prEN IEC 62196-2:2024

SLOVENSKI STANDARD
01-junij-2024
Vtiči, vtičnice, konektorji in uvodnice na vozilih - Kabelsko napajanje električnih
vozil - 2. del: Zahteve za dimenzijsko skladnost pribora s trni in cevastimi kontakti
za izmenični tok (AC)
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of
electric vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-
tube accessories
Stecker, Steckdosen, Fahrzeugkupplungen und Fahrzeugstecker - Konduktives Laden
von Elektrofahrzeugen - Teil 2: Maßliche Kompatibilitätsanforderungen an
Wechselspannungssteckvorrichtungen mit Stiften und Buchsen
Fiches, socles de prise de courant, prises mobiles de véhicule et socles de connecteurs
de véhicules - Charge conductive des véhicules électriques - Partie 2: Exigences
dimensionnelles de compatibilité pour les appareils à broches et alvéoles pour courant
alternatif
Ta slovenski standard je istoveten z: prEN IEC 62196-2:2024
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
43.120 Električna cestna vozila Electric road vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

23H/552/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62196-2 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-04-05 2024-06-28
SUPERSEDES DOCUMENTS:
23H/536/CD, 23H/545A/CC
IEC SC 23H : PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL AND SIMILAR APPLICATIONS, AND FOR ELECTRIC
VEHICLES
SECRETARIAT: SECRETARY:
France Mrs Anne Le Guennec
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TC 69
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is
the final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric
vehicles - Part 2: Dimensional compatibility requirements for AC pin and contact-tube
accessories
PROPOSED STABILITY DATE: 2030
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.

IEC CDV 62196-2 © IEC 2024 2 23H/552/CDV

1 CONTENTS
3 FOREWORD . 4
4 INTRODUCTION . 6
5 1 Scope . 7
6 2 Normative references . 7
7 3 Terms and definitions . 7
8 4 General . 8
9 5 Ratings . 8
10 5.1 Rated operating voltage ranges . 8
11 5.2 Rated currents . 8
12 5.2.1 General . 8
13 6 Connection between the power supply and the electric vehicle . 8
14 6.1 Interfaces . 8
15 6.2 Basic interface . 9
16 6.3 DC Interface . 10
17 6.4 Combined interface . 10
18 6.201 Communication and control pilot function . 10
19 7 Classification of accessories . 10
20 7.4 According to electrical operation . 10
21 7.5 According to interface . 11
22 7.201 According to the standard sheet used . 11
23 8 Marking . 11
24 9 Dimensions. 11
25 9.201 Standard sheets . 11
26 10 Protection against electric shock . 12
27 11 Size and colour of protective earthing and neutral conductors . 12
28 12 Provisions for earthing . 12
29 13 Terminals . 12
30 13.201 13
31 14 Interlocks . 13
32 14.201 Achieve and release the latching device (configurations without a retaining
33 means that are not suitable for making and breaking under load) . 13
34 14.201.1 General . 13
35 14.201.2 Samples . 13
36 14.201.3 Test Sequence . 13
37 15 Resistance to ageing of rubber and thermoplastic material . 17
38 16 General construction . 17
39 17 Construction of EV socket-outlets – General . 17
40 18 Construction of EV plugs and vehicle connectors . 17
41 19 Construction of vehicle inlets . 17
42 20 Degrees of protection . 17
43 21 Insulation resistance and dielectric strength . 17
44 22 Breaking capacity . 18
45 23 Normal operation . 18
46 24 Temperature rise . 18

IEC CDV 62196-2 © IEC 2024 3 23H/552/CDV

47 24.1 Addition: . 18
48 25 Flexible cables and their connection . 18
49 26 Mechanical strength . 18
50 27 Screws, current-carrying parts and connections . 18
51 28 Creepage distances, clearances and distances through sealing compound . 18
52 29 Resistance to heat and to fire . 18
53 30 Corrosion and resistance to rusting . 18
54 31 Conditional short-circuit current . 18
55 32 Electromagnetic compatibility (EMC) . 18
56 33 Vehicle drive over . 19
57 33.3 Not applicable. . 19
58 33.4 Not applicable. . 19
59 34 Thermal cycling . 19
60 35 Humidity exposure . 19
61 36 Misalignment . 19
62 37 Contact endurance test . 19
63 201 Resistor coding . 19
64 STANDARD SHEETS . 20
65 CONFIGURATION TYPE 1 . 20
66 CONFIGURATION TYPE 2 . 30
67 CONFIGURATION TYPE 3 . 47
68 Annex A A Standard Sheets for Test gauges in 14.1.9 . 72
69 Annex B B (informative) EV accessories directly connected to printed circuit boards
70 (PCBs) . 73
71 Bibliography . 74
73 Table 201 – Overview of the basic vehicle interface, configuration type 1, single phase . 9
74 Table 202 – Overview of the basic vehicle interface, configuration types 2, 3 and 4,
75 three phase or single phase . 10
76 Table 203 – Configuration types and standard sheets . 12
77 Table 204 – Definition of interlock test numbers for . 15
78 checking latched position and unlatched position . 15
79 Table 204 – Interoperation of configuration type 2 accessories . 30
IEC CDV 62196-2 © IEC 2024 4 23H/552/CDV

82 INTERNATIONAL ELECTROTECHNICAL COMMISSION
83 ____________
85 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE
86 INLETS – CONDUCTIVE CHARGING OF ELECTRIC VEHICLES –
88 Part 2: Dimensional compatibility requirements
89 for AC pin and contact-tube accessories
91 FOREWORD
92 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
93 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
94 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
95 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
96 Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
97 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
98 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
99 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
100 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
101 2) The formal de
...