Universal Serial Bus interfaces for data and power - Part 1-2: Common components - USB Power Delivery Specification

IEC 62680-1-2:2018(E) defines a power delivery system covering all elements of a USB system including: Hosts, Devices, Hubs, Chargers and cable assemblies. This specification describes the architecture, protocols, power supply behavior, connectors and cabling necessary for managing power delivery over USB at up to 100W. This specification is intended to be fully compatible and extend the existing USB infrastructure. It is intended that this specification will allow system OEMs, power supply and peripheral developers adequate flexibility for product versatility and market differentiation without losing backwards compatibility. This third edition cancels and replaces the second edition published in 2017 and constitutes a technical revision. It is also identified as Version 1.1 + ECNs through 12 June 2017. Markup includes ECNs through 12-June-2017: - Add VPD Product Type - Specification Revision Interoperability - VCONN_Swap Clarification - Chapter 7 Source and Sink Behavior - Battery Numbering - Chunking Clarification - FR_Swap State Operation - GoodCRC Specification Revision - Slew Rate Exception for Source

Schnittstellen des Universellen Seriellen Busses für Daten und Energie – Teil 1-2: Gemeinsame Komponenten – Festlegung für die USB-Stromversorgung

Interfaces bus série universel (USB) pour les données et l’alimentation électrique - Partie 1-2: Composants communs - Spécification USB pour la fourniture de courant

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2. del: Skupne komponente - Specifikacija zagotavljanja napajanja prek USB (IEC 62680-1-2:2018)

Ta specifikacija je namenjena za uporabo kot dopolnilo obstoječih specifikacij [USB 2.0], [USB 3.1], [USB tipa C 1.2] in [USBBC 1.2]. Obravnava samo elemente, potrebne za zagotavljanje napajanja prek USB. Namenjena je za dobavitelje električne energije, proizvajalce platform, naprav in kabelskih sklopov [USB 2.0], [USB 3.1], [USB tipa C 1.2] in [USBBC 1.2].
Normativne informacije so podane za namene zagotavljanja interoperabilnosti sestavnih delov, izdelanih v skladu s to specifikacijo.
Informativne informacije (če so podane) ponazarjajo možne načine načrtovane uporabe.

General Information

Status
Withdrawn
Publication Date
07-Jun-2018
Withdrawal Date
16-May-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
16-Jan-2023
Completion Date
16-Jan-2023

Relations

Buy Standard

Standard
EN IEC 62680-1-2:2019 - BARVE
English language
601 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2019
1DGRPHãþD
SIST EN 62680-1-2:2018
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-2.
del: Skupne komponente - Specifikacija zagotavljanja napajanja prek USB (IEC
62680-1-2:2018)
Universal Serial Bus interfaces for data and power - Part 1-2: Common components -
USB Power Delivery Specification (IEC 62680-1-2:2018)
Schnittstellen des Universellen Seriellen Busses für Daten und Energie – Teil 1-2:
Gemeinsame Komponenten – Festlegung für die USB-Stromversorgung (IEC 62680-1-
2:2018)
Interfaces bus série universel (USB) pour les données et l'alimentation électrique - Partie
1-2: Composants communs - Spécification USB pour la fourniture de courant (IEC 62680
-1-2:2018)
Ta slovenski standard je istoveten z: EN IEC 62680-1-2:2018
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62680-1-2

NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 29.220, 33.120, 35.200 Supersedes EN 62680-1-2:2017
English Version
Universal Serial Bus interfaces for data and power - Part 1-2:
Common components - USB Power Delivery Specification
(IEC 62680-1-2:2018)
Interfaces bus série universel (USB) pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 1-2: Composants communs und Energie - Teil 1-2: Gemeinsame Komponenten -
- Spécification USB pour la fourniture de courant Festlegung für die USB-Stromversorgung
(IEC 62680-1-2:2018) (IEC 62680-1-2:2018)
This European Standard was approved by CENELEC on 2018-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62680-1-2:2018 E

European foreword
The text of document 100/2968/CDV, future edition 3 of IEC 62680-1-2, prepared by technical area
14: "Interfaces and methods of measurement for personal computing equipment", of IEC/TC 100:
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62680-1-2:2018.

