iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61249-2-45:2018

(Main)

Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly

Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly

IEC 61249-2-45:2018 gives requirements for properties of non-halogenated epoxide non‑woven reinforced core/woven E-glass reinforced surface laminate sheets of thermal conductivity and defined flammability (vertical burning test), copper-clad for lead-free assembly in thicknesses of 0,60 mm up to 1,70 mm. The flammability rating is achieved through the use of non-halogenated fire retardants reacted as part of the epoxide polymeric structure. The glass transition temperature is defined to be 105 °C minimum. Thermal conductivity is defined to be (1,0 ± 0,15) W/(m•K).

Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-45: Matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées renforcées en verre de type E tissé/non tissé époxyde non halogéné, de conductivité thermique 1,0 W/(m•K) et d'inflammabilité définie (essai de combustion verticale), plaquées cuivre pour les assemblages sans plomb

L'IEC 61249-2-45:2018 fournit des exigences concernant les propriétés des feuilles stratifiées de surface renforcée en verre de type E tissé et à cœur renforcé non tissé époxyde non halogéné, de conductivité thermique et d'inflammabilité définie (essai de combustion verticale), plaquées cuivre pour les assemblages sans plomb, d'épaisseurs comprises entre 0,60 mm et 1,70 mm. Les caractéristiques d'inflammabilité sont obtenues en faisant réagir des ignifuges non halogénés qui font partie de la structure polymère époxyde. La température de transition vitreuse est définie comme étant d'au moins 105 °C. La conductivité thermique est définie comme étant de (1,0 ± 0,15) W/(m•K).

General Information

Status
Published
Publication Date
09-Jan-2018
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
31.180 - Printed circuits and boards
Technical Committee
TC 91 - Electronics assembly technology
Drafting Committee
WG 4 - TC 91/WG 4
Current Stage
PPUB - Publication issued
Start Date
16-Jan-2018
Completion Date
10-Jan-2018
Ref Project

Buy Standard

IEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assemblyIEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
PreviousNext
Standard
IEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
English language
22 pages
sale 15% off
Preview
sale 15% off
Preview
IEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assemblyIEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
PreviousNext
Standard
IEC 61249-2-45:2018 - Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly
English and French language
45 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61249-2-45 ®
Edition 1.0 2018-01
INTERNATIONAL
STANDARD
Materials for printed boards and other interconnecting structures –
Part 2-45: Reinforced base materials clad and unclad – Non-halogenated
epoxide non-woven/woven E-glass reinforced laminate sheets of thermal
conductivity 1,0 W/(m•K) and defined flammability (vertical burning test),
copper-clad for lead-free assembly
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
IEC 61249-2-45 ®
Edition 1.0 2018-01
INTERNATIONAL
STANDARD
Materials for printed boards and other interconnecting structures –

Part 2-45: Reinforced base materials clad and unclad – Non-halogenated

epoxide non-woven/woven E-glass reinforced laminate sheets of thermal

conductivity 1,0 W/(m•K) and defined flammability (vertical burning test),

copper-clad for lead-free assembly

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.180 ISBN 978-2-8322-5197-3

– 2 – IEC 61249-2-45:2018 © IEC 2018
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions. 6
4 Materials and construction . 7
4.1 General . 7
4.2 Resin system . 7
4.3 Metal foil . 7
4.4 Reinforcement . 7
5 Electrical properties . 7
6 Non-electrical properties of the copper-clad laminate . 8
6.1 Appearance of the copper-clad sheet. 8
6.1.1 General . 8
6.1.2 Indentations (pits and dents) . 8
6.1.3 Wrinkles . 8
6.1.4 Scratches . 8
6.1.5 Raised areas . 9
6.2 Appearance of the unclad face . 9
6.3 Laminate thickness . 9
6.4 Bow and twist . 9
6.5 Properties related to the copper foil bond . 10
6.6 Punching and machining . 11
6.7 Dimensional stability. 11
6.8 Sheet sizes . 11
6.8.1 Typical sheet sizes . 11
6.8.2 Tolerances for sheet sizes . 11
6.9 Cut panels. 12
6.9.1 Cut panel sizes . 12
6.9.2 Size tolerances for cut panels . 12
6.9.3 Rectangularity of cut panels . 12
6.10 Thermal conductivity . 12
7 Non-electrical properties of the base material after complete removal of the copper
foil . 13
7.1 Appearance of the dielectric base material . 13
7.2 Flexural strength . 13
7.3 Flammability . 13
7.4 Water absorption . 14
7.5 Measling . 14
7.6 Glass transition temperature and cure factor . 14
7.7 Decomposition temperature . 15
7.8 Time to delamination (TMA) . 15
7.9 Halogen content . 15
8 Quality assurance . 15
8.1 Quality system . 15
8.2 Responsibility for inspection . 16
8.3 Qualification inspection . 16
8.4 Quality conformance inspection . 16

