EN ISO 11161:2007/A1:2010

SLOVENSKI STANDARD
01-junij-2010
Varnost strojev - Integrirani proizvodni sistemi - Osnovne zahteve - Dopolnilo A1
(ISO 11161:2007/Amd 1:2010)
Safety of machinery - Integrated manufacturing systems - Basic requirements -
Amendment A1 (ISO 11161:2007/Amd 1:2010)
Sicherheit von Maschinen - Integrierte Fertigungssysteme - Grundlegende
Anforderungen (ISO 11161:2007/Amd 1:2010)
Sécurité des machines - Systèmes de fabrication intégrés - Prescriptions fondamentales
- Amendement A1 (ISO 11161:2007/Amd 1:2010)
Ta slovenski standard je istoveten z: EN ISO 11161:2007/A1:2010
ICS:
13.110 Varnost strojev Safety of machinery
25.040.01 Sistemi za avtomatizacijo v Industrial automation
industriji na splošno systems in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 11161:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2010
ICS 13.110; 25.040.01
English Version
Safety of machinery - Integrated manufacturing systems - Basic
requirements - Amendment 1 (ISO 11161:2007/Amd 1:2010)
Sécurité des machines - Systèmes de fabrication intégrés - Sicherheit von Maschinen - Integrierte Fertigungssysteme -
Prescriptions fondamentales - Amendement 1 (ISO Grundlegende Anforderungen (ISO 11161:2007/Amd
11161:2007/Amd 1:2010) 1:2010)
This amendment A1 modifies the European Standard EN ISO 11161:2007; it was approved by CEN on 11 February 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11161:2007/A1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 11161:2007/A1:2010) has been prepared by Technical Committee ISO/TC 199
"Safety of machinery" in collaboration with Technical Committee CEN/TC 114 “Safety of machinery”, the
secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 11161:2007 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and
conflicting national standards shall be withdrawn at the latest by September 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11161:2007/Amd 1:2010 has been approved by CEN as a EN ISO 11161:2007/A1:2010
without any modification.
INTERNATIONAL ISO
STANDARD 11161
Second edition
2007-05-15
AMENDMENT 1
2010-03-01
Safety of machinery — Integrated
manufacturing systems — Basic
requirements —
AMENDMENT 1
Sécurité des machines — Systèmes de fabrication intégrés —
Prescriptions fondamentales —
AMENDEMENT 1
Reference number
ISO 11161:2007/Amd.1:2010(E)
©
ISO 2010
ISO 11161:2007/Amd.1:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not i
...