The following dates are fixed:
(dop) 2019-02-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-17
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62680-1-2:2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62680-1-2:2018 was approved by CENELEC as a
European Standard without any modification.
IEC 62680-1-2 ®
Edition 3.0 2018-04
INTERNATIONAL
STANDARD
colour
inside
Universal serial bus interfaces for data and power –

Part 1-2: Common components – USB Power Delivery specification

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-5581-0

– 2 – IEC 62680-1-2:2018 © IEC 2018
© USB-IF:2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER –

Part 1-2: Common components – USB Power Delivery specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,
IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to
the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of,
or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-2 has been prepared by technical area 14: Interfaces and methods
of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
This third edition cancels and replaces the second edition published in 2017 and constitutes a technical
revision.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The structure and
editorial rules used in this publication reflect the practice of the organization which submitted it.

IEC 62680-1-2:2018 © IEC 2018 – 3 –
© USB-IF:2017
The text of this International Standard is based on the following documents:
CDV Report on voting
100/2968/CDV 100/3045/RVC
Full information on the voting for the approval of this International Standard can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this document will remain unchanged until the stability
date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific
document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates that it
contains colours which are considered to be useful for the correct understanding of its
contents. Users should therefore print this document using a colour printer.

– 4 – IEC 62680-1-2:2018 © IEC 2018
© USB-IF:2017
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the USB
Implementers Forum (USB-IF). These specifications were submitted to the IEC under the auspices of a
special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication USB Power Delivery Specification Revision 3.0 V.1.1 and ECNs
through 12 June 2017.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a
support organization and forum for the advancement and adoption of Universal Serial Bus technology.
The Forum facilitates the development of high-quality compatible USB peripherals (devices), and
promotes the benefits of USB and the quality of products that have passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR
FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE
AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR
INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR IMPLEMENTATION OR
INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in a
reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please see:
http://www.usb.org/developers/docs/
http://www.usb.org/developers/devclass_docs#approved
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO
ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.”

IEC 62680-1-2:2018 © IEC 2018 – 5 –
© USB-IF:2017
Universal Serial Bus
Power Delivery Specification
Revision:  3.0
Version:  1.1+ ECNs through 12 June 2017
Release date: 12 January 2017
– 6 – IEC 62680-1-2:2018 © IEC 2018
© USB-IF:2017
Editors
Bob Dunstan Renesas Electronics Corp.
Richard Petrie DisplayLink
Contributors
Charles Wang ACON, Advanced-Connectek, Inc.
Conrad Choy ACON, Advanced-Connectek, Inc.
Steve Sedio ACON, Advanced-Connectek, Inc.
Vicky Chuang ACON, Advanced-Connectek, Inc.

Joseph Scanlon Advanced Micro Devices

Caspar Lin Allion Labs, Inc.
Casper Lee Allion Labs, Inc.
Howard Chang Allion Labs, Inc.
Greg Stewart Analogix Semiconductor, Inc.

Mehran Badii Analogix Semiconductor, Inc.

Bill Cornelius Apple
Colin Whitby-Strevens Apple
Corey Axelowitz Apple
Corey Lange Apple
Dave Conroy Apple
David Sekowski Apple
Girault Jones Apple
James Orr Apple
Jason Chung Apple
Jennifer Tsai Apple
Karl Bowers Apple
Keith Porthouse Apple
Matt Mora Apple
Paul Baker Apple
Reese Schreiber Apple
Sameer Kelkar Apple
Sasha Tietz Apple
Scott Jackson Apple
Sree Raman Apple
William Ferry Apple
Zaki Moussaoui Apple
Bernard Shyu Bizlink Technology, Inc.
Eric Wu Bizlink Technology, Inc.
Morphy Hsieh Bizlink Technology, Inc.

Shawn Meng Bizlink Technology Inc.
Tiffany Hsiao Bizlink Technology, Inc.
Weichung Ooi Bizlink Technology, Inc.
Michal Staworko Cadence Design Systems, Inc.

IEC 62680-1-2:2018 © IEC 2018 – 7 –
© USB-IF:2017
Alessandro Ingrassia Canova Tech

Andrea Colognese Canova Tech
Davide Ghedin Canova Tech
Matteo Casalin Canova Tech
Nicola Scantamburlo Canova Tech
Yi-Feng Lin Canyon Semiconductor
YuHung Lin Canyon Semiconductor

Anup Nayak Cypress Semiconductor
Jagadeesan Raj Cypress Semiconductor
Pradeep Bajpai Cypress Semiconductor

Rushil Kadakia Cypress Semiconductor

Steven Wong Cypress Semiconductor

Subu Sankaran Cypress Semiconductor
Sumeet Gupta Cypress Semiconductor
Venkat Mandagulathar Cypress Semiconductor

Adolfo Montero Dell Inc.
Bruce Montag Dell Inc.
Gary Verdun Dell Inc.
Merl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.