iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 131-1:2015/FprA1:2019

(Amendment)

Ladders - Part 1: Terms, types, functional sizes

Ladders - Part 1: Terms, types, functional sizes

This European Standard defines terms and specifies the general design characteristics of ladders.
It applies to portable ladders.
It does not apply to ladders designed for specific professional use such as fire brigade ladders, roof ladders and mobile ladders.
NOTE 1   For multiple hinge joint ladders EN 131-4 applies.
NOTE 2   For telescopic ladders EN 131-6 applies.
NOTE 3   For mobile ladders with platforms EN 131-7 applies.
NOTE 4   This standard does not apply to step stools for which EN 14183 applies.

Leitern - Teil 1: Benennungen, Bauarten, Funktionsmaße

Sie gilt für tragbare Leitern.
Sie gilt nicht für Leitern für den besonderen beruflichen Gebrauch, wie Feuerwehrleitern, Dachleitern, Regalleitern, Einhängeleitern und fahrbare Leitern.

Échelles - Partie 1: Terminologie, types, dimensions fonctionnelles

"Elle s’applique aux échelles portables.
Elle ne s’applique pas aux échelles à usage professionnel spécifique telles que les échelles de pompiers, les échelles de couvreurs-ardoisiers, les échelles de rayonnages, les échelles munies de crochets et les échelles remorquables."

Lestve - 1. del: Terminologija, tipi, funkcionalne velikosti - Dopolnilo A1

General Information

Status
Not Published
ICS
01.040.97 - Domestic and commercial equipment. Entertainment. Sports (Vocabularies)
97.145 - Ladders
Technical Committee
CEN/TC 93 - Ladders
Drafting Committee
CEN/TC 93/WG 10 - Revision of EN 131-2
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
20-Jun-2019
Due Date
04-Sep-2019
Completion Date
20-Jun-2019
Directive
2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
Mandate
M/285 - Standardization mandate to CEN relative to the safety of consumers and children: ladders
Ref Project
SIST EN 131-1:2016/kFprA1:2019 - Ladders - Part 1: Terms, types, functional sizes

Relations

Merged Into
EN 131-1:2015+A1:2019 - Ladders - Part 1: Terms, types, functional sizes
Effective Date
18-Jan-2023
Amends
EN 131-1:2015 - Ladders - Part 1: Terms, types, functional sizes
Effective Date
21-Jun-2017

Buy Standard

EN 131-1:2016/oprA1:2018EN 131-1:2016/oprA1:2018
PreviousNext
Draft
EN 131-1:2016/oprA1:2018
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
SIST EN 131-1:2016/oprA1:2018
01-julij-2018
Lestve - 1. del: Terminologija, tipi, funkcionalne velikosti - Dopolnilo A1
Ladders - Part 1: Terms, types, functional sizes
Leitern - Teil 1: Benennungen, Bauarten, Funktionsmaße
Échelles - Partie 1: Terminologie, types, dimensions fonctionnelles
Ta slovenski standard je istoveten z: EN 131-1:2015/prA1
ICS:
01.040.97 Oprema za dom in trgovino. Domestic and commercial
Razvedrilo. Šport (Slovarji) equipment. Entertainment.
Sports (Vocabularies)
97.145 Lestve Ladders
SIST EN 131-1:2016/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST EN 131-1:2016/oprA1:2018
SIST EN 131-1:2016/oprA1:2018
DRAFT
EUROPEAN STANDARD
EN 131-1:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2018
ICS 01.040.97; 97.145
English Version
Ladders - Part 1: Terms, types, functional sizes
Échelles - Partie 1: Terminologie, types, dimensions Leitern - Teil 1: Benennungen, Bauarten,
fonctionnelles Funktionsmaße
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 93.

This draft amendment A1, if approved, will modify the European Standard EN 131-1:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 131-1:2015/prA1:2018 E
worldwide for CEN national Members.

SIST EN 131-1:2016/oprA1:2018
EN 131-1:2015/prA1:2018 (E)
Contents
Page
European foreword . 3
1 Modification to Clause 1 “Scope” . 4
2 Modification to definition 3.31 “inner width b ” . 4
3 Modification to Figure 18 . 5
4 Modification to definition 3.33 “total length l ” . 5
5 Modification to 4.2.1, Table 2 . 5
6 Modification to 4.3, Table 3 . 6
7 Modifica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 131-1:2015+A1:2019(Main + Amendment)
Ladders - Part 1: Terms, types, functional sizes
SIST EN 131-1:2016+A1:2019

This European Standard defines terms and specifies the general design characteristics of ladders.
It applies to portable ladders.
It does not apply to ladders designed for specific professional use such as fire brigade ladders, roof ladders and mobile ladders.
NOTE 1   For multiple hinge joint ladders EN 131-4 applies.
NOTE 2   For telescopic ladders EN 131-6 applies.
NOTE 3   For mobile ladders with platforms EN 131-7 applies.
NOTE 4   This standard does not apply to step stools for which EN 14183 applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 131-1:2007/FprA1(Amendment)
Ladders - Part 1: Terms, types, functional sizes
SIST EN 131-1:2007/kprA1:2011

