EN IEC 62057-3:2024
(Main)Electrical energy meters - Test equipment, techniques and procedures - Part 3: Automatic meter testing system (AMTS)
Electrical energy meters - Test equipment, techniques and procedures - Part 3: Automatic meter testing system (AMTS)
IEC 62057-3:2024 applies to an automatic meter testing system (AMTS) permanently installed in a controlled environment. It covers the functions, technical requirements and acceptance methods of an AMTS. It also applies to a newly manufactured AMTS to test static active or reactive energy meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral). This document defines the kind of AMTS that can continuously and automatically carry out all the test items specified in IEC 62058-31, including visual inspection, AC voltage test, no-load condition, starting current, accuracy and meter constant test. This document does not apply to: • data interfaces to the meter and test procedures of data interface; • industrial controllers, industrial personal computers, and servers supplied along with the AMTS.
Elektrische Energiezähler - Prüfgeräte, Techniken und Verfahren - Teil 3: Automatisches Zählerprüfsystem (AMTS)
Compteurs d'énergie électrique - Équipement, techniques et procédures d'essai - Partie 3: Système d'essai automatisé des compteurs d'énergie électrique (AMTS)
IEC 62057-3:2024 s'applique à un système d'essai automatisé des compteurs d'énergie électrique (AMTS, automatic meter testing system) installé en permanence dans un environnement contrôlé. Elle couvre les fonctions, les exigences techniques et les méthodes de réception d’un AMTS. Elle s'applique également aux AMTS neufs destinés aux essais des compteurs statiques d'énergie active ou réactive sur les réseaux de 50 Hz ou 60 Hz avec une tension alternative inférieure ou égale à 600 V (tension entre phase et neutre). Le présent document définit le type d'AMTS qui peut réaliser en continu et de manière automatique tous les éléments d'essai spécifiés dans l'IEC 62058-31, y compris l'examen visuel, l'essai sous tension alternative, l'essai de condition de marche à vide, l'essai de courant de démarrage, l'essai de précision et l'essai de constante du compteur. Le présent document ne s’applique pas: • aux interfaces de communication avec le compteur et aux procédures d'essai de l'interface de communication; • aux contrôleurs industriels, aux ordinateurs personnels industriels et aux serveurs fournis avec l'AMTS.
Števci električne energije - Merilna oprema, tehnike in postopki - 3. del: Avtomatski preskusni sistem za števce (AMTS)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62057-3:2024
01-julij-2024
Števci električne energije - Merilna oprema, tehnike in postopki - 3. del:
Avtomatski preskusni sistem za števce (AMTS)
Electrical energy meters - Test equipment, techniques and procedures - Part 3:
Automatic meter testing system (AMTS)
Prüfgeräte, Techniken und Verfahren für elektrische Energiezähler – Teil 3:
Automatisches Zählerprüfsystem (AMTS)
Compteurs d'énergie électrique - Équipement, techniques et procédures d'essai - Partie
3: Système d'essai automatisé des compteurs d'énergie électrique (AMTS)
Ta slovenski standard je istoveten z: EN IEC 62057-3:2024
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
SIST EN IEC 62057-3:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62057-3:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 62057-3:2024
EUROPEAN STANDARD EN IEC 62057-3
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 17.220.20
English Version
Electrical energy meters - Test equipment, techniques and
procedures - Part 3: Automatic meter testing system (AMTS)
(IEC 62057-3:2024)
Compteurs d'énergie électrique - Équipement, techniques Elektrische Energiezähler - Prüfgeräte, Techniken und
et procédures d'essai - Partie 3: Système d'essai Verfahren - Teil 3: Automatisches Zählerprüfsystem (AMTS)
automatisé des compteurs d'énergie électrique (AMTS) (IEC 62057-3:2024)
(IEC 62057-3:2024)
This European Standard was approved by CENELEC on 2024-05-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62057-3:2024 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62057-3:2024
EN IEC 62057-3:2024 (E)
European foreword
The text of document 13/1916/FDIS, future edition 1 of IEC 62057-3, prepared by IEC/TC 13
"Electrical energy measurement and control" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62057-3:2024.
The following dates are fixed:
latest date by which the document has to be implemented at national level (dop) 2025-02-28
by publication of an identical national standard or by endorsement
latest date by which the national standards conflicting with the (dow) 2027-05-28
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62057-3:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
1
IEC 62052-11:2020 NOTE Approved as EN IEC 62052-11:2021 (not modified)
1
As impacted by EN IEC 62052-11:2021+A11:2022 and EN IEC 62052-11:2021+A12:2024.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62057-3:2024
EN IEC 62057-3:2024 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that som
...
SLOVENSKI STANDARD
oSIST prEN IEC 62057-3:2023
01-februar-2023
Merilna oprema, tehnike in postopki za števce električne energije - 3. del:
Avtomatski preskusni sistem za števce (AMTU)
Test equipment, techniques and procedures for electrical energy meters - Part 3:
Automatic Meter Testing System (AMTS)
Ta slovenski standard je istoveten z: prEN IEC 62057-3:2022
ICS:
17.220.20 Merjenje električnih in Measurement of electrical
magnetnih veličin and magnetic quantities
oSIST prEN IEC 62057-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 62057-3:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62057-3:2023
13/1874/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62057-3 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-11-25 2023-02-17
SUPERSEDES DOCUMENTS:
13/1849/CD, 13/1872/CC
IEC TC 13 : ELECTRICAL ENERGY MEASUREMENT AND CONTROL
SECRETARIAT: SECRETARY:
Hungary Mr Bela Bodi
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
IEC 62057-3 ED1 Test equipment, techniques and procedures for electrical energy meters - Part
3: Automatic Meter Testing System (AMTS)
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62057-3:2023
– 2 – IEC CDV 62057-3 ED1 CDV © IEC:2022
1 CONTENTS
2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 7
8 4 General . 8
9 5 Functional requirements . 8
10 5.1 Visual inspection of DUTs . 8
11 5.2 AC voltage test of DUTs. 8
12 5.3 Accuracy test of DUTs . 8
13 5.4 Conveying . 8
14 5.5 Connecting and disconnecting . 9
15 6 Standard electrical values . 9
16 6.1 Mains supply . 9
17 6.2 Visual inspection unit . 9
18 6.3 AC voltage test unit. 9
19 6.4 AMTU . 9
20 7 Software Requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.