EN IEC 62840-2:2019

SLOVENSKI STANDARD
01-maj-2019
6LVWHPPHQMDYHEDWHULMHOHNWULþQLKYR]LOGHO9DUQRVWQH]DKWHYH
Electric vehicle battery swap system - Part 2: Safety requirements
Batteriewechselsysteme für Elektrofahrzeuge - Teil 2: Sicherheitsanforderungen
Système d'échange de batterie pour véhicule électrique - Partie 2: Exigences de sécurité
Ta slovenski standard je istoveten z: EN IEC 62840-2:2019
ICS:
43.120 (OHNWULþQDFHVWQDYR]LOD Electric road vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62840-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2019
ICS 43.120
English Version
Electric vehicle battery swap system - Part 2: Safety
requirements
(IEC 62840-2:2016)
Système d'échange de batterie de véhicule électrique - Batteriewechselsysteme für Elektrofahrzeuge - Teil 2:
Partie 2: Exigences de sécurité Sicherheitsanforderungen
(IEC 62840-2:2016) (IEC 62840-2:2016)
This European Standard was approved by CENELEC on 2016-11-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62840-2:2019 E

European foreword
The text of document 69/420/FDIS, future edition 1 of IEC 62840-2, prepared by IEC/TC 69 "Electric
road vehicles and electric industrial trucks" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62840-2:2019.
The following dates are fixed:
(dop) 2019-08-01
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2022-02-01
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62840-2:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60947-5-1 NOTE Harmonized as EN 60947-5-1.
IEC 61000 series NOTE Harmonized in EN 61000 series.
IEC 61851-1 NOTE Harmonized as EN 61851-1.
IEC 61851-21-2 NOTE Harmonized as EN 61851-21-2 .
IEC 61851-3 series NOTE Harmonized in CLC/TS 61851-3 series .
ISO 4413 NOTE Harmonized as EN ISO 4413
ISO 4414 NOTE Harmonized as EN ISO 4414

