EN 60034-12:1995
(Main)Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz
Specifies four standard designs of starting performance for three-phase motors, from 0.4 kW up to 630 kW for direct on-line or star-delta starting and rated on the basis of duty-type S-1 (maximum continuous rating). Also covers dual voltage motors in so far as the flux saturation level is the same for both voltages.
Drehende elektrische Maschinen - Teil 12: Anlaufverhalten von Drehstrommotoren mit Käfigläufer, ausgenommen polumschaltbare Maschinen, für Spannungen bis einschließlich 690 V, 50 Hz
Machines électriques tournantes - Partie 12: Caractéristiques de démarrage des moteurs triphasés à induction à cage à une seule vitesse pour des tensions d'alimentation inférieures ou égales à 690 V, 50 Hz
Spécifie quatre conceptions normales des caractéristiques de démarrage de moteurs triphasés de 0,4 kW à 630 kW pour démarrage direct ou en étoile-triangle dimensionnés pour le service type S-1 (service maximal continu). S'applique également aux moteurs bi-tension dans la mesure où le niveau de saturation du flux est le même pour les deux tensions.
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz (IEC 60034-12:1980 + A1:1992 (Modified))
General Information
- Status
- Withdrawn
- Publication Date
- 01-Aug-1995
- Withdrawal Date
- 01-Feb-1996
- Technical Committee
- CLC/TC 2 - Rotating machinery
- Drafting Committee
- IEC/TC 2 - IEC_TC_2
- Parallel Committee
- IEC/TC 2 - IEC_TC_2
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-May-2005
- Completion Date
- 01-May-2005
Relations
- Effective Date
- 28-Jan-2023
- Effective Date
- 29-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
UL Solutions
Global safety science company with testing, inspection and certification.
CEPREI Certification Center (Guangzhou Saibao)
Pioneer of third-party certification, subsidiary of Electronic Fifth Research Institute.
CESI Beijing Certification (Saisi)
Subsidiary of China Electronics Standardization Institute (CESI), established 1963.
Sponsored listings
Frequently Asked Questions
EN 60034-12:1995 is a standard published by CLC. Its full title is "Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V, 50 Hz". This standard covers: Specifies four standard designs of starting performance for three-phase motors, from 0.4 kW up to 630 kW for direct on-line or star-delta starting and rated on the basis of duty-type S-1 (maximum continuous rating). Also covers dual voltage motors in so far as the flux saturation level is the same for both voltages.
Specifies four standard designs of starting performance for three-phase motors, from 0.4 kW up to 630 kW for direct on-line or star-delta starting and rated on the basis of duty-type S-1 (maximum continuous rating). Also covers dual voltage motors in so far as the flux saturation level is the same for both voltages.
EN 60034-12:1995 is classified under the following ICS (International Classification for Standards) categories: 29.160.30 - Motors. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60034-12:1995 has the following relationships with other standards: It is inter standard links to EN 60034-12:2002, EN 60034-12:1995/A2:1995. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 60034-12:1995 is associated with the following European legislation: EU Directives/Regulations: 2006/95/EC, 73/23/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 60034-12:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-1999
Rotating electrical machines - Part 12: Starting performance of single-speed three-
phase cage induction motors for voltages up to and including 690 V, 50 Hz (IEC
60034-12:1980 + A1:1992 (Modified))
Rotating electrical machines -- Part 12: Starting performance of single-speed three-
phase cage induction motors for voltages up to and including 690 V, 50 Hz
Drehende elektrische Maschinen -- Teil 12: Anlaufverhalten von Drehstrommotoren mit
Käfigläufer, ausgenommen polumschaltbare Maschinen, für Spannungen bis
einschließlich 690 V, 50 Hz
Machines électriques tournantes -- Partie 12: Caractéristiques de démarrage des
moteurs triphasés à induction à cage à une seule vitesse pour des tensions
d'alimentation inférieures ou égales à 690 V, 50 Hz
Ta slovenski standard je istoveten z: EN 60034-12:1995
ICS:
29.160.30 Motorji Motors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...