EN IEC 61076-2-115:2023

SLOVENSKI STANDARD
01-september-2023
Konektorji za električno in elektronsko opremo - Zahteve za izdelek - 2-115. del:
Okrogli konektorji - Podrobna specifikacija za 12-polne konektorje z naznačenim
tokom 2A in z zaskočnim zaklepanjem IP65/IP67 s kovinskim ohišjem (IEC 61076-2
-115:2023)
Connectors for electrical and electronic equipment - Product requirements - Part 2-115:
Circular connectors - Detail specification for 12-pole connectors with 2 A rated current
and push-pull locking IP65/IP67 with metal housing (IEC 61076-2-115:2023)
Steckverbinder für elektrische und elektronische Einrichtungen - Produktanforderungen -
Teil 2-115: Rundsteckverbinder - Einzelspezifikation für 12-polige Steckverbinder mit 2
A Nennstrom und Push-Pull-Verrieglung IP65/IP67 Metallgehäuse (IEC 61076-2-
115:2023)
Connecteurs pour équipements électriques et électroniques - Exigences de produit -
Partie 2-115: Connecteurs circulaires - Spécification particulière relative aux connecteurs
à 12 pôles avec un courant assigné de 2 A et un mécanisme de verrouillage de type
pousser-tirer IP65/IP67, logés dans un boîtier métallique (IEC 61076-2-115:2023)
Ta slovenski standard je istoveten z: EN IEC 61076-2-115:2023
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 61076-2-115

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2023
ICS 31.220.10
English Version
Connectors for electrical and electronic equipment - Product
requirements - Part 2-115: Circular connectors - Detail
specification for 12-pole shielded connectors with 2 A rated
current and IP65/IP67 metal housing with push-pull locking
(IEC 61076-2-115:2023)
Connecteurs pour équipements électriques et électroniques Steckverbinder für elektrische und elektronische
- Exigences de produit - Partie 2-115: Connecteurs Einrichtungen - Produktanforderungen - Teil 2-115:
circulaires - Spécification particulière relative aux Rundsteckverbinder - Einzelspezifikation für 12-polige
connecteurs blindés à 12 pôles avec un courant assigné de Steckverbinder mit 2 A Nennstrom und Push-Pull-
2 A et un boîtier métallique IP65/IP67 équipé d'un Verrieglung IP65/IP67 Metallgehäuse
mécanisme de verrouillage de type pousser-tirer (IEC 61076-2-115:2023)
(IEC 61076-2-115:2023)
This European Standard was approved by CENELEC on 2023-06-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61076-2-115:2023 E

European foreword
The text of document 48B/2948/CDV, future edition 1 of IEC 61076-2-115, prepared by SC 48B
"Electrical connectors" of IEC/TC 48 "Electrical connectors and mechanical structures for electrical
and electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61076-2-115:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-03-27
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-06-27
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61076-2-115:2023 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-581 - International Electrotechnical Vocabulary - Part - -
581: Electromechanical components for
electronic equipment
IEC 60068-1 - Environmental testing - Part 1: General and EN 60068-1 -
guidance
IEC 60068-2-60 - Environmental testing - Part 2-60: Tests - Test EN 60068-2-60 -
Ke: Flowing mixed gas corrosion test
IEC 60228 - Conductors of insulated cables EN 60228 -
IEC 60352-2 - Solderless connections - Part 2: Crimped EN 60352-2 -
connections - General requirements, test
methods and practical guidance
IEC 60352-3 - Solderless connections - Part 3: Accessible EN IEC 60352-3 -
insulation displacement (ID) connections -
General requirements, test methods and
practical guidance
IEC 60352-4 - Solderless connections - Part 4: Non- EN IEC 60352-4 -
