prEN IEC 60730-2-13:2024

SLOVENSKI STANDARD
01-september-2024
Avtomatske električne krmilne naprave - 2-13. del: Posebne zahteve za zaznavala
(senzorje) vlage
Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing
controls
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche
Anwendungen - Teil 2-13: Besondere Anforderungen an feuchtigkeitsempfindliche
Regel- und Steuergeräte
Dispositifs de commande électrique automatiques - Partie 2-13: Exigences particulières
pour les dispositifs de commande sensibles à l'humidité
Ta slovenski standard je istoveten z: prEN IEC 60730-2-13:2024
ICS:
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

72/1432/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60730-2-13 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-06-28 2024-09-20
SUPERSEDES DOCUMENTS:
72/1426/RR
TC 72 : AUTOMATIC ELECTRICAL CONTROLS
IEC
SECRETARIAT: SECRETARY:
United States of America Ms Grace Roh
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls

PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC CDV 60730-2-13 ED4 © 2024 -2- 72/1432/CDV

1 CONTENTS
2 CONTENTS . 1
3 1 Scope . 7
4 2 Normative references . 8
5 3 Terms and definitions . 8
6 3.2 Definitions of types of control according to purpose . 8
7 4 General . 8
8 5 Required technical information . 8
9 6 Protection against electric shock . 8
10 7 Provision for protective earthing . 8
11 8 Terminals and terminations . 9
12 9 Constructional requirements . 9
13 10 Threaded parts and connections . 9
14 11 Creepage distances, clearances and distances through solid insulation . 9
15 12 Components . 9
16 13 Fault assessment on electronic circuits. 9
17 13.1 Fault assessment for inherent safety . 9
18 14 Moisture and dust resistance . 9
19 15 Electric strength and insulation resistance . 9
20 16 Heating . 10
21 17 Manufacturing deviation and drift . 10
22 18 Environmental stress . 10
23 19 Endurance . 10
24 19.1 General requirements . 10
25 19.8 Test of automatic action at accelerated rate . 10
26 19.15 Test for particular purpose controls . 10
27 20 Mechanical strength . 10
28 21 Resistance to heat, fire and tracking . 10
29 22 Resistance to corrosion . 11
30 23 Electromagnetic compatibility (EMC) requirements – Emission . 11
31 24 Normal operation . 11
32 25 Electromagnetic compatibility (EMC) requirements – Immunity . 11
33 26 Abnormal operation tests . 11
34 Annex H (normative) Requirements related to functional safety . 12
35 H.3 Terms and definitions . 12
36 H.5 Information . 12
37 H.9 Constructional requirements . 12
38 H.13 Fault assessment on electronic circuits . 13
39 H.17 Manufacturing deviation and drift . 14
40 H.25 Electromagnetic compatibility (EMC) requirements – Immunity . 15
41 Annex R (informative) National differences relevant in the United States of America . 22
42 Annex S (informative) National differences relevant in Japan . 23
43 S.25 Normative references . 23
44 Annex T (informative) National differences relevant in Canada . 24

IEC CDV 60730-2-13 ED4 © 2024 -3- 72/1432/CDV

45 T.2 Normative references . 24
46 Annex AA (normative) Independently mounted and in-line cord controls . 25
47 Bibliography . 26
49 Table H.1 – Additional items to Table 1 . 12
50 Table R.1 – Minimum number of cycles for independently mounted and in-line cord
51 controls (United States) . 22
52 Table T.2 – Minimum number of cycles for independently mounted and in-line cord
53 controls (Canada) . 24
54 Table AA.1 – Number of cycles . 25
IEC CDV 60730-2-13 ED4 © 2024 -4- 72/1432/CDV

57 INTERNATIONAL ELECTROTECHNICAL COMMISSION
58 ____________
60 AUTOMATIC ELECTRICAL CONTROLS –
62 Part 2-13: Particular requirements for humidity sensing controls
64 FOREWORD
65 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
66 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
67 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
68 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
69 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
70 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
71 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
72 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
73 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
74 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
75 consensus of opinion on the relevant subjects since each technical committee has representation from all
76 interested IEC National Committees.
77 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
78 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
79 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
80 misinterpretation by any end user.
81 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
82 transparently to the maximum extent possible in their national and regional publications. Any divergence between
83 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
84 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
85 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
86 services carried out by independent certification bodies.
87 6) All users should ensure that they have the latest edition of this publication.
88 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
89 members of its technical committees and IEC National Committees for any personal injury, property damage or
90 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
91 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
92 Publications.
93 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
94 indispensable for the correct application of this publication.
95 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
96 rights. IEC shall not be held responsible for identifying any or all such patent rights.
97 IEC 60730-2-13 has been prepared by IEC technical committee 72: AUTOMATIC ELECTRICAL
98 CONTROLS. It is an International Standard.
99 This 4.0 edition cancels and replaces the 3.0 edition published in 2019-05. This edition
100 constitutes a technical revision.
101 This edition includes the following significant technical changes with respect to the previous
102 edition:
103 .;
104 a) adoption to IEC 60730-1 Ed.6.0 with all of its significant changes to IEC 60730-1 Ed.5.1,

IEC CDV 60730-2-13 ED4 © 2024 -5- 72/1432/CDV

105 The text of this International Standard is based on the following documents:
Draft Report on voting
XX/XX/FDIS XX/XX/RVD
107 Full information on the voting for its approval can be found in the report on voting indicated in
108 the above table.
109 The language used for the development of this International Standard is English.
110 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
111 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
112 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
113 described in greater detail at www.iec.ch/publications.
114 A list of all parts of the IEC 60730 series, under the general title: AUTOMATIC ELECTRICAL
115 CONTROL, can be found on the IEC website.
116 This part 2-13 is intended to be used in conjunction with IEC 60730-1. It was established on the
117 basis of the sixth edition of that standard (2022. Consideration may be given to future editions
118 of, or amendments to, IEC 60730-1.
119 This part 2-13 supplements or mod
...