Under preparation. Stage at time of publication: CLC/prTS 61851 series.
EN IEC 62840 2:2019 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60038 -  IEC standard voltages EN 60038 -
IEC 60112 -  Method for the determination of the EN 60112 -
proof and the comparative tracking
indices of solid insulating materials
IEC 60204-1 -  Safety of machinery - Electrical EN 60204-1 -
equipment of machines -
Part 1: General requirements
IEC 60364 series Low-voltage electrical installations HD 384 / series
HD 60364
IEC 60364-4-41 (mod) 2005 Low-voltage electrical installations - HD 60364-4-41 2007
Part 4-41: Protection for safety -
+ A11 2017
- -
Protection against electric shock
IEC 60364-5-54 -  Low-voltage electrical installations - HD 60364-5-54 -
Part 5-54: Selection and erection of
electrical equipment - Earthing
arrangements and protective conductors
IEC 60364-7-722 -  Low-voltage electrical installations - HD 60364-7-722 -
Part 7-722: Requirements for special
installations or locations - Supplies for
electric vehicles
IEC/TS(TR) 60479 series Effects of current on human beings and - -
livestock
IEC 60529 -  Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 60664-1 2007 Insulation coordination for equipment EN 60664-1 2007
within low-voltage systems -
Part 1: Principles, requirements and
tests
Publication Year Title EN/HD Year
IEC 60695-2-11 -  Fire hazard testing - EN 60695-2-11 -
Part 2-11: Glowing/hot-wire based test
methods - Glow-wire flammability test
method for end-products (GWEPT)
IEC 60695-10-2 -  Fire hazard testing - EN 60695-10-2 -
Part 10-2: Abnormal heat - Ball pressure
test method
IEC/TR 60755 -  General requirements for residual - -
current operated protective devices
IEC 60898-1 -  Electrical accessories - Circuit-breakers EN 60898-1 -
for overcurrent protection for household
and similar installations -
Part 1: Circuit-breakers for a.c.
operation
IEC 60947-2 -  Low voltage switchgear and EN 60947-2 -
controlgear -
Part 2: Circuit-breakers
IEC 60947-3 -  Low-voltage switchgear and EN 60947-3 -
controlgear -
Part 3: Switches, disconnectors, switch-
disconnectors and fuse-combination
units
IEC 60947-4-1 -  Low-voltage switchgear and EN 60947-4-1 -
controlgear -
Part 4-1: Contactors and motor-starters -
Electromechanical contactors and
motor-starters
IEC 60950-1 (mod) 2005 Information technology equipment - EN 60950-1 2006
Safety -
- -  + A11 2009
Part 1: General requirements
+ A1 (mod) 2009 + A1 2010
- -  + A12 2011
- -  + AC 2011
+ A2 (mod) 2013 + A2 2013
IEC 61000-6-7 -  Electromagnetic compatibility (EMC) - EN 61000-6-7 -
Part 6-7: Generic standards - Immunity
requirements for equipment intended to
perform functions in a safety-related
system (functional safety) in industrial
locations
IEC 61008 series Residual current operated circuit- EN 61008 series
breakers without integral overcurrent
protection for household and similar
uses (RCCB's)
IEC 61008-1 -  Residual current operated circuit- EN 61008-1 -
breakers without integral overcurrent
protection for household and similar
uses (RCCB's) -
Part 1: General rules
EN IEC 62840 2:2019 (E)
Publication Year Title EN/HD Year
IEC 61009 series Residual current operated circuit- EN 61009 series
breakers with integral overcurrent
protection for household and similar
uses (RCBOs)
IEC 61009-1 -  Residual current operated circuit- EN 61009-1 -
breakers with integral overcurrent
protection for household and similar
uses (RCBOs) -
Part 1: General rules
IEC 61140 -  Protection against electric shock - EN 61140 -
Common aspects for installation and
equipment
IEC 61439-1 2011 Low-voltage switchgear and controlgear EN 61439-1 2011
assemblies -
Part 1: General rules
IEC 61508-1 -  Functional safety of EN 61508-1 -
electrical/electronic/programmable
electronic safety-related systems -
Part 1: General requirements
IEC 61511-1 -  Functional safety - Safety instrumented EN 61511-1 -
systems for the process industry sector -
Part 1: Framework, definitions, system,
hardware and application programming
requirements
IEC 61784-3 -  Industrial communication networks - EN 61784-3 -
Profiles -
Part 3: Functional safety fieldbuses -
General rules and profile definitions
IEC 61810-1 -  Electromechanical elementary relays - EN 61810-1 -
Part 1: General and safety requirements
IEC 61851-23 2014 Electric vehicle conductive charging EN 61851-23 2014
system -
Part 23: D.C. electric vehicle charging
station
IEC 62052-11 -  Electricity metering equipment (AC) - EN 62052-11 -
General requirements, tests and test
conditions -
Part 11: Metering equipment
IEC 62262 -  Degrees of protection provided by EN 62262 -
enclosures for electrical equipment
against external mechanical impacts (IK
code)
IEC 62423 -  Type F and type B residual current EN 62423 -
operated circuit-breakers with and
without integral overcurrent protection
for household and similar uses
IEC 62840-1 2016 Electric vehicle battery swap system - - -
Part 1: General and guidance
ISO 2972 -  Numerical control of machines; Symbols - -
ISO 7000 -  Graphical symbols for use on - -
equipment - Registered symbols
Publication Year Title EN/HD Year
ISO 10218-1 -  Robots and robotic devices - Safety EN ISO 10218-1 -
requirements for industrial robots -
Part 1: Robots
ISO 10218-2 -  Robots and robotic devices - Safety EN ISO 10218-2 -
requirements for industrial robots -
Part 2: Robot systems and integration
ISO 12405-1 -  Electrically propelled road vehicles - - -
Test specification for lithium-ion traction
battery packs and systems -
Part 1: High-power applications
ISO 13849-1 -  Safety of machinery - Safety-related EN ISO 13849-1 -
parts of control systems -
Part 1: General principles for design
ISO 14119 -  Safety of machinery - Interlocking EN ISO 14119 -
devices associated with guards -
Principles for design and selection

IEC 62840-2 ®
Edition 1.0 2016-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electric vehicle battery swap system –

Part 2: Safety requirements
Système d'échange de batterie de véhicule électrique –

Partie 2: Exigences de sécurité

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 43.120 ISBN 978-2-8322-3632-1

– 2 – IEC 62840-2:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 7
3 Terms and definitions . 9
4 General . 11
5 Safety requirements of systems . 11
5.1 General . 11
5.2 Lane system . 12
5.2.1 Vehicle lane . 12
5.2.2 Measures in case of emergency . 12
5.3 Battery handling system . 12
5.3.1 Interlock protection guarding . 12
5.3.2 Interlock with the lane . 12
5.3.3 Battery handling process . 12
5.3.4 Measures in case of emergency . 13
5.4 Storage system . 13
5.4.1 Battery storage . 13
5.4.2 Measures in case of emergency . 14
5.5 Charging system .
...