EN 61000-4-4:2004
(Main)Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of EN 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines: - test voltage waveform; - range of test levels; - test equipment; - verification procedures of test equipment; - test set-up; - test procedure. The standard gives specifications for laboratory and post-installation tests. This second edition cancels and replaces the first edition published in 1995 and its amendments 1 (2000) and 2 (2001) and constitutes a technical revision.
Elektromagnetische Verträglichkeit (EMV) - Teil 4-4: Prüf- und Messverfahren - Prüfung der Störfestigkeit gegen schnelle transiente elektrische Störgrößen/Burst
Compatibilité électromagnétique (CEM) - Partie 4-4: Techniques d'essai et de mesure - Essais d'immunité aux transitoires électriques rapides en salves
Etablit une référence commune et reproductible dans le but d'évaluer l'immunité des matériels électriques et électroniques, quand ils sont soumis aux transitoires électriques rapides en salves sur les accès d'alimentation, de signal, de commande et de terre. La méthode d'essai documentée dans cette partie de la EN 61000-4 décrit une méthode cohérente dans le but d'évaluer l'immunité d'un matériel ou système vis-à-vis d'un phénomène défini. Cette norme définit: - la forme d'onde de l'essai en tension; - la gamme des niveaux d'essais; - le matériel d'essai; - les procédures de vérification du matériel d'essai; - l'installation d'essai; - la procédure d'essai. Cette norme donne des spécifications pour les essais menés en laboratoire et les essais in situ réalisés sur le matériel dans l'installation finale. Cette deuxième édition annule et remplace la première édition, parue en 1995, et ses amendements 1 (2000) et 2 (2001). Cette deuxième édition constitue une révision technique. -
Elektromagnetna združljivost (EMC) – 4-4. del: Preskusne in merilne tehnike – Preskus odpornosti proti hitrim električnim prehodnim pojavom/razpoku (IEC 61000-4- 4:2004)
General Information
- Status
- Withdrawn
- Publication Date
- 08-Dec-2004
- Withdrawal Date
- 30-Sep-2007
- Technical Committee
- CLC/TC 210 - Electromagnetic Compatibility (EMC)
- Drafting Committee
- IEC/SC 77B - IEC_SC_77B
- Parallel Committee
- IEC/SC 77B - IEC_SC_77B
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Jun-2015
- Completion Date
- 04-Jun-2015
Relations
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
- Effective Date
- 28-Jan-2023
- Effective Date
- 29-Jan-2023
Frequently Asked Questions
EN 61000-4-4:2004 is a standard published by CLC. Its full title is "Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test". This standard covers: Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of EN 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines: - test voltage waveform; - range of test levels; - test equipment; - verification procedures of test equipment; - test set-up; - test procedure. The standard gives specifications for laboratory and post-installation tests. This second edition cancels and replaces the first edition published in 1995 and its amendments 1 (2000) and 2 (2001) and constitutes a technical revision.
Establishes a common and reproducible reference for evaluating the immunity of electrical and electronic equipment when subjected to electrical fast transient/bursts on supply, signal, control and earth ports. The test method documented in this part of EN 61000-4 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. The standard defines: - test voltage waveform; - range of test levels; - test equipment; - verification procedures of test equipment; - test set-up; - test procedure. The standard gives specifications for laboratory and post-installation tests. This second edition cancels and replaces the first edition published in 1995 and its amendments 1 (2000) and 2 (2001) and constitutes a technical revision.
EN 61000-4-4:2004 is classified under the following ICS (International Classification for Standards) categories: 33.100.20 - Immunity. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 61000-4-4:2004 has the following relationships with other standards: It is inter standard links to EN 61000-4-4:1995, EN 61000-4-4:1995/A2:2001, EN 61000-4-4:1995/A1:2001, EN 61000-4-4:2012, EN 61000-4-4:2004/A1:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 61000-4-4:2004 is associated with the following European legislation: EU Directives/Regulations: 2004/108/EC, 2004/108/EU, 89/336/EEC; Standardization Mandates: M/490. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 61000-4-4:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2005
1DGRPHãþD
SIST EN 61000-4-4:1997
SIST EN 61000-4-4:1997/A1:2002
SIST EN 61000-4-4:1997/A2:2002
(OHNWURPDJQHWQD]GUXåOMLYRVW (0& ±GHO 3UHVNXVQHLQPHULOQHWHKQLNH±
3UHVNXVRGSRUQRVWLSURWLKLWULPHOHNWULþQLPSUHKRGQLPSRMDYRPUD]SRNX ,(&
Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques -
Electrical fast transient/burst immunity test
Elektromagnetische Verträglichkeit (EMV) -- Teil 4-4: Prüf- und Messverfahren - Prüfung
der Störfestigkeit gegen schnelle transiente elektrische Störgrößen/Burst
Compatibilité électromagnétique (CEM) -- Partie 4-4: Techniques d'essai et de mesure -
Essais d'immunité aux transitoires électriques rapides en salves
Ta slovenski standard je istoveten z: EN 61000-4-4:2004
ICS:
33.100.20 Imunost Immunity
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...