accessible insulation displacement (ID)
connections - General requirements, test
methods and practical guidance
IEC 60352-5 - Solderless connections - Part 5: Press-in EN IEC 60352-5 -
connections - General requirements, test
methods and practical guidance
IEC 60352-6 - Solderless connections - Part 6: Insulation EN IEC 60352-6 -
piercing connections - General requirements,
test methods and practical guidance
IEC 60352-7 - Solderless connections - Part 7: Spring clamp EN IEC 60352-7 -
connections - General requirements, test
methods and practical guidance
IEC 60512-1 - Connectors for electrical and electronic EN IEC 60512-1 -
equipment - Tests and measurements - Part 1:
Generic specification
Publication Year Title EN/HD Year
IEC 60512-1-1 - Connectors for electronic equipment - Tests EN 60512-1-1 -
and measurements - Part 1-1: General
examination - Test 1a: Visual examination
IEC 60512-1-2 - Connectors for electronic equipment - Tests EN 60512-1-2 -
and measurements - Part 1-2: General
examination - Test 1b: Examination of
dimension and mass
IEC 60512-2-1 - Connectors for electronic equipment - Tests EN 60512-2-1 -
and measurements - Part 2-1: Electrical
continuity and contact resistance tests - Test
2a: Contact resistance - Millivolt level method
IEC 60512-2-2 - Connectors for electronic equipment - Tests EN 60512-2-2 -
and measurements - Part 2-2: Electrical
continuity and contact resistance tests - Test
2b: Contact resistance - Specified test current
method
IEC 60512-2-5 - Connectors for electronic equipment - Tests EN 60512-2-5 -
and measurements - Part 2-5: Electrical
continuity and contact resistance tests - Test
2e: Contact disturbance
IEC 60512-2-6 - Connectors for electronic equipment - Tests EN 60512-2-6 -
and measurements - Part 2-6: Electrical
continuity and contact resistance tests - Test
2f: Housing (shell) electrical continuity
IEC 60512-3-1 - Connectors for electronic equipment - Tests EN 60512-3-1 -
and measurements - Part 3-1: Insulation tests -
Test 3a: Insulation resistance
IEC 60512-4-1 - Connectors for electronic equipment - Tests EN 60512-4-1 -
and measurements - Part 4-1: Voltage stress
tests - Test 4a: Voltage proof
IEC 60512-5-2 - Connectors for electronic equipment - Tests EN 60512-5-2 -
and measurements - Part 5-2: Current-carrying
capacity tests - Test 5b: Current-temperature
derating
IEC 60512-6-3 - Connectors for electronic equipment - Tests EN 60512-6-3 -
and measurements - Part 6-3: Dynamic stress
tests - Test 6c: Shock
IEC 60512-6-4 - Connectors for electronic equipment - Tests EN 60512-6-4 -
and measurements - Part 6-4: Dynamic stress
tests - Test 6d: Vibration (sinusoidal)
IEC 60512-7-1 - Connectors for electronic equipment - Tests EN 60512-7-1 -
and measurements - Part 7-1: Impact tests
(free connectors) - Test 7a: Free fall (repeated)
IEC 60512-9-1 - Connectors for electronic equipment - Tests EN 60512-9-1 -
and measurements - Part 9-1: Endurance tests
- Test 9a: Mechanical operation
IEC 60512-9-2 - Connectors for electronic equipment - Tests EN 60512-9-2 -
and measurements - Part 9-2: Endurance tests
- Test 9b: Electrical load and temperature
Publication Year Title EN/HD Year
IEC 60512-11-1 - Connectors for electrical and electronic EN IEC 60512-11-1 -
equipment - Tests and measurements - Part
11-1: Climatic tests - Test 11a - Climatic
sequence
IEC 60512-11-3 - Connectors for electronic equipment - Tests EN 60512-11-3 -
and measurements - Part 11-3: Climatic tests -
Test 11c: Damp heat, steady state
IEC 60512-11-4 - Connectors for electronic equipment - Tests EN 60512-11-4 -
and measurements - Part 11-4: Climatic tests -
Test 11d: Rapid change of temperature
