iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 60335-2-21:2012/AMD1:2018

(Amendment)

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

Amendement 1 - Appareils électrodomestiques et analogues - Sécurité - Partie 2-21: Règles particulières pour les chauffe-eau à accumulation

General Information

Status
Published
Publication Date
16-Aug-2018
ICS
01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION
13.120 - Domestic safety
91.140.65 - Water heating equipment
Technical Committee
TC 61 - Safety of household and similar electrical appliances
Drafting Committee
MT 37 - TC 61/MT 37
Current Stage
DELPUB - Deleted Publication
Completion Date
18-Oct-2022
Ref Project

Relations

Amends
IEC 60335-2-21:2012 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
Effective Date
05-Sep-2023
Revised
IEC 60335-2-21:2022 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
Effective Date
05-Sep-2023

Buy Standard

IEC 60335-2-21:2012/AMD1:2018 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heatersIEC 60335-2-21:2012/AMD1:2018 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
PreviousNext
Standard
IEC 60335-2-21:2012/AMD1:2018 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
English and French language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60335-2-21 ®
Edition 6.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –
Part 2-21: Particular requirements for storage water heaters

Appareils électrodomestiques et analogues – Sécurité –
Partie 2-21: Règles particulières pour les chauffe-eau à accumulation

IEC 60335-2-21:2012-11/AMD1:2018-08(en-fr)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.

IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.

IEC 60335-2-21 ®
Edition 6.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Household and similar electrical appliances – Safety –

Part 2-21: Particular requirements for storage water heaters

Appareils électrodomestiques et analogues – Sécurité –

Partie 2-21: Règles particulières pour les chauffe-eau à accumulation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 91.140.65 ISBN 978-2-8322-5946-7

– 2 – IEC 60335-2-21:2012/AMD1:2018
© IEC 2018
FOREWORD
This amendment has been prepared by IEC technical committee 61: Safety of household and
similar electrical appliances.
The text of this amendment is based on the following documents:
CDV Report on voting
61/5563/CDV 61/5650A/RVC
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 60335-2-21:2012(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

IEC 60335-2-21:2012 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard is also applicable to immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Such a unit shall comply with the requirements in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This sixth edition cancels and replaces the fifth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). The principal changes in this edition as compared with the fifth edition of IEC 60335-2-21 are as follows:
- added requirements for immersion heater units (fixed immersion heaters);
- removed reference to ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Storage, Immersion, Water, Heater
This publication is to be read in conjunction with IEC 60335-1:2010. The contents of the corrigendum of April 2013 have been included in this copy.

  • Standard
    54 pages
    English and French language
    sale 15% off
  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 60335-2-21:2012(Main)
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

IEC 60335-2-21:2012 deals with the safety of electric storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard is also applicable to immersion heater units intended to be retrofitted in a heat exchange closed water heater having provision for retrofitting. Such a unit shall comply with the requirements in Annex AA. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities, or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This sixth edition cancels and replaces the fifth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). The principal changes in this edition as compared with the fifth edition of IEC 60335-2-21 are as follows:
- added requirements for immersion heater units (fixed immersion heaters);
- removed reference to ISO 13732-1 from Bibliography. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Storage, Immersion, Water, Heater
This publication is to be read in conjunction with IEC 60335-1:2010. The contents of the corrigendum of April 2013 have been included in this copy.

  • Standard
    54 pages
    English and French language
    sale 15% off
  • Standard
    58 pages
    English and French language
    sale 15% off
IEC
IEC 60127-8:2018(Main)
Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection

IEC 60127-8:2018 relates to fuse resistors with particular overcurrent protection rated up to AC 500 V and/or DC 500 V for printed circuits and other substrate systems, used for the protection of electric appliances, electronic equipment and component parts thereof, normally intended to be used indoors.
It does not apply to fuse resistors with particular overcurrent protection for appliances intended to be used under special conditions, such as in a corrosive or explosive atmosphere.
The object of this part of IEC 60127 is
a) to establish uniform requirements for fuse resistors with particular overcurrent protection so as to protect appliances or parts of appliances in the most suitable way;
b) to define the performance of the fuse resistors with particular overcurrent protection, so as to give guidance to manufacturers of electrical appliances and electronic equipment and to ensure replacement of fuse resistors with particular overcurrent protection by those of similar dimensions and characteristics;
c) to establish uniform test methods for fuse resistors with particular overcurrent protection, so as to allow verification of the values (for example rated dissipation, functioning characteristic and rated breaking capacity values) specified by the manufacturer.
This part of IEC 60127 applies in addition to the requirements of IEC 60127-1.
This first edition of IEC 60127-8 cancels and replaces IEC PAS 60127-8:2014.
This international standard is to be used in conjunction with IEC 60127-1.
Keywords: Miniature Fuses, Fuse-Resistors, Overcurrent Protection

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    52 pages
    English language
    sale 15% off
  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC 61280-2-13:2024(Main)
Fibre optic communication subsystem test procedures - Part 2-13: Digital systems - Measurement of error vector magnitude

IEC 61280-2-13:2024 series defines a procedure for calculating the root-mean-square error vector magnitude of optical n-APSK signals from a set of measured symbols. It specifically defines the normalization of the reference states and a procedure for optimal scaling of the measured symbol states. The procedure described in this document applies to single-polarized optical signals as well as to conventional polarization-multiplexed signals with independently modulated polarization tributaries. In general, it is not advisable to apply these procedures without modification to signals, in which optical amplitude, phase, and polarization state are simultaneously modulated to encode the information data. This document does not specify any signal processing steps for extracting the symbols from the received optical signals, because these steps depend on the optical receiver and can vary with the type of the transmitted n-APSK signal. These and optional additional signal processing steps are defined in application-specific documents.