8.5 Certificate of conformance . 16
8.6 Safety data sheet . 16
9 Packaging and marking . 16
10 Ordering information . 17
Annex A (informative) Engineering information . 18
A.1 General . 18
A.2 Chemical properties . 18
A.3 Electrical properties . 18
A.4 Flammability properties . 18
A.5 Mechanical properties . 18
A.6 Physical properties . 18
A.7 Thermal properties . 19
Annex B (informative) Common laminate constructions . 20
Annex C (informative) Guideline for qualification and conformance inspection . 21
Bibliography . 22

Table 1 – Electrical properties . 7
Table 2 – Size of indentations . 8
Table 3 – Nominal thickness and tolerance of metal-clad laminate . 9
Table 4 – Bow and twist requirements . 10
Table 5 – Pull-off and peel strength requirements . 10
Table 6 – Dimensional stability . 11
Table 7 – Size tolerances for cut panels . 12
Table 8 – Rectangularity of cut panels . 12
Table 9 – Thermal conductivity . 12
Table 10 – Flexural strength requirements . 13
Table 11 – Flammability requirements . 14
Table 12 – Water absorption requirements . 14
Table 13 – Measling requirements . 14
Table 14 – Glass transition temperature and cure factor requirements . 15
Table 15 – Decomposition temperature requirements . 15
Table 16 – Time to delamination requirements. 15
Table 17 – Halogen content . 15
Table C.1 – Qualification and conformance inspection . 21

– 4 – IEC 61249-2-45:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MATERIALS FOR PRINTED BOARDS AND OTHER
INTERCONNECTING STRUCTURES –
Part 2-45: Reinforced base materials clad and unclad – Non-halogenated
epoxide non-woven/woven E-glass reinforced laminate sheets of
thermal conductivity 1,0 W/(m•K) and defined flammability
(vertical burning test), copper-clad for lead-free assembly

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International St
...


IEC 61249-2-45 ®
Edition 1.0 2018-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Materials for printed boards and other interconnecting structures –
Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide
non-woven/woven E-glass reinforced laminate sheets of thermal conductivity
1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for
lead-free assembly
Matériaux pour circuits imprimés et autres structures d'interconnexion –
Partie 2-45: Matériaux de base renforcés, plaqués et non plaqués – Feuilles
stratifiées renforcées en verre de type E tissé/non tissé époxyde non halogéné,
de conductivité thermique 1,0 W/(m•K) et d'inflammabilité définie (essai de
combustion verticale), plaquées cuivre pour les assemblages sans plomb

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61249-2-45 ®
Edition 1.0 2018-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Materials for printed boards and other interconnecting structures –

Part 2-45: Reinforced base materials clad and unclad – Non-halogenated epoxide

non-woven/woven E-glass reinforced laminate sheets of thermal conductivity

1,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for

lead-free assembly
Matériaux pour circuits imprimés et autres structures d'interconnexion –