IEC 60512-11-6 - Connectors for electronic equipment - Tests EN 60512-11-6 -
and measurements - Part 11-6: Climatic tests -
Test 11f: Corrosion, salt mist
IEC 60512-11-7 - Connectors for electronic equipment - Tests EN 60512-11-7 -
and measurements - Part 11-7: Climatic tests -
Test 11g: Flowing mixed gas corrosion test
IEC 60512-11-9 - Connectors for electronic equipment - Tests EN 60512-11-9 -
and measurements - Part 11-9: Climatic tests -
Test 11i: Dry heat
IEC 60512-11-10 - Connectors for electronic equipment - Tests EN 60512-11-10 -
and measurements - Part 11-10: Climatic tests
- Test 11j: Cold
IEC 60512-11-11 - Connectors for electronic equipment - Tests EN 60512-11-11 -
and measurements - Part 11-11: Climatic tests
- Test 11k: Low air pressure
IEC 60512-11-12 - Connectors for electronic equipment - Tests EN 60512-11-12 -
and measurements - Part 11-12: Climatic tests
- Test 11m: Damp heat, cyclic
IEC 60512-13-1 - Connectors for electronic equipment - Tests EN 60512-13-1 -
and measurements - Part 13-1: Mechanical
operation tests - Test 13a: Engaging and
separating forces
IEC 60512-13-5 - Connectors for electronic equipment - Tests EN 60512-13-5 -
and measurements - Part 13-5: Mechanical
operation tests - Test 13e: Polarizing and
keying method
IEC 60512-15-1 - Connectors for electronic equipment - Tests EN 60512-15-1 -
and measurements - Part 15-1: Connector
tests (mechanical) - Test 15a: Contact
retention in insert
IEC 60512-15-6 - Connectors for electronic equipment - Tests EN 60512-15-6 -
and measurements - Part 15-6: Connector
tests (mechanical) - Test 15f: Effectiveness of
connector coupling devices
IEC 60512-16-5 - Connectors for electronic equipment - Tests EN 60512-16-5 -
and measurements - Part 16-5: Mechanical
tests on contacts and terminations - Test 16e:
Gauge retention force (resilient contacts)
IEC 60512-20-3 - Connectors for electronic equipment - Tests EN 60512-20-3 -
and measurements - Part 20-3: Fire hazard
tests - Test 20c: Flammability, glow-wire
Publication Year Title EN/HD Year
IEC 60529 1989 Degrees of protection provided by enclosures EN 60529 1991
(IP Code)
- - + corrigendum May 1993
+ A1 1999 + A1 2000
+ A2 2013 + A2 2013
IEC 60664-1 2020 Insulation coordination for equipment within EN IEC 60664-1 2020
low-voltage supply systems - Part 1: Principles,
requirements and tests
IEC 60695-2-11 2021 Fire hazard testing - Part 2-11: Glowing/hot- EN IEC 60695-2-11 2021
wire based test methods - Glow-wire
flammability test method for end products
(GWEPT)
IEC 60999-1 - Connecting devices - Electrical copper EN 60999-1 -
conductors - Safety requirements for screw-
type and screwless-type clamping units - Part
1: General requirements and particular
requirements for clamping units for conductors
from 0,2 mm2 up to 35 mm2 (included)
IEC 61076-1 2006 Connectors for electronic equipment - Product EN 61076-1 2006
requirements - Part 1: Generic specification
+ A1 2019 + A1 2019
IEC 61076-2 - Connectors for electronic equipment - Product EN 61076-2 -
requirements - Part 2: Sectional specification
for circular connectors
IEC 61984 2008 Connectors - Safety requirements and tests EN 61984 2009
IEC 62430 2019 Environmentally conscious design (ECD) - EN IEC 62430 2019
Principles, requirements and guidance
IEC Guide 109 - Environmental aspects - Inclusion in - -
electrotechnical product standards
ISO 6508-1 - Metallic materials - Rockwell hardness test - EN ISO 6508-1 -
Part 1: Test method
ISO 11469 - Plastics - Generic identification and marking of EN ISO 11469 -
plastics products
ISO 21920-1 2021 Geometrical product specifications (GPS) - EN ISO 21920-1 2022
Surface texture: Profile - Part 1: Indication
...