EN IEC 60695-4:2021
(Main)Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products
IEC 60695-4:2021 is available as IEC 60695-4:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60695-4:2021 The terms and definitions in this part of IEC 60695 are applicable to fire tests for electrotechnical products. This basic safety publication focusing on safety guidance is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This fifth edition cancels and replaces the fourth edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The terms and definitions that are not specifically electrotechnical and that are either identical or equivalent to those in ISO 13943:2017 have been deleted. b) The terms and definitions that are specifically electrotechnical and that are in ISO 13943:2017 have been included for the convenience of the user. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51.
Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen elektrotechnischer Produkte
Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour les produits électrotechniques
IEC 60695-4:2021 est disponible sous forme de IEC 60695-4:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.IEC 60695-4:2021 Les termes et définitions définis dans la présente partie de l'IEC 60695 sont applicables aux essais au feu pour les produits électrotechniques. La présente publication fondamentale de sécurité portant sur des recommandations de sécurité est avant tout destinée à être utilisée par les comités d’études dans le cadre de l'élaboration de publications de sécurité, conformément aux principes établis dans le Guide IEC 104 et le Guide ISO/IEC 51. L’une des responsabilités d’un comité d’études consiste, le cas échéant, à utiliser les publications fondamentales de sécurité dans le cadre de l’élaboration de ses publications. Les exigences, méthodes d’essai ou conditions d’essai de cette publication fondamentale de sécurité ne s’appliquent pas, sauf si elles sont spécifiquement citées en référence ou incluses dans les publications correspondantes. Cette cinquième édition annule et remplace la quatrième édition parue en 2012. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Les termes et définitions qui ne concernent pas spécifiquement l'électrotechnique et qui sont soit identiques soit équivalents à ceux de l'ISO 13943:2017 ont été supprimés. b) Les termes et définitions qui sont spécifiquement électrotechniques et qui figurent dans l'ISO 13943:2017 ont été inclus dans un souci de commodité pour l'utilisateur. Elle a le statut d’une publication fondamentale de sécurité conformément au Guide IEC 104 et au Guide ISO/IEC 51.
Preskušanje požarne ogroženosti - 4. del: Izrazje v zvezi s požarnimi preskusi elektrotehničnih proizvodov (IEC 60695-4:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2021
Nadomešča:
SIST EN 60695-4:2012
Preskušanje požarne ogroženosti - 4. del: Izrazje v zvezi s požarnimi preskusi
elektrotehničnih proizvodov (IEC 60695-4:2021)
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical
products (IEC 60695-4:2021)
Prüfungen zur Beurteilung der Brandgefahr - Teil 4: Terminologie der Brandprüfungen
elektrotechnischer Produkte (IEC 60695-4:2021)
Essais relatifs aux risques du feu - Partie 4: Terminologie relative aux essais au feu pour
les produits électrotechniques (IEC 60695-4:2021)
Ta slovenski standard je istoveten z: EN IEC 60695-4:2021
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60695-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 01.040.13; 29.020 Supersedes EN 60695-4:2012 and all of its amendments
and corrigenda (if any)
English Version
Fire hazard testing - Part 4: Terminology concerning fire tests for
electrotechnical products
(IEC 60695-4:2021)
Essais relatifs aux risques du feu - Partie 4: Terminologie Prüfungen zur Beurteilung der Brandgefahr - Teil 4:
relative aux essais au feu pour les produits Terminologie der Brandprüfungen elektrotechnischer
électrotechniques Produkte
(IEC 60695-4:2021) (IEC 60695-4:2021)
This European Standard was approved by CENELEC on 2021-07-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60695-4:2021 E
European foreword
The text of document 89/1462/CDV, future edition 5 of IEC 60695-4, prepared by IEC/TC 89 “Fire
hazard testing” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–04–28
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–07–28
document have to be withdrawn
This document supersedes EN 60695-4:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60695-4:2021 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 series International Electrotechnical Vocabulary - -
IEC Guide 104 - The preparation of safety publications and - -
the use of basic safety publications and
group safety publications
ISO 13943 2017 Fire safety - Vocabulary EN ISO 13943 2017
ISO/IEC Guide 51 - Safety aspects - Guidelines for their - -
inclusion in standards
IEC 60695-4 ®
Edition 5.0 2021-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fire hazard testing –
Part 4: Terminology concerning fire tests for electrotechnical products
Essais relatifs aux risques du feu –
Partie 4: Terminologie relative aux essais au feu pour les produits
électrotechniques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.040.13; 29.020 ISBN 978-2-8322-9906-7
– 2 – IEC 60695-4:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
3.1 Use of the term “item” . 5
3.2 Other terms and definitions . 5
IEC 60695-4:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIRE HAZARD TESTING –
Part 4: Terminology concerning fire tests
for electrotechnical products
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whats
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.