IEC 61347-2-7:2011
(Main)Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-7:2011 specifies particular safety requirements for battery supplied electronic controlgear for maintained and non-maintained emergency lighting purposes. It includes specific requirements for electronic controlgear and control units for self-contained luminaires for emergency lighting as specified by IEC 60598-2-22. This third edition cancels and replaces the second edition published in 2006. It constitutes a technical revision. Significant changes introduced into this third edition include:
- modification of IEC 61347-2-7 to become a standard exclusively for d.c. battery supplied electronic controlgear for emergency lighting (self-contained) IEC 61347-2-3 Annex J is intended to cover centrally supplied emergency controlgear;
- update of Clause 22 - Recharging devices;
- modification of Clause 20 battery voltage characterisation to support EBLF measurement. This to simplify and increase reproducibility of testing;
- rationalisation of requirements between IEC 61347-2-7 and IEC 60598-2-22 requirements of IEC 60598-2-22 being transferred to IEC 61347-2-7.
This publication is to be read in conjunction with IEC 61347-1:2007.
Appareillages de lampes - Partie 2-7: Règles particulières relatives aux appareillages électroniques alimentés par batterie pour l'éclairage de secours (autonome)
L'IEC 61347-2-7:2011 spécifie les exigences particulières de sécurité pour les appareillages électroniques alimentés par batterie prévus pour l'éclairage de secours permanent ou non permanent. Elle comprend des exigences particulières relatives aux appareillages électroniques et aux blocs de commande pour les blocs autonomes d'éclairage de secours spécifiés dans l'IEC 60598-2-22. Cette troisième édition annule et remplace la deuxième édition parue en 2006. Elle constitue une révision technique. Les changements significatifs introduits dans cette troisième édition incluent:
- des modifications de l'IEC 61347-2-7 en vue de devenir une norme exclusivement relative aux appareillages électroniques alimentés par batterie en courant continu pour l'éclairage de secours (autonome). L'IEC 61347-2-3, Annexe J, est destinée à couvrir les appareillages de secours à alimentation centrale;
- la mise à jour de l'Article 22 - Dispositifs de recharge;
- la modification de l'Article 20, caractérisation de la tension de la batterie pour étayer la mesure de l'EBLF. Il s'agit de simplifier et d'accroître la reproductibilité des essais;
- la rationalisation des exigences de l'IEC 61347-2-7 avec l'IEC 60598-2-22, les exigences de l'IEC 60598-2-2 étant transférées à l'IEC 61347-2-7.
Cette publication doit être lue conjointement avec l'IEC 61347-1:2007.
General Information
Relations
Buy Standard
Standards Content (Sample)
IEC 61347-2-7 ®
Edition 3.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery supplied electronic controlgear for
emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles particulières relatives aux appareillages électroniques
alimentés par batterie pour l’éclairage de secours (autonome)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.
IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 61347-2-7 ®
Edition 3.0 2011-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery supplied electronic controlgear for
emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles particulières relatives aux appareillages électroniques
alimentés par batterie pour l’éclairage de secours (autonome)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX V
ICS 29.140.99 ISBN 978-2-88912-830-3
– 2 – 61347-2-7 © IEC:2011
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 9
5 General notes on tests . 10
6 Classification . 10
7 Marking . 10
8 Protection against accidental contact with live parts . 12
9 Terminals . 12
10 Provisions for protective earthing . 12
11 Moisture resistance and insulation . 12
12 Electric strength . 12
13 Thermal endurance test for windings of ballasts . 12
14 Fault conditions . 12
15 Starting conditions . 12
16 Lamp current . 13
17 Supply current . 13
18 Maximum current in any lead (with cathode preheating) . 13
19 Lamp operating current waveforms . 13
20 Functional safety (EBLF) . 14
21 Changeover operation . 15
22 Recharging device . 16
23 Protection against excessive discharge . 18
24 Indicator . 19
25 Remote control, rest mode, inhibition mode . 19
26 Temperature cycling test and endurance test . 20
27 Polarity reversal . 20
28 Fault conditions . 21
29 Construction . 21
30 Creepage distances and clearances . 21
31 Screws, current-carrying parts and connections . 21
32 Resistance to heat, fire and tracking . 21
33 Resistance to corrosion . 21
34 Abnormal lamp conditions . 21
35 Protection of associated components . 26
Annex A (normative) Test to establish whether a conductive part is a live part, which
may cause an electric shock . 28
Annex B (normative) Particular requirements for thermally protected lamp controlgear . 28
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating . 28
61347-2-7 © IEC:2011 – 3 –
Annex D (normative) Requirements for carrying out the heating test of thermally
protected lamp controlgear . 28
Annex E (normative) Use of constant S other than 4 500 in t tests . 28
w
Annex F (normative) Draught-proof enclosure . 28
Annex G (normative) Explanation of the derivation of the values of pulse voltages . 29
Annex H (normative) Tests . 29
Annex I (normative) Batteries for emergency lighting luminaires . 29
