Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds

This European Standard gives specific requirements for PP compounds to be used for multi-element metallic data cables for indoor application. Type 1 is typically a copolymer with better low temperature properties. Type 2 is typically a homopolymer with superior hardness giving better crush resistance. Using compound and type test data as outlined in this standard, the compound supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

Kommunikationskabel - Teil 2-25: Gemeinsame Regeln für Entwicklung und Konstruktion - Polypropylen-Isoliermischungen

Câbles de communication - Partie 2-25: Règles de conception communes et construction - Polypropylène pour enveloppes isolantes

Komunikacijski kabli - 2-25. del: Skupna pravila načrtovanja in konstrukcija - Polipropilenske izolacijske zmesi

Ta evropski standard določa posebne zahteve za zmesi PP, ki se uporabljajo za večelementne kovinske podatkovne kable za notranjo uporabo. Tip 1 je običajno kopolimer z boljšimi lastnostmi pri nizkih temperaturah. Tip 2 je običajno homopolimer z boljšo trdoto, kar mu zagotavlja boljšo odpornost proti drobljenju. Z uporabo podatkov o zmesi in tipskem preskušanju, kot je opisano v tem standardu, bo imel dobavitelj zmesi dovolj podatkov, da dokaže skladnost in jamči, da je material ustrezen za opredeljeno uporabo.

General Information

Status
Published
Publication Date
31-Oct-2013
Withdrawal Date
15-Sep-2016
Parallel Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-May-2021

Relations

Buy Standard

Standard
EN 50290-2-25:2014
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2014
.RPXQLNDFLMVNLNDEOLGHO6NXSQDSUDYLODQDþUWRYDQMDLQNRQVWUXNFLMD
3ROLSURSLOHQVNHL]RODFLMVNH]PHVL
Communication cables - Part 2-25: Common design rules and construction -
Polypropylene insulation compounds
Kommunikationskabel -- Teil 2-25: Gemeinsame Regeln für Entwicklung und
Konstruktion - Polypropylen-Isoliermischungen
Câbles de communication - Partie 2-25: Règles de conception communes et construction
- Polypropylène pour enveloppes isolantes
Ta slovenski standard je istoveten z: EN 50290-2-25:2013
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 50290-2-25
NORME EUROPÉENNE
November 2013
EUROPÄISCHE NORM
ICS 29.035.20; 33.120.10 Supersedes EN 50290-2-25:2002

English version
Communication cables -
Part 2-25: Common design rules and construction -
Polypropylene insulation compounds

Câbles de communication -  Kommunikationskabel -
Partie 2-25: Règles de conception Teil 2-25: Gemeinsame Regeln für
communes et construction - Entwicklung und Konstruktion -
Polypropylène pour enveloppes isolantes Polypropylen-Isoliermischungen

This European Standard was approved by CENELEC on 2013-09-16. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50290-2-25:2013 E
Contents
Foreword . 3
1 Scope . 5
2 Normative references . 5
3 Compound test requirements . 6
4 Cable test requirements . 6
5 Health, Safety and Environmental Regulations . 6
Bibliography . 9

- 3 - EN 50290-2-25:2013
Foreword
This document (EN 50290-2-25:2013) was prepared by CLC/TC 46X "Communication cables".
The following dates are fixed:
• latest date by which this document has
(dop) 2014-09-16
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national
(dow) 2016-09-16
standards conflicting with this
document have to be withdrawn
This document supersedes EN 50290-2-25:2002.
− The document has been entirely restructured.
− The main change is the introduction of the new Table 1 for the test to be performed on granules.
This document should be read in conjunction with EN 50290-2-20, the product standard EN 50288 (all parts) and
other applicable product standards.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use
within Certain Voltage Limits (LVD - 2006/95/EC).
EN 50290-2, Communication cables, is divided into the following sub-parts:
− Part 2-1: Common design rules and construction;
− Part 2-2: Common design rules and construction  Polyethylene insulation for multi element metallic data
cables for indoor application [currently at Enquiry stage];
− Part 2-3: Common design rules and construction  Polyethylene insulation for coaxial cables [currently at
Enquiry stage];
− Part 2-4: Common design rules and construction  Polypropylene insulation for coaxial cables [currently at
Enquiry stage];
− Part 2-20: Common design rules and construction  General;
− Part 2-21: Common design rules and construction  PVC insulation compounds;
− Part 2-22: Common design rules and construction  PVC sheathing compounds;
− Part 2-23: Common design rules and construction  PE insulation;
− Part 2-24: Common design rules and construction  PE sheathing;

− Part 2-25: Common design rules and construction  Polypropylene insulation for compounds [the present
document];
 Halogen free flame retardant insulation compounds;
− Part 2-26: Common design rules and construction
− Part 2-27: Common design rules and construction  Halogen free flame retardant thermoplastic sheathing
compounds;
 Filling compounds for filled cables;
− Part 2-28: Common design rules and construction
− Part 2-29: Common design rules and construction  Cross-linked PE insulation compounds;
− Part 2-30: Common design rules and construction  Poly(tetrafluoroethylene-hexafluoropropylene) (FEP)
insulation and sheathing;
− Part 2-32: Common design rules and construction  Halogen free insulation compounds for flame retardant
and fire resistant cables [currently at Enquiry stage].
_________
- 5 - EN 50290-2-25:2013
1 Scope
This European Standard gives specific requirements for PP compounds to be used for multi-element metallic
data cables for indoor application. Type 1 is typically a copolymer with better low temperature properties. Type 2
is typically a homopolymer with superior hardness giving better crush resistance.
Using compound and type test data as outlined in this standard, the compound supplier will have sufficient data
to demonstrate compliance and warrant that the material is suitable for the specified application.
2 Normative references
The following doc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.