Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors

IEC 60384-19:2015 is applicable to fixed surface mount capacitors for direct current, with metallized electrodes and polyethylene-terephthalate dielectric for use in electronic equipment. These capacitors have metallized connecting pads or soldering strips and are intended to be mounted directly onto substrates for hybrid circuits or onto printed boards. These capacitors may have "self-healing properties" depending on conditions of use. They are primarily intended for applications where the a.c. component is small with respect to the rated voltage. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384 14. This edition includes the following significant technical changes with respect to the previous edition: a) Revised all parts of the document based on the IEC Directives Part 2:2011 (sixth edition) to the extent practicable, and harmonization between other similar kind of documents. b) Revised tables and Clause 4 so as to prevent duplications and contradictions.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 19: Rahmenspezifikation - Oberflächenmontierbare Gleichspannungs-Kondensatoren mit metallisierter Polyethylen-Terephtalat-Folie als Dielektrikum

Condensateurs fixes utilisés dans les équipements électroniques - Partie 19: Spécification intermédiaire: Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène téréphtalate métallisé

L'IEC 60384-19:2015 s'applique aux condensateurs fixes pour courant continu à électrodes métallisées et à diélectrique en polyéthylène téréphtalate destinés aux équipements électroniques. Ces condensateurs sont équipés de contacts de connexion métallisés ou de bandes de brasure et sont destinés à être montés directement sur des substrats pour circuits hybrides ou sur des cartes imprimées. Ces condensateurs peuvent avoir des propriétés "autocicatrisantes" en fonction des conditions d'utilisation. Ils sont principalement destinés à des applications dans lesquelles la composante alternative est petite par rapport à la tension assignée. Les condensateurs d'antiparasitage ne sont pas inclus, mais ils sont couverts par l'IEC 60384-14. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) Révision de toutes les parties du document en se basant sur les Directives IEC, Partie 2 (sixième édition, 2011), dans la mesure du possible, et sur l'harmonisation d'autres types de documents. b) Révision des tableaux et de l'Article 4 pour éviter les duplications et les contradictions.

Nespremenljivi kondenzatorji za elektronsko opremo - 19. del: Področna specifikacija - Nespremenljivi kondenzatorji za enosmerni tok za površinsko montažo s pokovinjenim polietilen-tereftalatnim dielektrikom

Ta del standarda IEC 60384 se uporablja za pritrjene kondenzatorje za površinsko namestitev za enosmerne napetosti z metaliziranimi elektrodami in polietilenskim tereftalatnim dielektrikom za uporabo v elektronski opremi. Ti kondenzatorji imajo metalizirane priključne blazinice ali varilne trakove ter so namenjeni namestitvi neposredno na podloge za hibridne tokokroge ali na tiskana vezja. Ti kondenzatorji imajo lahko »samoozdravljive lastnosti«, odvisno od pogojev uporabe. Namenjeni so predvsem uporabam, pri katerih je izmenična komponenta majhna glede na nazivno napetost.
Kondenzatorji za preprečevanje elektromagnetnih motenj niso vključeni, vendar so zajeti v standardu IEC 60384-14.

General Information

Status
Published
Publication Date
03-Dec-2015
Withdrawal Date
19-May-2018
Technical Committee
Drafting Committee
Current Stage
6060 - Document made available - Publishing
Start Date
04-Dec-2015
Completion Date
04-Dec-2015

Relations

Buy Standard

Standard
EN 60384-19:2016
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.URþQDSRYUãLQVNRFixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN 60384-19:2015SIST EN 60384-19:2016en01-marec-2016SIST EN 60384-19:2016SLOVENSKI
STANDARDSIST EN 60384-19:20061DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60384-19
December 2015 ICS 31.060.30
Supersedes
EN 60384-19:2006
English Version
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2015)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 19: Spécification intermédiaire: Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène téréphtalate métallisé (IEC 60384-19:2015)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 19: Rahmenspezifikation - Oberflächenmontierbare Gleichspannungs-Kondensatoren mit metallisierter Polyethylen-Terephtalat-Folie als Dielektrikum (IEC 60384-19:2015) This European Standard was approved by CENELEC on 2015-05-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-19:2015 E SIST EN 60384-19:2016

