iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 3238:2010

(Main)

Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

This standard specifies the requirements for shear testing rivet wire and rivets in metallic materials for aerospace applications.
It shall be applied when referred to in the EN technical specification or material standard unless otherwise specified on the drawing, order or inspection schedule.

Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten

Diese Norm legt die Anforderungen an die Prüfung der Scherfestigkeit von Nietdraht und Nieten bei
metallischen Werkstoffen zur Anwendung in der Luft- und Raumfahrt fest.
Sie ist anzuwenden, wenn auf sie in der Europäischen Technischen Spezifikation oder Werkstoffnorm
verwiesen wird, sofern auf der Konstruktionszeichnung, in der Bestellung oder in der Prüfanweisung nichts
anderes festgelegt ist.

Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets

Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in kovice

Ta standard določa zahteve za strižni preskus za žico za kovičenje in kovice v kovinskih materialih za uporabo v aeronavtiki.
Uporablja se, kadar se nanaša na tehnično specifikacijo EN ali standard za materiale, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.

General Information

Status
Published
Publication Date
05-Oct-2010
Withdrawal Date
29-Apr-2011
ICS
49.025.01 - Materials for aerospace construction in general
49.030.60 - Rivets
49.030.99 - Other fasteners
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 4 - Metallic
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Oct-2010
Completion Date
06-Oct-2010
Ref Project
SIST EN 3238:2011 - Aerospace series - Metallic materials - Test method - Shear test for wires and rivets

Relations

Revised
EN 3228:2022 - Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C
Effective Date
26-Jun-2019

Buy Standard

EN 3238:2011EN 3238:2011
PreviousNext
Standard
EN 3238:2011
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kovinski materiali - Preskusne metode - Strižni preskus za žice in koviceLuft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und NietenSérie aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivetsAerospace series - Metallic materials - Test method - Shear test for wires and rivets49.025.05Železove zlitine na splošnoFerrous alloys in generalICS:Ta slovenski standard je istoveten z:EN 3238:2010SIST EN 3238:2011en,de01-november-2011SIST EN 3238:2011SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3238
October 2010 ICS 49.030.99 English Version
Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets
Luft- und Raumfahrt - Metallische Werkstoffe - Prüfverfahren - Prüfung der Scherfestigkeit von Drähten und Nieten This European Standard was approved by CEN on 5 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3238:2010: ESIST EN 3238:2011
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17928-1:2024(Main)
Gas infrastructure - Injection stations - Part 1: General requirements
kSIST FprEN 17928-1:2024

This document establishes the functional requirements for stations for the injection of biomethane, substitute natural gas (SNG) and hydrogen into gas transmission and distribution systems operated with gases (natural gas, biomethane, SNG, hydrogen, gas mixtures) in accordance with European technical rules that ensure the interoperability of systems.
Figure 1 describes the general approach including all the relevant functions that can be installed in different configurations. The injection of Hydrogen is covered separately in EN 17928-3:2024.
This document also applies to refeeding stations that feed such gases back into upstream gas supply networks; see Figure 2.
This document represents the state of the art at the time of its preparation.
This document does not apply to injection stations operating prior to the publication of this document.
This document specifies common basic principles for gas infrastructure. Users of this document are expected to be aware that more detailed national standards and/or codes of practice can exist in the CEN member countries. This document is intended to be applied in association with these national standards and/or codes of practice setting out the above-mentioned basic principles.
In the event of terms of additional requirements in national legislation/regulation than in this document, CEN/TR 13737 (all parts) illustrates these terms.
CEN/TR 13737 (all parts) gives:
—   legislation/regulations applicable in a member state;
—   if appropriate, more restrictive national requirements;
—   a national contact point for the latest information.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13237:2024(Main)
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
oSIST prEN 13237:2022

This document specifies terms and definitions (vocabulary) to be used in suitable standards dealing with equipment and protective systems intended for use in potentially explosive atmospheres within the scope of Directive 2014/34/EU.
NOTE   Terms and definitions avoid misunderstandings that are important in relation to the essential health and safety requirements of Directive 2014/34/EU.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-7:2024(Main)
Woodworking machines - Safety - Part 7: Surface planing, thickness planing and combined surface/thickness planing machines (ISO 19085-7:2024)
kSIST FprEN ISO 19085-7:2024

