EN 61760-4:2015/A1:2018

SLOVENSKI STANDARD
01-oktober-2018
7HKQRORJLMDSRYUãLQVNHPRQWDåHGHO5D]YUãþDQMHSDNLUDQMHHWLNHWLUDQMHLQ
UDYQDQMH]QDSUDYDPLREþXWOMLYLPLQDYODJR
Surface mounting technology - Part 4: Classification, packaging, labelling and handling of
moisture sensitive devices
Oberflächenmontagetechnik - Teil 4: Genormtes Verfahren zur Klassifikation,
Verpackung, Kennzeichnung und Handhabung feuchteempfindlicher Bauteile
Technique du montage en surface (SMT) - Partie 4: Classification, emballage, étiquetage
et manipulation des dispositifs sensibles à l'humidité
Ta slovenski standard je istoveten z: EN 61760-4:2015/A1:2018
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61760-4:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2018
ICS 31.190
English Version
Surface mounting technology - Part 4: Classification, packaging,
labelling and handling of moisture sensitive devices
(IEC 61760-4:2015/A1:2018)
Technique du montage en surface (SMT) - Partie 4: Oberflächenmontagetechnik - Teil 4: Klassifikation,
Classification, emballage, étiquetage et manipulation des Verpackung, Kennzeichnung und Handhabung
dispositifs sensibles à l'humidité feuchteempfindlicher Bauteile
(IEC 61760-4:2015/A1:2018) (IEC 61760-4:2015/A1:2018)
This amendment A1 modifies the European Standard EN 61760-4:2015; it was approved by CENELEC on 2018-04-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61760-4:2015/A1:2018 E

European foreword
The text of document 91/1419/CDV, future edition 1 of IEC 61760-4:2015/A1, prepared by IEC/TC 91
"Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 61760-4:2015/A1:2018.

The following dates are fixed:
(dop) 2019-01-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-04-17
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 61760-4:2015/A1:2018 was approved by CENELEC as a
European Standard without any modification.
Replace the Bibliography of EN 61760-4:2015 by the following:

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60068-2-58:2015 NOTE Harmonized as EN 60068-2-58:2015 (not modified).
IEC 60068-2-78 NOTE Harmonized as EN 60068-2-78.
IEC 60749-20-1 NOTE Harmonized as EN 60749-20-1.
ISO 62 NOTE Harmonized as EN ISO 62.
Replace Annex ZA of EN 61760-4:2015 by the following:

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-1 -  Environmental testing -- Part 1: General EN 60068-1 -
and guidance
IEC 60749-20 -  Semiconductor devices - Mechanical and EN 60749-20 -
climatic test methods -- Part 20:
Resistance of plastic encapsulated SMDs
to the combined effect of moisture and
soldering heat
IEC 61340-5-1 -  Electrostatics - Part 5-1: Protection of EN 61340-5-1 -
electronic devices from electrostatic
phenomena - General requirements
...