Partie 2-45: Matériaux de base renforcés, plaqués et non plaqués – Feuilles

stratifiées renforcées en verre de type E tissé/non tissé époxyde non halogéné,

de conductivité thermique 1,0 W/(m•K) et d'inflammabilité définie (essai de

combustion verticale), plaquées cuivre pour les assemblages sans plomb

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.180 ISBN 978-2-8322-9095-8

– 2 – IEC 61249-2-45:2018 © IEC 2018
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Materials and construction . 6
4.1 General . 6
4.2 Resin system . 7
4.3 Metal foil . 7
4.4 Reinforcement . 7
5 Electrical properties . 7
6 Non-electrical properties of the copper-clad laminate . 7
6.1 Appearance of the copper-clad sheet . 7
6.1.1 General . 7
6.1.2 Indentations (pits and dents) . 8
6.1.3 Wrinkles . 8
6.1.4 Scratches . 8
6.1.5 Raised areas . 8
6.2 Appearance of the unclad face . 9
6.3 Laminate thickness . 9
6.4 Bow and twist . 9
6.5 Properties related to the copper foil bond . 10
6.6 Punching and machining . 11
6.7 Dimensional stability . 11
6.8 Sheet sizes . 11
6.8.1 Typical sheet sizes . 11
6.8.2 Tolerances for sheet sizes . 11
6.9 Cut panels . 12
6.9.1 Cut panel sizes . 12
6.9.2 Size tolerances for cut panels . 12
6.9.3 Rectangularity of cut panels . 12
6.10 Thermal conductivity . 12
7 Non-electrical properties of the base material after complete removal of the
copper foil . 13
7.1 Appearance of the dielectric base material . 13
7.2 Flexural strength . 13
7.3 Flammability . 13
7.4 Water absorption . 14
7.5 Measling . 14
7.6 Glass transition temperature and cure factor . 15
7.7 Decomposition temperature . 15
7.8 Time to delamination (TMA) . 15
7.9 Halogen content . 15
8 Quality assurance . 16
8.1 Quality system . 16
8.2 Responsibility for inspection . 16
8.3 Qualification inspection . 16

8.4 Quality conformance inspection . 16
8.5 Certificate of conformance . 16
8.6 Safety data sheet . 16
9 Packaging and marking . 16
10 Ordering information . 17
Annex A (informative) Engineering information . 18
A.1 General . 18
A.2 Chemical properties . 18
A.3 Electrical properties . 18
A.4 Flammability properties . 18
A.5 Mechanical properties . 18
A.6 Physical properties . 18
A.7 Thermal properties . 19
Annex B (informative) Common laminate constructions . 20
Annex C (informative) Guideline for qualification and conformance inspection . 21
Bibliography . 22

Table 1 – Electrical properties .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61189-5-504:2020(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Process ionic contamination testing (PICT)

IEC 61189-5-504:2020 is a test method designed to determine the proportion of soluble ionic residues present upon a circuit board, electronic component or assembly. The conductivity of the solution used to dissolve the ionic residues is measured to evaluate the level of ionic residues.

  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC TR 61191-7:2020(Main)
Printed board assemblies - Part 7: Technical cleanliness of components and printed board assemblies

IEC TR 61191-7:2020(E) serves as a Technical Report and provides information, how technical cleanliness can be assessed within the electronics assembly industry. Technical cleanliness concerns sources, analysis, reduction and control as well as associated risks of particulate matter, so-called foreign-object debris, on components and electronic assemblies in the electronics industry.

  • Technical report
    115 pages
    English language
    sale 15% off
IEC
IEC 62878-1:2019(Main)
Device embedding assembly technology - Part 1: Generic specification for device embedded substrates

IEC 62878-1:2019 specifies the generic requirements and test methods for device-embedded substrates. The basic test methods for printed board substrate materials and substrates themselves are specified in IEC 61189-3.
This part of IEC 62878 is applicable to device-embedded substrates fabricated by use of organic base material, which includes, for example, active or passive devices, discrete components formed in the fabrication process of electronic printed boards, and sheet-formed components.
The IEC 62878 series applies neither to the re-distribution layer (RDL) nor to electronic modules defined in IEC 62421.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    38 pages
    English and French language
    sale 15% off
IEC
IEC 62878-2-5:2019(Main)
Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for device embedded substrate

IEC 62878-2-5:2019 specifies requirements based on XML schema that represents a design data format for device embedded substrate, which is a board comprising embedded active and passive devices whose electrical connections are made by means of a via, electroplating, conductive paste or printing of conductive material.
This data format is to be used for simulation (e.g. stress, thermal, EMC), tooling, manufacturing, assembly, and inspection requirements. Furthermore, the data format is used for transferring information among printed board designers, printed board simulation engineer, manufacturers, and assemblers.
IEC 62878-2-5:2019 applies to substrates using organic material. It neither applies to the re-distribution layer (RDL) nor to the electronic modules defined as M-type business model in IEC 62421.

