Uninterruptible power systems (UPS) - Part 2: EMC requirements

This EMC Standard applies to single UPS units or UPS systems comprising a number of interconnected UPS and associated control/switchgear forming a single power system, intended to be installed in any operator accessible area or in separated electrical locations, connected to either industrial or public low voltage supply networks. This product EMC Standard will take precedence over all aspects of the Generic Standards and no additional testing is necessary. The requirements have been selected so as to ensure an adequate level of electromagnetic compatibility (EMC) for UPS at public and industrial locations. These levels cannot however cover extreme cases which may occur in any location, but with extremely low probability. It takes account of the differing test conditions necessary to encompass the range of physical sizes and power ratings of UPS. A UPS unit or system shall meet the relevant requirements of this Standard as a stand-alone product. EMC phenomena produced by any customers' load connected to the output of the UPS equipment shall not be taken into account. Special installation environments are not covered nor are fault conditions of UPS taken into account. This Standard does not cover DC supplied electronic ballasts (IEC 924 and IEC 925) or UPS based on rotating machines.

Unterbrechungsfreie Stromversorgungssysteme(USV) - Teil 2: EMV-Anforderungen

Alimentations sans interruption (ASI) - Partie 2: Prescriptions pour la compatibilité électromagnétique (CEM)

Uninterruptible Power Systems (UPS) - Part 2: EMC requirements

General Information

Status
Withdrawn
Publication Date
17-Sep-1995
Withdrawal Date
28-Feb-1999
Technical Committee
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2008
Completion Date
01-Oct-2008

Relations

Buy Standard

Standard
EN 50091-2:1997
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-1997
Uninterruptible Power Systems (UPS) - Part 2: EMC requirements
Uninterruptible power systems (UPS) -- Part 2: EMC requirements
Unterbrechungsfreie Stromversorgungssysteme(USV) -- Teil 2: EMV-Anforderungen
Alimentations sans interruption (ASI) -- Partie 2: Prescriptions pour la compatibilité
électromagnétique (CEM)
Ta slovenski standard je istoveten z: EN 50091-2:1995
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.