iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61760-2:1998

(Main)

Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

Describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble free processing of surface mounting devices, both active and passive. The object of this International Standard is to ensure that users of SMDs receive and store products that can be further processed without prejudice to quality and reliability.

Oberflächenmontagetechnik - Teil 2: Transport- und Lagerungsbedingungen von oberflächenmontierbaren Bauelementen (SMD) - Anwendungsleitfaden

Technique du montage en surface - Partie 2: Transport et stockage des composants pour montage en surface (CSM) - Guide d'application

Décrit les conditions de transport et de stockage qui sont prises en compte afin de permettre la mise en oeuvre sans problème des composants pour montage en surface (CMS), tant actifs que passifs. L'objet de cette Norme internationale est de s'assurer que l'utilisateur de composants pour montage en surface reçoit et emmagasine des produits qui pourront être utilisés sans problème de qualité et de fiabilité.

Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

General Information

Status
Withdrawn
Publication Date
21-Apr-1998
ICS
31.020 - Electronic components in general
Technical Committee
CLC/SR 91 - Electronics assembly technology
Drafting Committee
IEC/TC 91 - IEC_TC_91
Parallel Committee
IEC/TC 91 - IEC_TC_91
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-May-2010
Ref Project
SIST EN 61760-2:2001 - Surface mounting technology -- Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

Relations

Replaced By
EN 61760-2:2007 - Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
Effective Date
29-Jan-2023

Buy Standard

EN 61760-2:2001EN 61760-2:2001
PreviousNext
Standard
EN 61760-2:2001
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61760-2:2001
01-marec-2001
Surface mounting technology - Part 2: Transportation and storage conditions of
surface mounting devices (SMD) - Application guide
Surface mounting technology -- Part 2: Transportation and storage conditions of surface
mounting devices (SMD) - Application guide
Oberflächenmontagetechnik -- Teil 2: Transport- und Lagerungsbedingungen von
oberflächenmontierbaren Bauelementen (SMD) - Anwendungsleitfaden
Technique du montage en surface -- Partie 2: Transport et stockage des composants
pour montage en surface (CSM) - Guide d'application
Ta slovenski standard je istoveten z: EN 61760-2:1998
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
SIST EN 61760-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61760-2:2021(Main)
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
SIST EN IEC 61760-2:2021

This International Standard describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble-free processing of surface mounting devices, both active and passive. (Conditions for printed boards are not taken into consideration.) The object of this standard is to ensure that users of SMDs receive and store products tha can be further processed (e.g. positioned, soldered) without prejudice to quality and reliability. Improper transportation and storage of SMDs may cause deterioration and result in assembly problems such as poor solderability, delamination and "popcorning".

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61760-2:2007(Main)
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
SIST EN 61760-2:2007

IEC 61760-2:2007 describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble-free processing of surface mounting devices, both active and passive (Conditions for printed boards are not taken into consideration). The object of this standard is to ensure that users of SMDs receive and store products that can be further processed (e.g. positioned, soldered) without prejudice to quality and reliability. Improper transportation and storage of SMDs may cause deterioration and result in assembly problems such as poor solderability, delamination and 'popcorning'. This second edition cancels and replaces the first edition, published in 1998, and constitutes a technical revision. The standard was updated and editorially revised.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60286-2:2022(Main)
Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
SIST EN IEC 60286-2:2023

IEC 60286-2:2022 applies to the tape packaging of components with two or more unidirectional leads for use in electronic equipment. It provides dimensions and tolerances necessary to tape components with unidirectional leads. In general, the tape is applied to the component leads. It covers requirements for taping techniques used with equipment for automatic handling, pre-forming of leads, insertion and other operations and includes only those dimensions which are essential to the taping of components intended for the above-mentioned purposes. This edition includes the following significant technical changes with respect to the previous edition: a) complete revision of structure; b) consolidation of essential parameters and requirements in Clause 4.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60286-3:2022(Main)
Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
SIST EN IEC 60286-3:2023

This part of IEC 60286 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die and bumped die (flip chips).

