EN 62040-2:2006

SLOVENSKI SIST EN 62040-2:2006

STANDARD
junij 2006
Sistemi z neprekinjanim napajanjem - 2. del: Zahteve za elektromagnetno
]GUXåOMLYRVW(0&,(&
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC)
requirements (IEC 62040-2:2005)
ICS 5HIHUHQþQDãWHYLOND
29.200; 33.100.01
! "#$%!&!%’()*#+’
EUROPEAN STANDARD
EN 62040-2
NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM
ICS 17.220; 29.200 Supersedes EN 50091-2:1995

English version
Uninterruptible power systems (UPS)
Part 2: Electromagnetic compatibility (EMC) requirements
(IEC 62040-2:2005)
Alimentations sans interruption (ASI) Unterbrechungsfreie
Partie 2: Exigences pour la compatibilité Stromversorgungssysteme (USV)
électromagnétique (CEM) Teil 2: Anforderungen an die
(CEI 62040-2:2005) elektromagnetische Verträglichkeit (EMV)
(IEC 62040-2:2005)
This European Standard was approved by CENELEC on 2005-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62040-2:2006 E
Foreword
The text of document 22H/74A/FDIS, future edition 2 of IEC 62040-2, prepared by SC 22H,
Uninterruptible Power Systems (UPS), of IEC TC 22, Power electronic systems and equipment, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62040-2 on
2005-10-01.
This European Standard supersedes EN 50091-2:1995 + corrigendum January 1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-10-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-10-01
This European Standard was prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and supports the essential requirements of
Directive 89/336/EEC (see Annex ZZ).
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 62040-2:2005 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62040-2:2006
Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives

This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers all
relevant essentiel requirements as given in the EC Directive 89/336/EEC.

Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directive concerned.

WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
NORME CEI
INTERNATIONALE
IEC
62040-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2005-10
Alimentations sans interruption (ASI) –
Partie 2:
Exigences pour la compatibilité
électromagnétique (CEM)
Uninterruptible power systems (UPS) –
Part 2:
Electromagnetic compatibility (EMC)
requirements
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
W
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

62040-2  IEC:2005 – 3 –
CONTENTS
FOREWORD.7

1 Scope.11
2 Normative references.13
3 Terms and definitions .15
4 Environment .15
5 UPS Categories .15
5.1 UPS of category C1 .15
5.2 UPS of category C2 .17
5.3 UPS of category C3 .17
5.4 UPS of category C4 .17
5.5 Categories and environment .17
6 Emission.19
6.1 General requirements .19
6.2 General measurement conditions.19
6.3 Conducted emissions.21
6.4 Radiated emissions .25
7 Immunity.27
7.1 General requirements and performance criteria.27
7.2 Basic immunity requirements – High-frequency disturbances.29
7.3 Immunity to low-frequency signals.33
7.4 Immunity to power-frequency magnetic field.33
7.5 Immunity to voltage dips, short interruptions and voltage variations .33

Annex A (normative) Electromagnetic emission – Test methods.35
Annex B (informative) Electromagnetic emission limits and measurement methods of
magnetic field – H field.65
Annex C (informative) Electromagnetic emission – Limits of signal ports.69
Annex D (normative) Electromagnetic immunity – Test methods .71
Annex E (informative) User installation testing.77

Figure 1 – Examples of ports.15
Figure A.1 – Circuit for disturbance voltage measurements on mains supply or UPS
output .51
Figure A.2 – Minimum alternative test site .51
Figure A.3 – Set-up for measurement of conducted emission for table-top units.53
Figure A.4 – Test set-up for floor-standing units .53
Figure A.5 – Test configuration for table-top equipment (conducted emission
measurement).55
Figure A.6 – Test configuration for table-top equipment (conducted emission
measurement) – Plan view .57
Figure A.7 – Alternative test configuration for table-top equipment (conducted emission
measurement) – Plan view .57

62040-2  IEC:2005 – 5 –
Figure A.8 – Test configuration for floor-standing equipment (conducted emission
measurement).59
Figure A.9 – Test configuration for table-top equipment (radiated emission requirement) .61
Figure A.10 – Test configuration for floor-standing equipment (radiated emission
measurement).63
Figure B.1 – Test set-up for measuring radiated disturbances.65
Figure D.2 – Phase unbalance.75

Table 1 – Limits of mains terminal interference voltage frequency range 0,15 MHz to
30 MHz for category C1 UPS and category C2 UPS equipment.23
Table 2 – Limits of mains terminal interference voltage frequency range 0,15 MHz to
30 MHz for Category C3 UPS equipment .23
Table 3 – Limits of radiated emission in the frequency range 30 MHz to 1 000 MHz .25
Table 4 – Performance criteria for immunity tests .27
Table 5 – Minimum immunity requirements for UPS intended for UPS of category C1 .29
Table 6 – Minimum immunity requirements for UPS of category C2 and C3.31
Table B.1 – UPS which has a rated output current less than, or equal to, 16 A .67
Table B.2 – UPS which has a rated output current greater than 16A.67
Table C.1 – Limits of signal ports .69

62040-2  IEC:2005 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
–––––––––––
UNINTERRUPTIBLE POWER SYSTEMS (UPS) –

Part 2: Electromagnetic compatibility (EMC) requirements

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no
...