EN 50290-2-37:2016

SLOVENSKI STANDARD
01-julij-2016
.RPXQLNDFLMVNLNDEOLGHO6NXSQDSUDYLODQDþUWRYDQMDLQNRQVWUXNFLMD
3ROLHWLOHQVNDL]RODFLMD]DNRDNVLDOQHNDEOH
Communication cables - Part 2-37: Common design rules and construction -
Polyethylene insulation for coaxial cables
Kommunikationskabel - Teil 2-37: Gemeinsame Regeln für Entwicklung und Konstruktion
- Polyethylen-Isoliermischungen für Koaxialkabel
Câbles de communication - Partie 2-37: Règles de conception communes et construction
- Polyéthylène pour enveloppes isolantes pour câbles coaxiaux
Ta slovenski standard je istoveten z: EN 50290-2-37:2016
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50290-2-37
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2016
ICS 29.035.20; 33.120.10
English Version
Communication cables - Part 2-37: Common design rules and
construction - Polyethylene insulation for coaxial cables
Câbles de communication - Partie 2-37: Règles de Kommunikationskabel - Teil 2-37: Gemeinsame Regeln für
conception communes et construction - Polyéthylène pour Entwicklung und Konstruktion - Polyethylen-
enveloppes isolantes pour câbles coaxiaux Isoliermischungen für Koaxialkabel
This European Standard was approved by CENELEC on 2016-03-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50290-2-37:2016 E
Contents
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Raw material requirements . 5
4 Cable test requirements . 5
5 Health, safety and environmental regulations . 5
Bibliography . 10

European foreword
This document (EN 50290-2-37:2016) has been prepared by CLC/TC 46X “Communication cables”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2017-03-14
implemented at national level by publication
of an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2019-03-14
conflicting with this document have to
be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association.
1 Scope
This Part 2-37 of EN 50290 gives specific requirements for Polyethylene (PE) compounds to be used for the
insulation of coaxial cables. The standard includes Low Density (LD), Medium Density (MD) and High Density
(HD) Polyethylene compounds.
It is to be read in conjunction with EN 50290-2-20, EN 50117 and other applicable product standards.
Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient
data to demonstrate compliance and warrant that the material is suitable for the specified application.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
EN 50289-3-9, Communication cables - Specifications for test methods - Part 3-9: Mechanical test methods -
Bending tests
EN 50289-3-17, Communication cables - Specifications for test methods - Part 3-17: Mechanical test
methods - Adhesion of dielectric and sheath
EN 60811-401, Electric and optical fibre cables - Test methods for non-metallic materials - Part 401:
Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401)
EN 60811-501, Electric and optical fibre cables - Test methods for non-metallic materials - Part 501:
Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
(IEC 60811-501)
EN 60811-502, Electric and optical fibre cables - Test methods for non-metallic materials - Part 502:
Mechanical tests - Shrinkage test for insulations (IEC 60811-502)
EN 60754-2, Test on gases evolved during combustion of materials from cables - Part 2: Determination of
acidity (by pH measurement) and conductivity (IEC 60745-2)
EN 60216 (all parts), Electrical insulating materials – Thermal endurance properties (IEC 60216)
EN ISO 527 (all parts), Plastics – Determination of tensil
...