iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10222-1:1998

(Main)

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes.   General information on technical delivery conditions is given in EN 10021.

Schmiedestücke aus Stahl für Druckbehälter - Teil 1: Allgemeine Anforderungen an Freiformschmiedestücke

Dieser Teil dieser Europäischen Norm legt die allgemeinen technischen Lieferbedingungen für Freiformschmiedestücke, ringgewalzte Erzeugnisse und geschmiedete Stäbe aus Stahl für Druckbehälter fest. Allgemeine Angaben über die technischen Lieferbedingungen werden in EN 10021 gemacht.

Pièces forgées en acier pour appareils à pression - Partie 1: Prescriptions générales concernant les pièces obtenues par forgeage libre

La présente partie du projet de norme européenne spécifie les conditions techniques générales de livraison des pièces obtenues par forgeage libre, des produits forgés par laminage circulaire et des barres forgées pour appareils à pression.

Jekleni izkovki za tlačne posode - 1. del: Splošne zahteve za prosto kovane izkovke

General Information

Status
Withdrawn
Publication Date
20-Jan-1998
Withdrawal Date
11-Apr-2017
ICS
77.140.85 - Iron and steel forgings
Technical Committee
ECISS/TC 111 - Steel castings and forgings
Drafting Committee
ECISS/TC 28 - Steel forgings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Apr-2017
Directive
2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
M/BC/CEN/89/10 - ECISS - 3rd programme
Ref Project
SIST EN 10222-1:1998 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

Relations

Replaced By
EN 10222-1:2017 - Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
Effective Date
19-Apr-2017
Amended By
EN 10222-1:1998/A1:2002 - Steel forgings for pressure purposes - Part 1 : General requirements for open die forgings
Effective Date
08-Jun-2022

Buy Standard

EN 10222-1:1998EN 10222-1:1998
PreviousNext
Standard
EN 10222-1:1998
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]NRYNHSchmiedestücke aus Stahl für Druckbehälter - Teil 1: Allgemeine Anforderungen an FreiformschmiedestückePieces forgées en acier pour appareils a pression - Partie 1: Prescriptions générales concernant les pieces obtenues par forgeage libreSteel forgings for pressure purposes - Part 1: General requirements for open die forgings77.140.85Železni in jekleni kovani izdelkiIron and steel forgings77.140.30Jekla za uporabo pod tlakomSteels for pressure purposesICS:Ta slovenski standard je istoveten z:EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10250-3:2022(Main)
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
SIST EN 10250-3:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from alloy special steel and supplied in the quenched and tempered condition.
The majority of steels listed in this document are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-2:2022(Main)
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
SIST EN 10250-2:2022

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from non-alloy quality and special steels and supplied in the normalized, normalized and tempered, quenched and tempered or annealed condition.
The majority of steels listed in this document, with properties in the quenched and tempered condition up to 160 mm thickness, are identical to steels specified in EN ISO 683-1 and EN ISO 683-2 and more extensive information on hardenability and technological properties is given in these standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-1:2022(Main)
Open die steel forgings for general engineering purposes - Part 1: General requirements
SIST EN 10250-1:2022

This document specifies the general technical delivery conditions for open die forgings, forged bars, and products pre-forged and finished in ring rolling mills, for general engineering purposes.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-4:2017+A1:2021(Main + Amendment)
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
SIST EN 10222-4:2017+A1:2021

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of weldable fine grain steels with high proof strength.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-2:2017+A1:2021(Main + Amendment)
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
SIST EN 10222-2:2017+A1:2021

This part of this European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of ferritic and martensitic steels with specified elevated temperature properties. Chemical composition and mechanical properties are specified.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery condition is given in EN 10021.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10250-4:2021(Main)
Open die steel forgings for general engineering purposes - Part 4: Stainless steels
SIST EN 10250-4:2021

This document specifies the technical delivery requirements for open die forgings, forged bars and products pre-forged and finished in ring rolling mills, manufactured from stainless steels with ferritic, martensitic, austenitic and austenitic-ferritic structures.
NOTE The majority of steels listed in this part of EN 10250 are identical to steels specified EN 10088-3 and EN 10028-7, and more extensive information on properties is given in these European Standards.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-3:2017(Main)
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
SIST EN 10222-3:2017

This European Standard specifies the technical delivery conditions of forgings for pressure purposes, made of nickel steels, for use at low temperatures.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222-5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-5:2017(Main)
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
SIST EN 10222-5:2017

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of stainless steels, including creep resisting steels. Chemical composition and mechanical properties are specified.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10222-1:2017(Main)
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
SIST EN 10222-1:2017

This Part of this European Standard specifies the general technical delivery conditions for open die steel forgings, ring rolled products and forged bars for pressure purposes.
NOTE   Once this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.
General information on technical delivery conditions is given in EN 10021.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10228-2:2016(Main)
Non-destructive testing of steel forgings - Part 2: Penetrant testing
SIST EN 10228-2:2016

This European Standard describes techniques and acceptance criteria to be used for the penetrant testing of steel forgings. The method described is used for the detection of surface discontinuities.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day