EN 725-5:1996
(Main)Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution
Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution
This part of EN 725 describes the preparation of suspensions and calibration of apparatus, prior to the measurement of particle size distribution of powders used for advanced technical ceramics. The preparation is appropriate for measurements either by the sedimentation method, with the detection of X-ray absorption, or the laser light scattering method.
Hochleistungskeramik - Prüfverfahren keramische Pulver - T eil 5: Bestimmung der Teilchengrößenverteilung
Dieser Teil von EN 725 beschreibt die Herstellung von Suspensionen und die Gerätekalibrierung, vorrangig für die Messung der Teilchengrößenverteilung von Pulvern, die für die Hochleistungskeramik verwendet werden. Die Herstellung ist für Messungen entweder nach dem Sedimentationsverfahren mit der Ermittlung der Absorption der Röntgenstrahlung oder dem Laser-Streuverfahren geeignet.
Céramiques techniques avancées - Méthodes d'essai pour les poudres céramiques - Partie 5: Détermination de la distribution granulométrique
La présente partie de l'EN 725 décrit comment préparer les suspensions et étalonner les appareils avant de mesurer la distribution granulométrique des poudres utilisées pour la préparation des céramiques techniques avancées. La préparation est adaptée à des mesures par sédimentation, détection de l'absorption des rayons X ou diffraction d'un faisceau laser.
Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution
General Information
- Status
- Withdrawn
- Publication Date
- 23-Jan-1996
- Withdrawal Date
- 09-Jan-2007
- Technical Committee
- CEN/TC 184 - Advanced technical ceramics
- Drafting Committee
- CEN/TC 184/WG 2 - Methods of test for ceramic powders
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 10-Jan-2007
- Completion Date
- 10-Jan-2007
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 725-5:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of the particle size distribution". This standard covers: This part of EN 725 describes the preparation of suspensions and calibration of apparatus, prior to the measurement of particle size distribution of powders used for advanced technical ceramics. The preparation is appropriate for measurements either by the sedimentation method, with the detection of X-ray absorption, or the laser light scattering method.
This part of EN 725 describes the preparation of suspensions and calibration of apparatus, prior to the measurement of particle size distribution of powders used for advanced technical ceramics. The preparation is appropriate for measurements either by the sedimentation method, with the detection of X-ray absorption, or the laser light scattering method.
EN 725-5:1996 is classified under the following ICS (International Classification for Standards) categories: 81.060.99 - Other standards related to ceramics. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 725-5:1996 has the following relationships with other standards: It is inter standard links to EN 725-5:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 725-5:1996 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/90/4. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 725-5:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2000
Advanced technical ceramics - Methods of test for ceramic powders - Part 5:
Determination of the particle size distribution
Advanced technical ceramics - Methods of test for ceramic powders - Part 5:
Determination of the particle size distribution
Hochleistungskeramik - Prüfverfahren keramische Pulver - T eil 5: Bestimmung der
Teilchengrößenverteilung
Céramiques techniques avancées - Méthodes d'essai pour les poudres céramiques -
Partie 5: Détermination de la distribution granulométrique
Ta slovenski standard je istoveten z: EN 725-5:1996
ICS:
81.060.30 Sodobna keramika Advanced ceramics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 725-5:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...