  • Standard
    53 pages
    English language
    sale 15% off
  • Standard
    112 pages
    English and French language
    sale 15% off
IEC
IEC TR 61189-5-506:2019(Main)
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-506: General test methods for materials and assemblies - An intercomparison evaluation to implement the use of fine-pitch test structures for surface insulation resistance (SIR) testing of solder fluxes in accordance with IEC 61189-5-501

IEC TR 61189-5-506:2019(E) is an intercomparison supporting the development of IEC 61189-5-501 in relation to the SIR method. This document sets out to validate the introduction of a new 200-µm gap SIR pattern, and was benched marked against existing SIR gap patterns of 318 µm and 500 µm.

  • Technical report
    23 pages
    English language
    sale 15% off
IEC
IEC 61188-6-4:2019(Main)
Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design - Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design

IEC 61188-6-4:2019 specifies generic requirements for dimensional drawings of SMD from the viewpoint of land pattern design.
The purpose of this document is to prevent land pattern design issues caused by lack of information and/or misuse of the information from SMD outline drawing as well as to improve the utilization of IEC 61188 series. This document is applicable to the SMD of semiconductor devices and electrical components.

  • Standard
    81 pages
    English and French language
    sale 15% off
IEC
IEC TR 62878-2-7:2019(Main)
Device embedding assembly technology - Part 2-7: Guidelines - Accelerated stress testing of passive embedded circuit boards

IEC TR 62878-2-7:2019 (E) describes the accelerated stress testing of passive embedded circuit boards. It can be used for screening finished boards, including multilayer and high-density interconnection (HDI) boards. These boards are mainly for mobile devices.

  • Technical report
    12 pages
    English language
    sale 15% off
IEC
IEC 61189-2-630:2018(Main)
Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-630: Test methods for materials for interconnection structures - Moisture absorption after pressure vessel conditioning

IEC 61189-2-630:2018 specifies a test method to determine the amount of water absorbed by metal-clad laminates after conditioning in a pressure vessel for 1 h, 2 h, 3 h, 4 h or 5 h.

  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 61249-2-47:2018(Main)
Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 2,0 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly

IEC 61249-2-47:2018 gives requirements for properties of non-halogenated epoxide non‑woven reinforced core/woven E-glass reinforced surface laminate sheets of thermal conductivity and defined flammability (vertical burning test), copper-clad for lead-free assembly in thicknesses of 0,60 mm up to 1,70 mm. The flammability rating is achieved through the use of non-halogenated fire retardants reacted as part of the epoxide polymeric structure. The glass transition temperature is defined to be 105 °C minimum. Thermal conductivity is defined to be (2,0 ± 0,30) W/(m•K).

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English and French language
    sale 15% off
IEC
IEC 61249-2-46:2018(Main)
Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity 1,5 W/(m•K) and defined flammability (vertical burning test), copper-clad for lead-free assembly

IEC 61249-2-46:2018 gives requirements for properties of non-halogenated epoxide non‑woven reinforced core/woven E-glass reinforced surface laminate sheets of thermal conductivity and defined flammability (vertical burning test), copper-clad for lead-free assembly in thicknesses of 0,60 mm up to 1,70 mm. The flammability rating is achieved through the use of non-halogenated fire retardants reacted as part of the epoxide polymeric structure. The glass transition temperature is defined to be 105 °C minimum. Thermal Conductivity is defined to be (1,5 ± 0,2) W/(m•K).

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English and French language
    sale 15% off