This document specifies the safety requirements and measures for
—     surface planing machines, also called jointers,
—     thickness planing machines, also called planers or single surface planers, and
—     combined surface/thickness planing machines
with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece, and capable of continuous production use, altogether referred to as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2).
This document deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer. Reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with.
This document does not apply to:
a)       machines with more than one cutter block;
b)       machines with a mortising unit driven by a separate motor;
c)        machines where the cutter block is adjustable for depth of cut setting in thickness planing mode;
d)       machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units;
e)       machines where surface planing and thickness planing can be performed at the same time;
f)         machines intended for use in potentially explosive atmosphere;
g)       machines manufactured prior to the publication of this document.

  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2350:2024(Main)
Aerospace series - Circuit breakers - Technical specification
kSIST FprEN 2350:2024
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 927-15:2024(Main)
Paints and varnishes - Coating materials and coating systems for exterior wood - Part 15: Assessment of bleeding of coloured wood extractives through a coating by means of a water immersion test
kSIST-TS FprCEN/TS 927-15:2024

This document specifies a test method using water immersion test for assessing the bleeding of coloured wood extractives through a coating. Leachates of coated and uncoated wood are collected after the immersion procedure and their colour is compared. The colour of the coated wood before and after immersion tests is also compared. This document does not specify acceptance values for colour differences that can be tolerated and it is not applicable to staining caused by knots for which there is a different test method (see EN 927 7).
NOTE   The method has been developed for oak and chestnut wood and might be applicable for other wood substrates containing water soluble extractives.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-5:2024(Main)
Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2024)
kSIST FprEN ISO 19085-5:2024

This document specifies the safety requirements and measures for dimension saws (defined in 3.1), capable of continuous production use and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
a)       device to raise and lower the main saw blade and scoring saw blade;
b)       device to tilt the main saw blade and scoring saw blade for angled cutting in one or both directions;
c)        device for scoring;
d)       device for grooving with milling tool with a width not exceeding 20 mm;
e)       demountable power feed unit;
f)         power-operated sliding table;
g)       workpiece clamping.
This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.

  • Draft
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16186-6:2024(Main)
Railway applications - Driver's cab - Part 6: Integration of displays, controls and indicators for tram vehicles
kSIST FprEN 16186-6:2024

This document is applicable to vehicles operating on tram networks.
This document gives design requirements and guidance in order to ensure visibility and operability of displays, controls and indicators in the cab in all operating conditions (day, night, natural or artificial lighting).
It covers four aspects:
-   the characteristics of the displays, controls and indicators in order to ensure proper visibility: i.e. range of luminance and contrast as well as the possibility of adjustment of perceived brightness;
-   the requirements for the location of the displays, keyboards, controls and indicators in the cab and on the driver’s desk: i.e. position, angle of visibility, etc. with consideration of the normal driving position and the working environment (windscreen, natural or artificial lighting in the cab, unwanted glare and reflections, etc.);
-   the characteristics and requirements for the location of microphones and loudspeakers;
-   design of symbols.
NOTE   All element numbers within the text refer to Table B.1.
This document does not apply to refurbishment of existing vehicles. This document is not intended to be applicable to driver's auxiliary desk, except for 5.3.13, Clause 6, 7.1.2, Clause 9 and Table B.1.

  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17450-2:2024(Main)
Fixed firefighting systems - Water mist systems - Part 2: Product characteristics and test methods for nozzles
kSIST FprEN 17450-2:2024

This document specifies product characteristics and test methods of open nozzles and automatic nozzles for use in water mist systems.
NOTE   All pressure data in this document are given as gauge pressures in bar.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17388-1:2024(Main)
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 1: Cradle to grave and module D
kSIST FprEN 17388-1:2024

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to grave and module D EPD using:
-   either generic data and system generic data;
or
-   specific data and system specific data.
This document includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data;
-   define generic data and system generic data which are to be used for an EPD.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17388-2:2024(Main)
Flexible sheets for waterproofing - Environmental product declarations - Product category rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D
kSIST FprEN 17388-2:2024

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to gate with options, modules C1-C4 and module D EPD using specific data. This document includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the life cycle inventory (LCI) and the life cycle impact assessment (LCIA) underlying an EPD, including the specification of the quality of the applied data.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day