This European Standard defines terms and specifies the general design characteristics of ladders.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 131-1:2015+A1:2019(Main + Amendment)
Ladders - Part 1: Terms, types, functional sizes
SIST EN 131-1:2016+A1:2019

This European Standard defines terms and specifies the general design characteristics of ladders.
It applies to portable ladders.
It does not apply to ladders designed for specific professional use such as fire brigade ladders, roof ladders and mobile ladders.
NOTE 1   For multiple hinge joint ladders EN 131-4 applies.
NOTE 2   For telescopic ladders EN 131-6 applies.
NOTE 3   For mobile ladders with platforms EN 131-7 applies.
NOTE 4   This standard does not apply to step stools for which EN 14183 applies.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 131-1:2007/FprA1(Amendment)
Ladders - Part 1: Terms, types, functional sizes
SIST EN 131-1:2007/kprA1:2011

This European Standard defines terms and specifies the general design characteristics of ladders.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2588:2024(Main)
Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
kSIST FprEN 2588:2024

This document specifies the characteristics of spherical plain bearings in corrosion resisting steel, with assembly slots, metric series, with or without lubrication holes and groove, intended for use in fixed or moving parts of aircraft structure and control mechanisms, within the temperature range from −54 °C to 150 °C.
It also applies to the following temperature ranges when lubricated with the following greases (see EN 2337):
-   ester type very high pressure grease (code letter A), operating range from −73 °C to 121 °C;
-   synthetic hydrocarbon type very high pressure grease general purpose (code letter B), operating range from −54 °C to 177 °C.
Their field of application when lubricated with grease code letter A is limited to 121 °C.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18075:2024(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular economy and sustainability - Recommendations/guidelines for design
kSIST-TS FprCEN/TS 18075:2024

The aim of this document is to provide general recommendations and guidelines on how to design a product to optimize its reuse and recyclability at the end of its lifetime as well as to take into account sustainable sourcing of materials for all floor covering product groups covered by CEN/TC 134. The overall target is to avoid waste and pollution and to achieve a product fit for the circular economy.
In a linear economy, the focus of product design is on developing new products without considering the recycling or reuse of the raw materials used.
This document provides guidance for processes allowing for (raw) materials used to be returned to the economic cycle based on circular design principles. The focus is on open systems that allow for economically interesting alternatives and are not limited to the principle of closed cycles (product to product).
Specific attention is given to renewable materials, where applicable.
The document is structured along the life cycle of the products, starting with the production phase.
Excluded is packaging, which is not considered part of the product end-of-life stage.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-3:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic substances (ISO 18562-3:2024)
kSIST FprEN ISO 18562-3:2024

This document specifies tests for the emissions of volatile organic substances from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify emissions of volatile organic substances that are added to the respirable gas stream by the materials of the gas pathway. This document establishes acceptance criteria for these tests.
NOTE            Gaseous emission of volatile organic substances includes emissions of volatile organic compounds, semi-volatile organic compounds and very volatile organic compounds.
This document addresses potential contamination of the gas stream arising from the gas pathways of medical devices or accessories, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the surfaces of gas pathways that are in direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 series.
This document is intended to be read in conjunction with ISO 18562-1.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 899-2:2024(Main)
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2024)
kSIST FprEN ISO 899-2:2024

This document specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pre-treatment, temperature and humidity. It is only applicable to a simple freely supported beam loaded at mid-span (three-point-loading test).
 The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials (see ISO 472 for definitions) test specimens moulded directly or machined from sheets or moulded articles.
NOTE            The method can be unsuitable for certain fibre-reinforced materials due to differences in fibre orientation
The method is intended to provide data for engineering-design, quality control, research and development purposes.
The method might not be applicable for determining the flexural creep of rigid cellular plastics (attention is drawn in this respect to ISO 1209-1 and ISO 1209-2).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-2:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2024)
kSIST FprEN ISO 18562-2:2024

This document specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify particles from 0,25 µm diameter to 10 µm diameter that are emitted by the medical device, its parts or accessories into the respirable gas stream. This document establishes acceptance criteria for these tests.
This document does not address nanoparticles. Insufficient data exist to establish exposure limits for particles less than 0,25 µm diameter.
This document does not address particles larger than 10 µm diameter. These particles are deposited in the nasal cavity. Additional information can be needed for medical devices or accessories that bypass the nose. This is outside the scope of this document but can be required by some authorities having jurisdiction.
This document therefore adopts the same approach as the US Environmental Protection Agency (EPA) in setting limits based solely on particle size and not their chemistry.
This document addresses potential contamination of the gas stream arising from the gas pathways, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the particles that are deliberately released by a nebulizer (i.e. the therapeutic agent).
This document does not address biological evaluation of the surfaces of gas pathways that have direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories, containing gas pathways that are addressed by this document, include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces, and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13997:2024(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2024)
oSIST prEN ISO 13997:2024

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day