EN 63002:2017
(Main)Identification and communication interoperability method for external power supplies used with portable computing devices
Identification and communication interoperability method for external power supplies used with portable computing devices
IEC 63002:20016 defines interoperability guidelines for external power supplies used with portable computing devices that implement the IEC 62680-1-2: Universal Serial Bus Power Delivery Specification with the IEC 62680-1-3: Universal Serial Bus Interfaces for data and power-Common Components- Type-CTM Type-C Cable and Connector Specification. It specifies the data objects used by a portable computing system using IEC 62680-1-2 to understand the identity, design and performance characteristics, and operating status of an external power supply. This International Standard is applicable to external power supplies under 100 watts for portable computing devices, with a focus on power delivery application for notebook computers, tablets, smartphones and other related multimedia devices.
Identifikation und Kommunikation Interoperabilitätsverfahren für externe Stromversorgungen in tragbaren Computergeräten
Méthode d'identification et d'interopérabilité des communications des alimentations externes utilisées avec les dispositifs informatiques portatifs
L'IEC 63002:20016 définit les lignes directrices en matière d'interopérabilité des alimentations externes utilisées avec les dispositifs informatiques portatifs mis en oeuvre dans le cadre de l'IEC 62680-1-2: Universal Serial Bus Power Delivery Specification avec l'IEC 62680-1-3: Universal Serial Bus Interfaces for data and power - Common Components - Type-CTM Type-C Cable and Connector Specification (disponible en anglais seulement). Elle spécifie les objets de données utilisés par un système informatique portatif s'appuyant sur l'IEC 62680-1-2 pour appréhender les caractéristiques d'identité, de conception et de performances, ainsi que l'état de fonctionnement d'une alimentation externe. La présente Norme internationale s'applique à des alimentations externes de moins de 100 watts destinées à des dispositifs informatiques portatifs, en mettant l'accent sur l'application de distribution de puissance pour les ordinateurs portables, les tablettes, les terminaux de poche et autres dispositifs multimédia connexes.
Postopek identifikacije in interoperabilnosti komunikacij zunanjih napajalnikov, ki se uporabljajo pri prenosnih računalniških napravah (IEC 63002:2016)
Specifikacija za dovajanje moči s standardom IEC 62680-1-3: vmesniki USB za podatkovne in močnostne komponente tipa CTM, specifikacija za kable in priključke tipa C.
Ta mednarodni standard določa normativne zahteve za EPS (zunanji napajalnik) za namene zagotavljanja interoperabilnosti; določa zlasti podatke, posredovane iz zunanjega napajalnika v prenosno računalniško napravo (slika 1). Področje uporabe se ne uporablja za vse vidike zunanjega napajalnika. Ta mednarodni standard ne določa normativnih zahtev za prenosno računalniško napravo, temveč podaje priporočila za delovanje prenosne računalniške naprave, kadar se uporablja z zunanjim napajalnikom v skladu s tem mednarodnim standardom.
Ta mednarodni standard določa podatkovne objekte, ki jih uporablja prenosni računalniški sistem v skladu s standardom IEC 62680-1-2 za razumevanje identitete, zasnove in zmogljivosti ter stanja delovanja zunanjega napajalnika. Ta mednarodni standard se uporablja za zunanje napajalnike z močjo manj kot 100 W za prenosne računalniške naprave, s poudarkom na zagotavljanju moči prenosnim računalnikom, tabličnim računalnikom, pametnim telefonom in drugim povezanim večpredstavnostnim napravam.
Ta mednarodni standard temelji na uveljavljenih mehanskih in električnih specifikacijah ter komunikacijskih protokolih, ki jih določata IEC 62680-1-2 in IEC 62680-1-3. Ta mednarodni standard predlaga metode, ki jih podpira IEC 62680-1-2, za zmanjšanje težav, ki jih povzroča povezava nepreizkušenih kombinacij zunanjih napajalnikov in prenosnih računalniških naprav s ciljem povečati zadovoljstvo potrošnikov.
Poleg tega ta mednarodni standard, kot je podano v dodatku C, določa smernice glede interoperabilnosti za polnjenje, ki podpira uporabo zunanjega napajalnika z uporabo toka prek priključka USB tipa C, kadar funkcionalnost IEC 62680-1-2 ni omogočena. Vidiki glede kaptivnega in odstranljivega kabla so predstavljeni v dodatku B.