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63203-402-1:2022(Main)
Wearable electronic devices and technologies - Part 402-1: Performance measurement of fitness wearables - Test methods of glove-type motion sensors for measuring finger movements
SIST EN IEC 63203-402-1:2023

IEC 63203-402-1:2022 specifies test methods for wearable glove-type motion sensors to measure finger movements. The measurement methods include goniometric parameters related to the finger postures and flexion dynamics. Glove-type motion sensors are the type of gloves considered within the scope of this document for testing and measurement. This document describes direct and indirect measurement methods. In the direct measurement method, the angles of the joints of each finger are directly measured by a goniometer. The indirect method uses a measurement device such as a servomotor-based angle-measuring device. This document is applicable to angle measurement of all gloves with glove-type motion sensors without limitation of the device technology or size.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50419:2022(Main)
Marking of electrical and electronic equipment (EEE) in respect to separate collection of waste EEE (WEEE)
SIST EN 50419:2022

This document specifies a marking — of electrical and electronic equipment (EEE) with a view to minimizing the disposal of waste EEE (WEEE) as unsorted waste and to facilitating its separate collection. NOTE 1 This is in accordance with Article 14(4) of Directive 2012/19/EU (WEEE, recast) — that serves to clearly identify the producer of the equipment and — that the equipment has been put on the market after 13 August 2005. NOTE 2 This is in accordance with Articles 12(3) and 15(2) of Directive 2012/19/EU (WEEE, recast) — that applies to categories of electrical and electronic equipment subject to WEEE collection, treatment, recovery and environmentally sound disposal as defined by European and national regulations, provided the equipment concerned is not part of another type of equipment that does not fall within the scope of above mentioned regulations. NOTE 3 This is in accordance with Article 2 and Annexes I – IV of Directive 2012/19/EU (WEEE, recast) [1] The definition of a technical carrier medium for machine based identifying the producer, such as a barcode, electronic data medium or microchip, is not covered by this document.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63203-406-1:2022(Main)
Wearable electronic devices and technologies - Part 406-1: Test method for measuring surface temperature of wrist-worn wearable electronic devices while in contact with human skin
SIST EN IEC 63203-406-1:2022

This part of IEC 63203 defines the terms, definitions, symbols, configurations, and test methods to be used to specify the standard measurement conditions and methods for determining the contact-surface temperature of wrist-worn wearable electronic devices intended to be worn directly on a human wrist and that can be worn continuously during use. The conditions of the test do not consider perfusion and results are therefore considered conservatively. The temperature increase is induced by the thermal energy of wearable electronic devices during operation. This document gives the general procedure for the test method applicable to various wrist-worn wearable electronic devices for use by ordinary persons which in the context of this document is a healthy human adult.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62435-9:2021(Main)
Electronic components - Long-term storage of electronic semiconductor devices - Part 9: Special cases
SIST EN IEC 62435-9:2021

IEC 62435-9:2021 specifies storage practices encompassing silicon and semiconductor device building blocks of all types that are integrated together to into products in the form of either packages or boards that can be stored as fully assembled units or partial assemblies. Special attention is given to memories as components and assemblies although methods also apply to heterogeneous components. Guidelines and requirements for customer-supplier interaction are provided to manage the complexity. NOTE In IEC 62435 (all parts), the term "components" is used interchangeably with dice, wafers, passives and packaged devices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61760-2:2021(Main)
Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
SIST EN IEC 61760-2:2021

This International Standard describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble-free processing of surface mounting devices, both active and passive. (Conditions for printed boards are not taken into consideration.) The object of this standard is to ensure that users of SMDs receive and store products tha can be further processed (e.g. positioned, soldered) without prejudice to quality and reliability. Improper transportation and storage of SMDs may cause deterioration and result in assembly problems such as poor solderability, delamination and "popcorning".

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60938-2:2021(Main)
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification on power line chokes
SIST EN IEC 60938-2:2021

This part of IEC 60938 applies to fixed inductors designed for electromagnetic interference suppression, which will be connected to an AC mains or other supply with a nominal voltage not exceeding 1 000 V AC RMS or 1 500 V DC with a nominal frequency not exceeding 400 Hz. This sectional specification is restricted to fixed inductors for which safety tests are appropriate. This implies that inductors specified according to this specification will either be connected to mains supplies, when compliance with the mandatory tests of Annex A is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. The object of this document is to prescribe standard requirements for safety tests, preferred ratings and characteristics, to select from IEC 60938-1 the appropriate methods of test and to give general performance requirements for suppression inductors.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day