EN 62496-1:2009

SLOVENSKI STANDARD
01-junij-2009
7LVNDQDYH]MD]RSWLþQLPLSRYH]DYDPLGHO6SORãQR,(&
Optical circuit boards - Part 1: General (IEC 62496-1:2008)
Optische Leiterplatten - Teil 1: Fachgrundspezifikation (IEC 62496-1:2008)
Cartes à circuits optiques - Partie 1: Généralités (CEI 62496-1:2008)
Ta slovenski standard je istoveten z: EN 62496-1:2009
ICS:
31.180 7LVNDQDYH]MD7,9LQWLVNDQH Printed circuits and boards
SORãþH
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62496-1
NORME EUROPÉENNE
April 2009
EUROPÄISCHE NORM
ICS 33.180.01; 31.180
English version
Optical circuit boards -
Part 1: General
(IEC 62496-1:2008)
Cartes à circuits optiques -  Optische Leiterplatten -
Partie 1: Généralités Teil 1: Fachgrundspezifikation
(CEI 62496-1:2008) (IEC 62496-1:2008)

This European Standard was approved by CENELEC on 2009-03-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62496-1:2009 E
Foreword
The text of document 86/307/FDIS, future edition 1 of IEC 62496-1, prepared by IEC TC 86, Fibre optics,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62496-1 on
2009-03-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2009-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-03-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62496-1:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068 NOTE  Harmonized in EN 60068 series (not modified).
IEC 60793-1-1 NOTE  Harmonized as EN 60793-1-1:2003 (not modified).
IEC 60869-1 NOTE  Harmonized as EN 60869-1:2000 (not modified).
IEC 60874 NOTE  Harmonized in EN 60874 series (not modified).
IEC 61073-1 NOTE  Harmonized as EN 61073-1:2000 (not modified).
IEC 61753 NOTE  Harmonized in EN 61753 series (not modified).
IEC 61754-2 NOTE  Harmonized as EN 61754-2:1997 (not modified).
IEC 61754-4 NOTE  Harmonized as EN 61754-4:1997 (not modified).
IEC 61754-13 NOTE  Harmonized as EN 61754-13:1999 (not modified).
IEC 62005 NOTE  Harmonized in EN 62005 series (not modified).
__________
– 3 – EN 62496-1:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology
1)
IEC 60050-731 - International Electrotechnical Vocabulary - -
(IEV) -
Chapter 731: Optical fibre communication

IEC 60617 Data Graphical symbols for diagrams - -
base
1) 2)
IEC 60695-11-5 - Fire hazard testing - EN 60695-11-5 2005
Part 11-5: Test flames - Needle-flame test
method - Apparatus, confirmatory test
arrangement and guidance
1) 2)
IEC 60825-1 - Safety of laser products - EN 60825-1 2007
Part 1: Equipment classification and
requirements
1) 2)
IEC 60825-2 - Safety of laser products - EN 60825-2 2004
Part 2: Safety of optical fibre communication
systems (OFCS)
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
1)
IEC/TR 61930 - Fibre optic graphical symbology - -

1)
IEC/TR 61931 - Fibre optic - Terminology - -

1)
ISO 129-1 - Technical drawings - Indication of - -
dimensions and tolerances -
Part 1: General principles
1) 2)
ISO 286-1 - ISO system of limits and fits - EN 20286-1 1993
Part 1: Bases of tolerances, deviations and fits

1) 2)
ISO 1101 - Geometrical Product Specifications (GPS) - EN ISO 1101 2005
Geometrical tolerancing - Tolerances of form,
orientation, location and run-out

1)
ISO 8601 - Data elements and interchange formats - - -
Information interchange - Representation of
dates and times
1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62496-1
Edition 1.0 2008-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical circuit boards –
Part 1: General
Cartes à circuits optiques –
Partie 1: Généralités
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 33.180.01; 31.180 ISBN 2-8318-1018-5
– 2 – 62496-1 © IEC:2008
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references.6
3 Terms and definitions .7
4 Requirements .9
4.1 General .9
4.2 Classification.9
4.2.1 Introductory remark.9
4.2.2 Type .10
4.2.3 Style .10
4.2.4 Variant.14
4.2.5 Normative reference extension.15
4.3 Documentation .15
4.3.1 Symbols.15
4.3.2 Standard system .15
4.3.3 Drawings .17
4.3.4 Test and measurement .17
4.3.5 Instructions for use .18
4.4 Standardization system.18
4.4.1 Performance standards.18
4.4.2 Reliability standards.18
4.4.3 Interlinking.19
4.5 Design and construction .19
4.5.1 Materials.19
4.5.2 Workmanship .20
4.6 Performance.20
4.7 Identification and marking.20
4.7.1 Introductory remark.20
4.7.2 Variant identification number.20
4.7.3 Component marking.20
4.7.4 Package marking .20
4.8 Packaging .21
4.9 Storage conditions.21
4.10 Safety.21
Bibliography .22

Figure 1 – Schematic views of waveguide circuit boards .8
Figure 2 – Configuration A.11
Figure 3 – Configuration B.12
Figure 4 – Configuration C-1 .13
Figure 5 – Configuration C-2 .13
Figure 6 – Configuration D-1 .14
Figure 7 – Configuration D-2 .14

Table 1 – Example of a typical optical circuit board classification .10

62496-1 © IEC:2008 – 3 –
Table 2 – IEC standard structure .16
Table 3 – Standards interlink matrix .19

– 4 – 62496-1 © IEC:2008
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL CIRCUIT BOARDS –
Part 1: General
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in
...