  • Standard
    49 pages
    English and French language
    sale 15% off
IEC
IEC 60127-8:2018/AMD1:2024(Amendment)
Amendment 1 - Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection
  • Standard
    13 pages
    English and French language
    sale 15% off
IEC
IEC 62024-1:2024(Main)
High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

IEC 62024-1:2024 is available as IEC 62024-1:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62024-1:2024 specifies the electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in the high frequency (over 100 kHz) range.
This edition includes the following significant technical changes with respect to the previous edition:
a) addition of S parameter measurement;
b) addition of the inductance, Q-factor and impedance of an inductor which are measured by the reflection coefficient method with a network analyzer;
c) addition of the resonance frequency of an inductor which is measured by a two-port network analyzer;
d) addition of the mounting method for a surface mounting inductor with Pb-free solder.

  • Standard
    102 pages
    English language
    sale 15% off
  • Standard
    63 pages
    English and French language
    sale 15% off
IEC
IEC 63412-1:2024(Main)
Ultrasonics - Shear-wave elastography - Part 1: Specifications for the user interface

IEC 63412-1:2024 specifies quantities and parameters which it is essential to provide to the user of shear-wave elastography systems, many in the image headers.
This document is applicable to medical-diagnostic, ultrasonic shear-wave elastography systems, exciting (internally or externally) shear waves and tracking their propagation within biological tissue.

  • Standard
    41 pages
    English and French language
    sale 15% off
IEC
IEC TS 62607-9-2:2024(Main)
Nanomanufacturing - Key control characteristics - Part 9-2: Nanomagnetic products - Magnetic field distribution: Magneto-optical indicator film technique

IEC TS 62607-9-2:2024, which is a Technical Specification, establishes a standardized method to determine the key control characteristic
• magnetic field distribution
of nanomagnetic materials, structures and devices by the
• magneto-optical indicator film technique.
The magnetic field distribution is derived by utilizing a magneto optical indicator film, which is a thin film of magneto-optic material that is placed on the surface of an object exhibiting a spatially varying magnetic field distribution. The Faraday effect is then employed to measure the magnetic field strength by analysing the rotation of the polarization plane of light passing through the magneto-optic film.
The method is applicable for measuring the stray field distribution of flat nanomagnetic materials, structures and devices.
- The method can especially be used to perform fast quantitative measurements of stray field distributions at the surface of an object.
- The magneto-optic indicator film technique (MOIF) is a fast, non-destructive method, making it an attractive option for materials analysis and testing in the industry.
- MOIF measurements can be done without any sample preparation and do not rely on specific surface properties of the object. It can be applied to the characterization of rough samples as well as of samples with non-magnetic cover layers.
- MOIF can quantitatively measure magnetic field distributions:
• with a one-shot measurement which typically takes a few seconds
• over areas of several square centimetres (over diameters of up to 15 cm with special techniques)
• in a field range from 1 mT to more than 100 mT
• with down to 1 µm spatial resolution
- Although techniques with nano-scale resolution are suitable for analysing the details of magnetic field structure, their ability to characterize larger areas is limited by their scanning area. Therefore, the MOIF technique is an indispensable complementary method that can offer a more comprehensive understanding of material properties.
This document focuses on the calibration procedures, calibrated measurement process, and evaluation of measurement uncertainty to ensure the traceability of quantitative magnetic field measurements obtained through the magneto-optic indicator film technique.

  • Technical specification
    771 pages
    English language
    sale 15% off
IEC
IEC TS 63336:2024(Main)
Commissioning of VSC HVDC systems

IEC TS 63336:2024, which is a technical specification, applies to the commissioning of voltage-sourced converter (VSC) high voltage direct current (HVDC) systems which consist of two converter stations and the connecting HVDC transmission line.
The tests are generally applied to all HVDC configurations and could require addition or deletion to match the given solution.
This document provides guidance on the planning of commissioning activities. The commissioning described in this document is implemented through on-site testing on the whole system functionality, including testing on the subsystem and system. This document provides the scope, procedures and acceptance criteria of the tests.
Factory system tests, on-site equipment tests, electrode tests, and trial operation are not included in this document.

  • Technical specification
    61 pages
    English language
    sale 15% off
IEC
IEC 63128:2019(Main)
Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear

IEC 63128:2019 specifies the analogue control interface of controlgear which has the function of controlling the output of the controlgear. The output of the controlgear is controlled between minimum/off and maximum values by the voltage control device sinking the controlgear current source.
This document does not specify safety requirements for the analogue interface of controlgear. Safety requirements are given in IEC 61347 (all parts).

  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English and French language
    sale 15% off