Annex J (informative) Rest mode and inhibition mode facilities . 29
Annex K (normative) Ballasts incorporating an automatic testing function for
emergency lighting operation . 30
Annex L (informative) Compatibility between normal mains operation electronic
controlgear and battery-powered emergency operation controlgear . 33
Figure 1 – Suitable circuit for the measurement of lamp current and luminous flux . 15
Figure 2 – Rectifying effect test . 23
Figure 3 – Circuit to test whether a controlgear can withstand a leaking burner . 24
Figure 4 – Circuit to test whether a ballast can withstand rectification . 26
Figure L.1 – Timing diagram: changeover operation . 34
Figure L.2 – Supply voltage for the function test . 35
Table 1 – Voltage per cell to which the battery is discharged . 16
Table 2 – Relation between r.m.s. working voltage and maximum peak voltage . 26
Table K.1 – Relevant requirements of IEC 62034 . 30
– 4 – 61347-2-7 © IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LAMP CONTROLGEAR –
Part 2-7: Particular requirements for battery supplied electronic
controlgear for emergency lighting (self-contained)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the rel
...
IEC 61347-2-7 ®
Edition 3.1 2017-10
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery supplied electronic controlgear for
emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles particulières relatives aux appareillages électroniques
alimentés par batterie pour l’éclairage de secours (autonome)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.
Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
La recherche avancée permet de trouver des publications IEC
65 000 entrées terminologiques électrotechniques, en anglais
en utilisant différents critères (numéro de référence, texte,
et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les
publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées.
antérieures extraites des publications des CE 37, 77, 86 et
CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished
Restez informé sur les nouvelles publications IEC. Just Service Clients - webstore.iec.ch/csc
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 61347-2-7 ®
Edition 3.1 2017-10
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery supplied electronic controlgear for
emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles particulières relatives aux appareillages électroniques
alimentés par batterie pour l’éclairage de secours (autonome)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-4961-1
IEC 61347-2-7 ®
Edition 3.1 2017-10
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery supplied electronic controlgear for
emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles particulières relatives aux appareillages électroniques
alimentés par batterie pour l’éclairage de secours (autonome)
– 2 – IEC 61347-2-7:2011+AMD1:2017 CSV
© IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
INTRODUCTION to Amendment 1 . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 General requirements . 10
5 General notes on tests . 10
6 Classification . 11
7 Marking . 11
8 Protection against accidental contact with live parts . 13
9 Terminals . 13
10 Provisions for protective earthing . 13
11 Moisture resistance and insulation . 13
12 Electric strength . 13
13 Thermal endurance test for windings of controlgear . 13
14 Fault conditions . 13
15 Starting conditions . 13
16 Lamp current . 14
17 Supply current . 14
18 Maximum current in any lead (with cathode preheating) . 14
19 Lamp operating current waveforms . 14
20 Functional safety (EBLF, EOF ) . 15
X
21 Changeover operation . 17
22 Recharging device . 18
23 Protection against excessive discharge . 20
24 Indicator . 21
25 Remote control, rest mode, inhibition mode . 21
26 Temperature cycling test and endurance test . 22
27 Polarity reversal . 22
28 Fault conditions . 23
29 Construction . 23
30 Creepage distances and clearances . 23
31 Screws, current-carrying parts and connections . 23
32 Resistance to heat, fire and tracking . 23
33 Resistance to corrosion . 23
34 Abnormal lamp conditions . 23
35 Protection of associated components . 29
Annex A (normative) Test to establish whether a conductive part is a live part, which
may cause an electric shock . 31
Annex B (normative) Particular requirements for thermally protected lamp controlgear . 31
© IEC 2017
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating . 31
Annex D (normative) Requirements for carrying out the heating test of thermally
protected lamp controlgear . 31
Annex E (normative) Use of constant S other than 4 500 in t tests . 31
w
Annex F (normative) Draught-proof enclosure . 31
Annex G (normative) Explanation of the derivation of the values of pulse voltages . 32
Annex H (normative) Tests . 32
Annex I (normative) Batteries for emergency lighting luminaires . 32
Annex J (informative) Rest mode and inhibition mode facilities . 32
Annex K (normative) Ballasts Controlgear incorporating an automatic testing function
for emergency lighting operation . 33
Annex L (informative) Compatibility between normal mains operation electronic
controlgear and battery-powered emergency operation controlgear . 36
Bibliography . 39
Figure 1 – Suitable circuit for the measurement of lamp current and luminous flux . 16
Figure 2 – Circuit for testing rectifying effect test . 26
Figure 3 – Circuit to test whether a controlgear can withstand a leaking burner . 28
Figure 4 – Circuit to test whether a bal
...
