EN 61995-2:2009/A1:2017

SLOVENSKI STANDARD
01-maj-2017
(OHPHQWL]DSULNOMXþLWHYVYHWLON]DJRVSRGLQMVWYDLQSRGREQHQDPHQHGHO/LVWL
VWDQGDUGD]D'&/,(&$
Devices for the connection of luminaires for household and similar purposes - Part 2:
Standard sheets for DCL (IEC 61995-2:2009/A1:2016)
Betriebsmittel für den Anschluss von Leuchten für Haushalt und ähnliche Zwecke - Teil
2: Normblätter für Betriebsmittel zum Anschluss einer Leuchte (IEC 61995-
2:2009/A1:2016)
Dispositifs de connexion pour luminaires pour usage domestique et analogue - Partie 2:
Feuilles de norme pour DCL (IEC 61995-2:2009/A1:2016)
Ta slovenski standard je istoveten z: EN 61995-2:2009/A1:2017
ICS:
29.120.20 Spojni elementi Connecting devices
29.140.40 Svetila Luminaires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61995-2:2009/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2017
ICS 29.120.20; 29.140.40
English Version
Devices for the connection of luminaires for household and
similar purposes - Part 2: Standard sheets for DCL
(IEC 61995-2:2009/A1:2016)
Dispositifs de connexion pour luminaires  Betriebsmittel für den Anschluss von Leuchten
pour usage domestique et analogue - für Haushalt und ähnliche Zwecke - Teil 2: Normblätter für
Partie 2: Feuilles de norme pour DCL Betriebsmittel zum Anschluss einer Leuchte
(IEC 61995-2:2009/A1:2016) (IEC 61995-2:2009/A1:2016)
This amendment A1 modifies the European Standard EN 61995-2:2009; it was approved by CENELEC on 2016-06-23. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61995-2:2009/A1:2017 E

European foreword
The text of document 23B/1207/FDIS, future IEC 61995-2:2009/A1, prepared by SC 23B "Plugs,
socket-outlets and switches", of IEC/TC 23 "Electrical accessories" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61995-2:2009/A1:2017.
The following dates are fixed:
(dop) 2017-08-10
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-02-10
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 61995-2:2009/A1:2016 was approved by CENELEC as a
European Standard without any modification.
Annex ZZ
(informative)
Relationship between this European Standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered
This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive “M/511” / ”Ref. Ares(2012) 1359213” to
provide one voluntary means of conforming to safety objectives of Directive 2014/35/EU of the
European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the
Member States relating to the making available on the market of electrical equipment designed for use
within certain voltage limits [2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 – Correspondence between this European Standard
and Annex I of Directive 2014/35/EU [2014 OJ L96]
Safety objectives of Clause(s) / sub-clause(s) Remarks / Notes
Directive 2014/35/EU of this EN
All All clauses of EN 61995-1 and ---
Clause 4
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
IEC 61995-2 ®
E
...