Zunanji napajalnik mora izpolnjevati določila ustreznih globalnih standardov in zahteve glede skladnosti s predpisi. Primeri teh standardov so navedeni v dodatku F.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2018
3RVWRSHNLGHQWLILNDFLMHLQLQWHURSHUDELOQRVWLNRPXQLNDFLM]XQDQMLKQDSDMDOQLNRYNL
VHXSRUDEOMDMRSULSUHQRVQLKUDþXQDOQLãNLKQDSUDYDK ,(&
Identification and communication interoperability method for external power supplies
used with portable computing devices (IEC 63002:2016)
Identifikation und Kommunikation Interoperabilitäts-Verfahren für externe Netzteile in
tragbaren Computern (IEC 63002:2016)
Méthode d'identification et d'interopérabilité des communications des alimentations
externes utilisées avec les dispositifs informatiques portatifs (IEC 63002:2016)
Ta slovenski standard je istoveten z: EN 63002:2017
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
35.020 Informacijska tehnika in Information technology (IT) in
tehnologija na splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 63002
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2017
ICS 31.020; 35.200
English Version
Identification and communication interoperability method for
external power supplies used with portable computing devices
(IEC 63002:2016)
Méthode d'identification et d'interopérabilité des Identifikation und Kommunikation Interoperabilitäts-
communications des alimentations externes utilisées avec Verfahren für externe Netzteile in tragbaren Computern
les dispositifs informatiques portatifs (IEC 63002:2016)
(IEC 63002:2016)
This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 63002:2017 E
European foreword
The text of document 100/2595A/CDV, future edition 1 of IEC 63002, prepared by Technical Area 14
"Interfaces and methods of measurement for personal computing equipment", of IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 63002:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2017-09-03
national level by publication of an identical national
standard or by endorsement
(dow) 2020-03-03
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 63002:2016 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61000-4-11:2004 NOTE Harmonized as EN 61000-4-11:2004 (not modified).
IEC 62623 NOTE Harmonized as EN 62623.
IEC 62680-1-1 NOTE Harmonized as EN 62680-1-1.
IEC 62680-1-2 NOTE Harmonized as EN 62680-1-2.
IEC 62680-1-3 NOTE Harmonized as EN 62680-1-3.
IEC 62680-2-1 NOTE Harmonized as EN 62680-2-1.
1)
IEC 62680-3-1 NOTE Harmonized as EN 62680-3-1 .
IEC 62684 NOTE Harmonized as EN 62684.
1)
To be published.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60950-1 - Information technology equipment - EN 60950-1 -
Safety -
Part 1: General requirements
IEC 62368-1 - Audio/video, information and EN 62368-1 -
communication technology equipment -
Part 1: Safety requirements
IEC 62680-1-2 - Universal serial bus interfaces for data EN 62680-1-2 -
and power -
Part 1-2: Common components - USB
Power Delivery specification
IEC 62680-1-3 - Universal serial bus interfaces for data EN 62680-1-3 -
and power -
Part 1-3: Universal Serial Bus
interfaces - Common components - USB
Type-C™ cable and connector
specification
IEC 63002 ®
Edition 1.0 2016-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Identification and communication interoperability method for external power
supplies used with portable computing devices
Méthode d'identification et d'interopérabilité des communications des
alimentations externes utilisées avec les dispositifs informatiques portatifs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.020; 35.200 ISBN 978-2-8322-3648-2
– 2 – IEC 63002:2016 © IEC 2016
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references. 8
3 Terms, definitions and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Abbreviated terms . 9
4 Important characteristics of an external power supply . 9
4.1 General . 9
4.2 Positive identification of a unique EPS model . 9
4.3 Static characteristics of the external power supply performance and design . 10
4.3.1 General . 10
4.3.2 Load current step performance of the EPS . 10
4.3.3 Holdup time . 10
4.3.4 Limited power source (LPS) compliance . 11
4.3.5 Touch current . 11
4.3.6 Minimum capabilities for peak current and overcurrent protection . 11
4.3.7 Surface temperature of the enclosure of the EPS . 12
4.3.8 Overvoltage protection in the EPS . 12
Annex A (informative) Open issues related to arbitrary combinations of EPS and
portable computing device . 13
A.1 EMC, safety and performance . 13
A.2 Authentication, attestation, and data integrity protection . 13
A.3 Conducted noise from the EPS . 13
Annex B (informative) Considerations regarding EPS cable . 14
Annex C (informative) Recommended capabilities for EPS and legacy support . 15
Annex D (informative) Example usage scenarios of enhanced reporting from the EPS . 16
D.1 General . 16
D.2 Unique identification of the EPS . 16
D.3 Identification of voltage regulation, load current step and slew rate . 16
D.4 Load current step magnitude and slew rate capability . 16
D.5 Holdup time . 17
D.6 Low touch current reporting . 17
D.7 Peak current capability . 17
D.8 Surface temperature of the EPS . 17
Annex E (informative) Common charging interoperability use cases . 18
E.1 General . 18
E.2 Examples of device use cases . 18
E.2.1 Smartphone . 18
E.2.2 Higher power portable computing devices (tablets, notebook computers,
etc.) . 18
E.3 Examples of consumer use cases . 18
Annex F (informative) Conformance and market considerations . 20
F.1 General . 20
F.2 Summary of reported items and test references . 20
IEC 63002:2016 © IEC 2016 – 3 –
F.3 USB-IF Compliance Program . 21
F.4 General regulatory compliance for EPS . 21
F.5 Other considerations for system testing . 22
F.6 After-market firmware updates to EPS . 22
Bibliography . 23
Figure 1 – Scope of the identification and communication method . 7
Figure 2 – Measurement of holdup time . 11
Table F.1 – Summary of reported parameters from EPS to portable computing device . 20
Table F.2 – Examples of current regulations and standards in the US and EU
applicable to external power supplies used with portable computing devices (non-
exhaustive list) . 22
– 4 – IEC 63002:2016 © IEC 2016
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
IDENTIFICATION AND COMMUNICATION INTEROPERABILITY
METHOD FOR EXTERNAL POWER SUPPLIES USED
WITH PORTABLE COMPUTING DEVICES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.