EN 61988-2-3:2009

SLOVENSKI STANDARD
01-januar-2010
3ORãþHVSOD]HPVNLPSULND]RYDOQLNRPGHO0HULOQHPHWRGH.DNRYRVW,(&

Plasma display panels - Part 2-3: Measuring methods - Quality (IEC 61988-2-3:2009)
Plasmabildschirme - Teil 2-3: Messverfahren - Bildqualität: Defekte und
Bildverschlechterung (IEC 61988-2-3:2009)
Panneaux d'affichage à plasma - Partie 2-3: Méthodes de mesure - Qualité (CEI 61988-2
-3:2009)
Ta slovenski standard je istoveten z: EN 61988-2-3:2009
ICS:
31.120 Elektronske prikazovalne Electronic display devices
naprave
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SLOVENSKI STANDARD
01-januar-2010
3ORãþHVSOD]HPVNLPSULND]RYDOQLNRPGHO0HULOQHPHWRGH.DNRYRVW,(&

Plasma display panels - Part 2-3: Measuring methods - Quality (IEC 61988-2-3:2009)
Plasmabildschirme - Teil 2-3: Messverfahren - Bildqualität: Defekte und
Bildverschlechterung (IEC 61988-2-3:2009)
Panneaux d'affichage à plasma - Partie 2-3: Méthodes de mesure - Qualité (CEI 61988-2
-3:2009)
Ta slovenski standard je istoveten z: EN 61988-2-3:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61988-2-3
NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM
ICS 31.260
English version
Plasma display panels -
Part 2-3: Measuring methods -
Image quality: defects and degradation
(IEC 61988-2-3:2009)
Panneaux d'affichage à plasma -  Plasmabildschirme -
Partie 2-3: Méthodes de mesure - Teil 2-3: Messverfahren -
Qualité d'image: défauts Bildqualität: Defekte
et dégradation und Bildverschlechterung
(CEI 61988-2-3:2009) (IEC 61988-2-3:2009)

This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-2-3:2009 E
Foreword
The text of document 110/180/FDIS, future edition 1 of IEC 61988-2-3, prepared by IEC TC 110, Flat
panel display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 61988-2-3 on 2009-09-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61988-2-3:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61966-5 NOTE  Harmonized as EN 61966-5:2009 (not modified).
IEC 61988-2-2 NOTE  Harmonized as EN 61988-2-2:2003 (not modified).
__________
- 3 - EN 61988-2-3:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60107-1 1997 Methods of measurement on receivers for EN 60107-1 1997
television broadcast transmissions -
Part 1: General considerations -
Measurements at radio and video frequencies

2) 3)
IEC 61988-1 - Plasma display panels - EN 61988-1 2003
Part 1: Terminology and letter symbols

IEC 61988-2-1 2002 Plasma display panels - EN 61988-2-1 2002
Part 2-1: Measuring methods - Optical

CIE 15 2004 Colorimetry - -
1)
EN 60068-1 includes A1:1992 to IEC 60068-1 + corr. October 1988.
2)
Undated reference.
3)
Valid edition at date of issue.

IEC 61988-2-3 ®
Edition 1.0 2009-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Plasma display panels –
Part 2-3: Measuring methods – Image quality: defects and degradation

Panneaux d’affichage à plasma –
Partie 2-3: Méthodes de mesure – Qualité d’image: défauts et dégradation

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
S
CODE PRIX
ICS 31.260 ISBN 2-8318-1052-6
– 2 – 61988-2-3 © IEC:2009
CONTENTS
FOREWORD.4
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Standard measuring conditions.7
4.1 Environmental conditions .7
4.2 Lighting conditions .7
4.3 Set-up conditions .7
4.3.1 Adjustment of PDP modules .7
4.3.2 Warm-up condition of PDP modules .7
4.3.3 Conditions of measuring and driving equipment.7
5 Measuring methods .8
5.1 Cell defects .8
5.1.1 Purpose.8
5.1.2 Measuring equipment .8
5.1.3 Measuring layout .8
5.1.4 Division of display zone .8
5.1.5 Classification of cell defects .9
5.1.6 Luminance levels of defective cells.9
5.1.7 Measuring procedure.11
5.2 Image sticking .12
5.2.1 Purpose.12
5.2.2 Measuring equipment .12
5.2.3 Specification of image sticking.13
5.2.4 Measuring procedure.13
5.3 Luminance lifetime .15
5.3.1 Purpose.15
5.3.2 Measuring equipment .16
5.3.3 Measuring procedure.16
Annex A (informative) Luminance lifetime estimation .18
Bibliography.23

Figure 1 – Measuring system and its arrangement .8
Figure 2 – Example of display zone .9
Figure 3 – Dark defect on green screen and its luminance level.10
Figure 4 – Bright defect on white screen and its luminance level.10
Figure 5 – Bright defect on black screen and its luminance level.10
Figure 6 – Bright defect on other colour screen and its luminance level .11
Figure 7 – Image sticking pattern .13
Figure 8 – Image sticking measuring position.14
Figure 9 – Stabilization of luminance lifetime measurement .16
Figure 10 – Example of luminance lifetime measurement.17
Figure A.1 – An example of luminance degradation under different luminance
conditions .19

61988-2-3 © IEC:2009 – 3 –
Figure A.2 – The luminance degradation on log t axis .19
1/2
Figure A.3 – The luminance degradation on L(t) vs. t axis (an example of straight
line) .21
1/2
Figure A.4 – The luminance degradation on L(t) vs. t axis .21
Figure A.5 – Flow of luminance lifetime estimation.22

Table 1 – Input signal for cell defect observation .12
Table 2 – An example record of cell defects.12
Table 3 – Example of image sticking coefficient measurement (full screen red) .15

– 4 – 61988-2-3 © IEC:2009
INTERNATIONAL ELECTROTECHNICAL COMMISSION
––––––––––––
PLASMA DISPLAY PANELS –
Part 2-3: Measuring methods –
Image quality: defects and degradation

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or f
...