European foreword The text of document 40/2342/FDIS, future edition 3 of IEC 60384-19, prepared by IEC/TC 40 "Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60384-19:2015.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-04 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-05-20
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60384-19:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068 series NOTE
Harmonized in EN 60068 series. IEC 60384-19-1 NOTE
Harmonized in EN 60384-19-1. SIST EN 60384-19:2016

Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60062 -
Marking codes for resistors and capacitors EN 60062 -
+ corrigendum
IEC 60063 -
Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013
Environmental testing -- Part 1: General and guidance EN 60068-1 2014
IEC 60384-1 2008
Fixed capacitors for use in electronic equipment -- Part 1: Generic specification EN 60384-1 2009
IEC 61193-2 2007
Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 2007
ISO 3 -
Preferred numbers; Series of preferred numbers - -
IEC 60384-19 Edition 3.0 2015-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –
Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate
film dielectric surface mount d.c. capacitors
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 19: Spécification intermédiaire: Condensateurs fixes pour montage en surface pour courant continu à diélectrique en film de polyéthylène téréphtalate métallisé
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 31.060.30
ISBN 978-2-8322-2596-7
– 2 – IEC 60384-19:2015  IEC 2015
CONTENTS FOREWORD . 5 1 General . 7 1.1 Scope . 7 1.2 Object . 7 1.3 Normative references . 7 1.4 Information to be given in a detail specification . 8 1.4.1 General . 8 1.4.2 Outline drawing and dimensions . 8 1.4.3 Mounting . 8 1.4.4 Ratings and characteristics . 8 1.4.5 Marking . 9 1.5 Terms and definitions . 9 1.6 Marking . 9 1.6.1 General . 9 1.6.2 Information for marking . 9 1.6.3 Marking of capacitors . 9 1.6.4 Marking on packaging . 10 2 Preferred ratings and characteristics . 10 2.1 Preferred characteristics . 10 2.1.1 Preferred climatic categories . 10 2.2 Preferred values of ratings . 10 2.2.1 Nominal capacitance (CN) . 10 2.2.2 Tolerance on nominal capacitance . 10 2.2.3 Rated voltage (UR) . 10 2.2.4 Category voltage (UC) . 11 2.2.5 Rated temperature . 11 3 Quality assessment procedures . 11 3.1 Primary stage of manufacture . 11 3.2 Structurally similar components . 11 3.3 Certified test records of released lots . 11 3.4 Qualification approval procedures . 11 3.4.1 General . 11 3.4.2 Qualification approval on the basis of the fixed sample size procedure . 11 3.5 Quality conformance inspection . 19 3.5.1 Formation of inspection lots . 19 3.5.2 Test schedule . 20 3.5.3 Delayed delivery . 20 3.5.4 Assessment levels . 20 4 Test and measurement procedures . 21 4.1 Mounting . 21 4.2 Visual examination and check of dimensions . 21 4.2.1 General . 21 4.2.2 Visual examination and check of dimensions . 21 4.2.3 Requirements . 21 4.3 Electrical tests . 21 4.3.1 Voltage proof . 21 SIST EN 60384-19:2016

IEC 60384-19:2015  IEC 2015 – 3 –
4.3.2 Capacitance . 22 4.3.3 Tangent of loss angle (tan δ) . 22 4.3.4 Insulation resistance . 23 4.4 Shear test . 24 4.5 Substrate bending test . 25 4.5.1 General . 25 4.5.2 Initial inspections . 25 4.5.3 Final inspections and requirements . 25 4.6 Resistance to soldering heat . 25 4.6.1 General . 25 4.6.2 Initial inspections . 25 4.6.3 Test conditions . 25 4.6.4 Recovery . 25 4.6.5 Final inspections and requirements . 25 4.7 Solderability . 25 4.7.1 General . 25 4.7.2 Test conditions . 26 4.7.3 Final inspections and requirements . 26 4.8 Rapid change of temperature . 26 4.8.1 General . 26 4.8.2 Initial inspections . 26 4.8.3 Test conditions . 26 4.8.4 Final inspections and requirements . 26 4.9 Climatic sequence. 26 4.9.1 General . 26 4.9.2 Initial inspections .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.