Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

Describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble free processing of surface mounting devices, both active and passive. The object of this International Standard is to ensure that users of SMDs receive and store products that can be further processed without prejudice to quality and reliability.

Oberflächenmontagetechnik - Teil 2: Transport- und Lagerungsbedingungen von oberflächenmontierbaren Bauelementen (SMD) - Anwendungsleitfaden

Technique du montage en surface - Partie 2: Transport et stockage des composants pour montage en surface (CSM) - Guide d'application

Décrit les conditions de transport et de stockage qui sont prises en compte afin de permettre la mise en oeuvre sans problème des composants pour montage en surface (CMS), tant actifs que passifs. L'objet de cette Norme internationale est de s'assurer que l'utilisateur de composants pour montage en surface reçoit et emmagasine des produits qui pourront être utilisés sans problème de qualité et de fiabilité.

Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

General Information

Status
Withdrawn
Publication Date
09-Feb-2026
ICS
31.020 - Electronic components in general
Technical Committee
CLC/SR 91 - Electronics assembly technology
Drafting Committee
IEC/TC 91 - IEC_TC_91
Parallel Committee
IEC/TC 91 - IEC_TC_91
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-May-2010
Completion Date
10-Feb-2026
Ref Project
SIST EN 61760-2:2001 - Surface mounting technology -- Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide

Relations

Replaced By
EN 61760-2:2007 - Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide
Effective Date
29-Jan-2023
Refers
EN 60721-3-2:1997 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
Effective Date
03-Feb-2026
Refers
EN 60286-5:1997 - Packaging of components for automatic handling - Part 5: Matrix trays
Effective Date
03-Feb-2026
Refers
EN 60721-3-1:1997 - Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage
Effective Date
03-Feb-2026
Referred By
EN 61191-1:1998 - Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies
Effective Date
03-Feb-2026
Referred By
EN 61192-1:2003 - Workmanship requirements for soldered electronic assemblies - Part 1: General
Effective Date
03-Feb-2026
Referred By
EN 61760-1:2006 - Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
Effective Date
03-Feb-2026

Frequently Asked Questions

EN 61760-2:1998 is a standard published by CLC. Its full title is "Surface mounting technology - Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide". This standard covers: Describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble free processing of surface mounting devices, both active and passive. The object of this International Standard is to ensure that users of SMDs receive and store products that can be further processed without prejudice to quality and reliability.

Describes the transportation and storage conditions for surface mounting devices (SMDs) that are fulfilled in order to enable trouble free processing of surface mounting devices, both active and passive. The object of this International Standard is to ensure that users of SMDs receive and store products that can be further processed without prejudice to quality and reliability.

EN 61760-2:1998 is classified under the following ICS (International Classification for Standards) categories: 31.020 - Electronic components in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 61760-2:1998 has the following relationships with other standards: It is inter standard links to EN 61760-2:2007, EN 60721-3-2:1997, EN 60286-5:1997, EN 60721-3-1:1997, EN 61191-1:1998, EN 61192-1:2003, EN 61760-1:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 61760-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2001
Surface mounting technology - Part 2: Transportation and storage conditions of
surface mounting devices (SMD) - Application guide
Surface mounting technology -- Part 2: Transportation and storage conditions of surface
mounting devices (SMD) - Application guide
Oberflächenmontagetechnik -- Teil 2: Transport- und Lagerungsbedingungen von
oberflächenmontierbaren Bauelementen (SMD) - Anwendungsleitfaden
Technique du montage en surface -- Partie 2: Transport et stockage des composants
pour montage en surface (CSM) - Guide d'application
Ta slovenski standard je istoveten z: EN 61760-2:1998
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...