D and Annex H).
- Standard289 pagesEnglish languagesale 15% off
- Standard304 pagesEnglish and French languagesale 15% off
IEC TS 63394:2023 In the context of the safety of machinery, the sector standard IEC 62061, along with ISO 13849 1, provides requirements to manufacturers of machines for the design, development and integration of safety-related control systems (SCS) or safety-related parts of control systems (SRP/CS), depending on technology used (mechanical, pneumatic, hydraulic or electrical technologies) to perform safety function(s). This document does not replace ISO 13849-1 and IEC 62061. This document gives additional guidance to the application of IEC 62061 or ISO 13849-1.
This document:
– gives guidelines and specifies additional requirements for specific safety functions based on the methodology of ISO 12100, which are relevant in machinery and respecting typical boundary conditions of machinery;
– considers safety functions which are designed for high demand mode of operation yet are rarely operated, called rarely activated safety functions;
– gives additional information for the calculation of failure rates using other (non-electronic) technologies based e.g. on Weibull distribution, because all the formula defined in IEC 62061 and ISO 13849-1 are based on exponential distribution.
Therefore, the basis for these guidelines and additional requirements is
– a typical classification of safety functions;
– a consideration of typical architectures used for designing safety functions;
– a consideration of modes of operation of safety functions;
– the derivation and evaluation of PFH formulas for subsystems considering the used technology.
This document does not address low demand mode of operation according to IEC 61508.
This document does not take into account either layer of protection analysis (LOPA) or basic process control system (BPCS), according to IEC 61511 as a risk reduction measure.
This document considers all lifecycle phases of the machine regarding functional safety, and SCS or SRP/CS.
- Technical specification142 pagesEnglish languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.