Aerial devices with insulating boom used for live working exceeding 1 kV a.c.

Applies to aerial devices (mobile elevating work platforms (MEWP)), with or without the possibility of an additional jib, as a minimum with an insulating upper boom (extending structure) used for live working on the rated voltage, which is between 1 kW r.m.s. and 800 kV r.m.s., at power frequency.

Equipements élévateurs à bras isolants utilisés pour les travaux sous tension au-dessus de 1 kV en courant alternatif

S'applique aux engins élévateurs de personnel (plateforme élévatrice mobile de personnel (PEMP)), avec ou sans possibilité d'ajout de mâts de charge, équipés au minimum d'un bras supérieur isolant (partie mobile), utilisés pour les travaux sous tension sur des réseaux de tension assignée comprise entre 1 kV efficace et 800 kV efficace à fréquence industrielle.

Zračne naprave z izolacijsko ograjo za delo pod napetostjo nad 1 kV izmenično (IEC 61057:1991, spremenjen)

General Information

Status
Withdrawn
Publication Date
02-Nov-1993
Withdrawal Date
31-Jul-1995
Technical Committee
CLC/TC 78 - Equipment and tools for live working
Drafting Committee
IEC/TC 78 - IEC_TC_78
Parallel Committee
IEC/TC 78 - IEC_TC_78
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
24-Jul-2020
Completion Date
24-Jul-2020
Ref Project
SIST EN 61057:2001 - Aerial devices with insulating boom used for live working exceeding 1 kV a.c.

Relations

Replaced By
EN 61057:2017 - Live working - Insulating aerial devices for mounting on a chassis
Effective Date
07-Jun-2022

Frequently Asked Questions

EN 61057:1993 is a standard published by CLC. Its full title is "Aerial devices with insulating boom used for live working exceeding 1 kV a.c.". This standard covers: Applies to aerial devices (mobile elevating work platforms (MEWP)), with or without the possibility of an additional jib, as a minimum with an insulating upper boom (extending structure) used for live working on the rated voltage, which is between 1 kW r.m.s. and 800 kV r.m.s., at power frequency.

Applies to aerial devices (mobile elevating work platforms (MEWP)), with or without the possibility of an additional jib, as a minimum with an insulating upper boom (extending structure) used for live working on the rated voltage, which is between 1 kW r.m.s. and 800 kV r.m.s., at power frequency.

EN 61057:1993 has the following relationships with other standards: It is inter standard links to EN 61057:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 61057:1993 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2001
=UDþQHQDSUDYH]L]RODFLMVNRRJUDMR]DGHORSRGQDSHWRVWMRQDGN9L]PHQLþQR
,(&VSUHPHQMHQ
Aerial devices with insulating boom used for live working exceeding 1 kV a.c.
Equipements élévateurs à bras isolants utilisés pour les travaux sous tension au-dessus
de 1 kV en courant alternatif
Ta slovenski standard je istoveten z: EN 61057:1993
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
53.020.99 Druga dvigalna oprema Other lifting equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...