EN 60747-16-5:2013/A1:2020
(Amendment)Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators
Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators
The contents of the corrigendum of September 2020 have been included in this copy.
Halbleiterbauelemente - Teil 16-5: Integrierte Mikrowellenschaltkreise - Oszillatoren
Dispositifs à semiconducteurs - Partie 16-5: Circuits intégrés hyperfréquences - Oscillateurs
Le contenu du corrigendum d'août 2020 ne concerne que la version anglaise de ce document.
Polprevodniški elementi - 16-5. del: Mikrovalovna integrirana vezja - Oscilatorji - Dopolnilo A1 (IEC 60747-16-5:2013/A1:2020)
General Information
Relations
Overview
EN 60747-16-5:2013/A1:2020 is a European standard developed under the CLC (European Committee for Electrotechnical Standardization) framework, aligning with the international IEC 60747-16-5:2013/A1:2020 standard. It focuses on semiconductor devices, specifically part 16-5 which covers microwave integrated circuits, with a detailed concentration on oscillators used in microwave applications. This amendment includes updates from the September 2020 corrigendum to ensure accuracy and relevance in semiconductor oscillator testing and characterization.
This standard is essential for professionals and organizations involved in the design, manufacturing, testing, and application of microwave integrated oscillator circuits. It provides normative references, measurement principles, and terminological clarifications, promoting consistency and reliability in semiconductor device performance assessments.
Key Topics
Microwave Integrated Circuits - Oscillators: Defines parameters, testing methods, and specifications for oscillators operating at microwave frequencies, ensuring standardization across devices.
Phase Noise Measurement: Clarifies the definition and measurement of phase noise (L(f)), a critical parameter indicating the short-term frequency stability of oscillators important for communication and radar systems.
Load Mismatch Tolerance: Specifies maximum allowable load VSWR (Voltage Standing Wave Ratio) to prevent performance degradation due to impedance mismatches.
Harmonic and Spurious Distortion Ratios: Provides formulas and procedures for calculating harmonic distortion ratios and spurious distortion ratios, enabling assessment of signal purity and oscillator quality.
Measurement Principles and Precautions: Outlines circuit loss considerations, power measurement points, and standardized test methods to ensure accurate and repeatable oscillator characterization.
Terminology Updates: Includes refined definitions for common terms such as phase noise and load mismatch tolerance to align with current industry vernacular and international standards.
Applications
EN 60747-16-5:2013/A1:2020 serves as a foundation for:
Microwave Communication Systems: Ensuring oscillators maintain stable frequencies with minimal phase noise, essential for transmitters and receivers in mobile networks, satellite communications, and radar.
Semiconductor Device Manufacturers: Standardizing oscillator performance testing methods to achieve uniform quality and facilitate independent device comparison.
Test and Measurement Industry: Providing validated procedures for electronic measurement equipment manufacturers involved in oscillator signal analysis.
Research & Development: Guiding semiconductor research teams in defining performance metrics and designing oscillators optimized for microwave integrated circuit applications.
Quality Assurance and Compliance: Assisting certification bodies and regulatory organizations in verifying compliance with industry standards for microwave oscillators.
Related Standards
IEC 60747-4:2007 + A1:2017: Covers discrete microwave semiconductor devices such as diodes and transistors, complementing integrated circuit oscillator standards.
IEC 60747-16-3:2002 + A1:2009 + A2:2017: Addresses microwave integrated circuits focused on frequency converters; linked to oscillator functions within microwave signal processing.
IEC 60050-561:2014: Provides fundamental terminologies including phase noise definitions referenced in this standard.
EN 60747 Series: A broader set of standards on semiconductor devices providing context and baseline specifications for integrated circuits and microwave components.
By adhering to EN 60747-16-5:2013/A1:2020, industry players guarantee precise measurement, minimized signal distortion, and robust oscillator performance-key factors driving advances in microwave semiconductor technology. This standard enhances interoperability and reliability, critical for the fast-growing sectors of wireless communication, aerospace, and defense electronics.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2020
Polprevodniški elementi - 16-5. del: Mikrovalovna integrirana vezja - Oscilatorji -
Dopolnilo A1 (IEC 60747-16-5:2013/A1:2020)
Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators (IEC
60747-16-5:2013/A1:2020)
Halbleiterbauelemente - Teil 16-5: Integrierte Mikrowellenschaltkreise - Oszillatoren (IEC
60747-16-5:2013/A1:2020)
Dispositifs à semiconducteurs - Partie 16-5: Circuits intégrés hyperfréquences -
Oscillateurs (IEC 60747-16-5:2013/A1:2020)
Ta slovenski standard je istoveten z: EN 60747-16-5:2013/A1:2020
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
31.200 Integrirana vezja, Integrated circuits.
mikroelektronika Microelectronics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60747-16-5:2013/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2020
ICS 31.080.99
English Version
Semiconductor devices - Part 16-5: Microwave integrated
circuits - Oscillators
(IEC 60747-16-5:2013/A1:2020 + COR1:2020)
Dispositifs à semiconducteurs - Partie 16-5: Circuits Halbleiterbauelemente - Teil 16-5: Integrierte
intégrés hyperfréquences - Oscillateurs Mikrowellenschaltkreise - Oszillatoren
(IEC 60747-16-5:2013/A1:2020 + COR1:2020) (IEC 60747-16-5:2013/A1:2020 + COR1:2020)
This amendment A1 modifies the European Standard EN 60747-16-5:2013; it was approved by CENELEC on 2020-08-18. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60747-16-5:2013/A1:2020 E
European foreword
The text of document 47E/673/CDV, future IEC 60747-16-5/A1+COR1, prepared by SC 47E "Discrete
semiconductor devices" of IEC/TC 47 "Semiconductor devices" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 60747-16-5:2013/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-08-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60747-16-5:2013/A1:2020+COR1:2020 was approved by
CENELEC as a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Replace the existing references IEC 60747-4 and IEC 60747-16-3 by the following new references:
Publication Year Title EN/HD Year
IEC 60747-4 2007 Semiconductor devices - Discrete devices - -
- Part 4: Microwave diodes and transistors
+ A1 2017 - -
IEC 60747-16-3 2002 Semiconductor devices - Part 16-3: EN 60747-16-3 2002
Microwave integrated circuits - Frequency
converters
+ A1 2009 + A1 2009
+ A2 2017 + A2 2017
IEC 60747-16-5 ®
Edition 1.0 2020-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Semiconductor devices –
Part 16-5: Microwave integrated circuits – Oscillators
Dispositifs à semiconducteurs –
Partie 16-5: Circuits intégrés hyperfréquences – Oscillateurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.080.99 ISBN 978-2-8322-8746-0
Marque déposée de la Commiss
...
Frequently Asked Questions
EN 60747-16-5:2013/A1:2020 is a amendment published by CLC. Its full title is "Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators". This standard covers: The contents of the corrigendum of September 2020 have been included in this copy.
The contents of the corrigendum of September 2020 have been included in this copy.
EN 60747-16-5:2013/A1:2020 is classified under the following ICS (International Classification for Standards) categories: 31.080.99 - Other semiconductor devices. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 60747-16-5:2013/A1:2020 has the following relationships with other standards: It is inter standard links to EN 60747-16-5:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN 60747-16-5:2013/A1:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CLC standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...