EN 13218:2002+A1:2008/AC:2008
(Corrigendum)Machine tools - Safety - Stationary grinding machines
Machine tools - Safety - Stationary grinding machines
This standard specifies the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines as defined in 3.1 and 3.2 and intended to be used for the grinding of workpieces of cold metal. This standard deals with the significant hazards as listed in 4. This standard does not apply to honing, polishing and belt grinding machines. This standard applies to machines which are manufactured after the date of issue of this standard.
Werkzeugmaschinen - Sicherheit - Ortsfeste Schleifmaschinen
Machines-outils - Sécurité - Machines à meuler fixes
Obdelovalni stroji - Varnost - Stacionarni brusni stroji
Ta standard določa tehnične zahteve za varnost in/ali zaščitne ukrepe, ki jih morajo sprejeti osebe pri načrtovanju, izgradnji in dobavi (vključno z postavitvijo in razstavitvijo, ureditvijo transporta in vzdrževanjem) stacionarnih brusnih strojev, kot je določeno v točkah 3.1 in 3.2 ter namenjenim za uporabo pri brušenju obdelovanca iz hladne kovine. Ta standard obravnava velike nevarnostmi, kot so navedeno v točki 4. Ta standard ne velja za honanje, loščenje in tračne brusilnike. Ta standard velja za opremo, ki je bila izdelana po datumu izdaje tega standarda.
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-2008
- Withdrawal Date
- 27-Apr-2010
- Technical Committee
- CEN/TC 143 - Machine tools - Safety
- Drafting Committee
- CEN/TC 143 - Machine tools - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Apr-2010
- Completion Date
- 28-Apr-2010
- Directive
- 98/37/EC - Machinery
Relations
- Replaced By
EN ISO 16089:2015 - Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) - Effective Date
- 08-Jun-2022
- Effective Date
- 20-Feb-2010
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 13218:2002+A1:2008/AC:2008 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Machine tools - Safety - Stationary grinding machines". This standard covers: This standard specifies the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines as defined in 3.1 and 3.2 and intended to be used for the grinding of workpieces of cold metal. This standard deals with the significant hazards as listed in 4. This standard does not apply to honing, polishing and belt grinding machines. This standard applies to machines which are manufactured after the date of issue of this standard.
This standard specifies the technical safety requirements and/or protective measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, arrangements for transport and maintenance) of stationary grinding machines as defined in 3.1 and 3.2 and intended to be used for the grinding of workpieces of cold metal. This standard deals with the significant hazards as listed in 4. This standard does not apply to honing, polishing and belt grinding machines. This standard applies to machines which are manufactured after the date of issue of this standard.
EN 13218:2002+A1:2008/AC:2008 is classified under the following ICS (International Classification for Standards) categories: 25.080.50 - Grinding and polishing machines. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13218:2002+A1:2008/AC:2008 has the following relationships with other standards: It is inter standard links to EN ISO 16089:2015, EN 13218:2002+A1:2008/AC:2010, EN 13218:2002+A1:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13218:2002+A1:2008/AC:2008 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13218:2002+A1:2008/AC:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Obdelovalni stroji - Varnost - Stacionarni brusni strojiWerkzeugmaschinen - Sicherheit - Ortsfeste SchleifmaschinenMachines-outils - Sécurité - Machines à meuler fixesMachine tools - Safety - Stationary grinding machines25.080.50Brusilni in polirni strojiGrinding and polishing machinesICS:Ta slovenski standard je istoveten z:EN 13218:2002+A1:2008/AC:2008SIST EN 13218:2003+A1:2008/AC:2008en,de01-december-2008SIST EN 13218:2003+A1:2008/AC:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN13218:2002+A1:2008/ACOctober 2008Octobre 2008Oktober 2008ICS 25.080.50English versionVersion FrançaiseDeutsche FassungMachine tools - Safety - Stationary grinding machinesMachines-outils - Sécurité - Machines àmeuler fixesWerkzeugmaschinen - Sicherheit -Ortsfeste SchleifmaschinenThis corrigendum becomes effective on 22 October 2008 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 22 octobre 2008 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 22.Oktober 2008 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN 13218:2002+A1:2008/AC:2008 D/E/FSIST EN 13218:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...