IEC 61347-2-7 ®
Edition 3.2 2021-12
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery electric source for safety services
(ESSS) supplied electronic controlgear for emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles Exigences particulières relatives aux appareillages
électroniques alimentés par batteries source électrique de sécurité (ESSS)
pour l'éclairage de secours (autonome)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
sales@iec.ch.
IEC 61347-2-7 ®
Edition 3.2 2021-12
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery electric source for safety services
(ESSS) supplied electronic controlgear for emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles Exigences particulières relatives aux appareillages
électroniques alimentés par batteries source électrique de sécurité (ESSS)
pour l'éclairage de secours (autonome)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.99 ISBN 978-2-8322-4968-0
IEC 61347-2-7 ®
Edition 3.2 2021-12
CONSOLIDATED VERSION
REDLINE VERSION
VERSION REDLINE
colour
inside
Lamp controlgear –
Part 2-7: Particular requirements for battery electric source for safety services
(ESSS) supplied electronic controlgear for emergency lighting (self-contained)
Appareillages de lampes –
Partie 2-7: Règles Exigences particulières relatives aux appareillages
électroniques alimentés par batteries source électrique de sécurité (ESSS)
pour l'éclairage de secours (autonome)
– 2 – IEC 61347-2-7:2011+AMD1:2017
+AMD2:2021 CSV © IEC 2021
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
INTRODUCTION to Amendment 1 . 6
INTRODUCTION to Amendment 2 . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General requirements . 12
5 General notes on tests . 12
6 Classification . 12
7 Marking . 12
8 Protection against accidental contact with live parts . 15
9 Terminals . 15
10 Provisions for protective earthing . 15
11 Moisture resistance and insulation . 15
12 Electric strength . 15
13 Thermal endurance test for windings of ballasts controlgear . 15
14 Fault conditions Void . 15
15 Starting conditions . 15
16 Lamp current . 16
17 Supply current . 16
18 Maximum current in any lead (with cathode preheating) . 16
19 Lamp operating current waveforms . 16
20 Functional safety (EBLF, EOF ) . 17
X
21 Changeover operation . 21
22 Recharging device . 21
23 Protection against excessive discharge . 25
24 Indicator . 26
25 Remote control, rest mode, inhibition mode . 26
26 Temperature cycling test and endurance test . 28
27 Polarity reversal . 28
28 Fault conditions . 29
29 Construction . 29
30 Creepage distances and clearances . 29
31 Screws, current-carrying parts and connections . 29
32 Resistance to heat, fire and tracking . 29
33 Resistance to corrosion . 29
34 Abnormal lamp conditions . 30
35 Protection of associated components . 35
Annex A (normative) Test to establish whether a conductive part is a live part, which
may cause an electric shock . 37
+AMD2:2021 CSV © IEC 2021
Annex B (normative) Particular requirements for thermally protected lamp controlgear . 37
Annex C (normative) Particular requirements for electronic lamp controlgear with
means of protection against overheating . 37
Annex D (normative) Requirements for carrying out the heating test of thermally
protected lamp controlgear . 37
Annex E (normative) Use of constant S other than 4 500 in t tests . 37
w
Annex F (normative) Draught-proof enclosure . 37
Annex G (normative) Explanation of the derivation of the values of pulse voltages . 38
Annex H (normative) Tests . 38
Annex I (normative) Batteries ESSSs for emergency lighting luminaires . 38
Annex J (informative) Rest mode and inhibition mode facilities . 38
Annex K (normative) Ballasts Controlgear incorporating an automatic testing function
for emergency lighting operation . 39
Annex L (informative) Compatibility between normal mains operation electronic
controlgear and battery- electric source for safety services (ESSS) powered
emergency operation controlgear . 42
Annex M (informative) Example of battery manufacturer's declaration of design for a Li
battery . 45
Bibliography . 46
Figure 1 – Suitable circuit for the measurement of lamp current and luminous flux . 19
Figure 2 – Circuit for testing rectifying effect test . 32
Figure 3 – Circuit to test whether a controlgear can withstand a leaking burner . 34
Figure 4 – Circuit to test whether a ballast controlgear can withstand rectification . 35
Figure L.1 – Timing diagram: change
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.