EN 17110:2018
(Main)Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve
This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere.
It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document.
The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Be- und Entlüftungsventil für Gassammelleitungen
Dieses Dokument behandelt das Be- und Entlüftungsventil für Gassammelleitungen, das zur kontrollierten Entlüftung der Gassammelleitung in die Atmosphäre dient.
Dieses Dokument legt die Leistungsanforderungen und die entscheidenden Maße des Be- und Entlüftungsventil für Gassammelleitungen fest. Es sind außerdem die Prüfungen festgelegt, um die Übereinstimmung der Ausrüstung mit den Anforderungen dieser Norm zu bestätigen.
Die in diesem Dokument beschriebene Bedienungsausrüstung ist für flüssige Erdölerzeugnisse und andere gefährliche Güter der Klasse 3 des ADR [1] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff), und die nicht als giftig oder ätzend eingestuft sind.
Citernes pour le transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert pour collecteur de vapeurs
Le présent document couvre l’évent de transfert pour collecteur de vapeurs assurant la fonction d’aération régulée du collecteur de vapeurs dans l'atmosphère.
Il spécifie les exigences de performances et les dimensions critiques de l’évent de transfert pour collecteur de vapeurs. Il spécifie également les essais nécessaires pour vérifier la conformité de l’équipement au présent document.
L’équipement de service spécifié dans le présent document convient à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR[1] dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence) et qui n’appartiennent à aucune sous classification des produits toxiques ou corrosifs.
Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Oddušni ventil za zbiralnik plinske faze
Ta dokument obravnava oddušni ventil za zbiralnik plinske faze, ki se uporablja za nadzirano razbremenitev tlaka zbiralnika plinske faze v atmosfero.
Določa zahteve glede zmogljivosti in kritične mere oddušnega ventila za zbiralnik plinske faze. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem dokumentom.
Oprema, opredeljena v tem dokumentu, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR [1], katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.
General Information
Overview
EN 17110:2018 is a European standard developed by CEN that defines the requirements for vapour manifold vent valves used on tanks for the transport of dangerous goods. This standard specifically covers the design, performance, and testing of vapour manifold vent valves used to provide controlled venting of the vapour manifold to the atmosphere. The valves are suitable for liquid petroleum products and other dangerous substances within ADR Class 3, with a vapour pressure not exceeding 110 kPa at 50 °C, including petrol that is not toxic or corrosive.
The vapour manifold vent valve plays a critical role in ensuring the safe release and intake of vapours during the transportation of dangerous goods, mitigating pressure build-up, and preventing hazardous leaks.
Key Topics
Functionality
The valve must ensure controlled venting of vapour to atmosphere, remain vapour tight when closed, and may include features such as a flame arrester, self-operation, and open/closed indicators. It may provide both pressure and vacuum breathing functions to maintain tank safety.Design Characteristics
- Must allow a controlled vapour path between the vapour manifold and the atmosphere.
- Self-operating valves should be resealing, prevent unauthorized adjustments, and return automatically to a passive state.
- Pressure relief opening setting not exceeding 12 kPa (gauge) and vacuum relief opening between –0.8 kPa (gauge).
- Compliance with ingress protection rating IP 21 as per EN 60529.
- Flow capacity diagrams must be supplied by manufacturers for pressure and vacuum performance.
- Designed for operation between approximately –40 °C to +50 °C (extendable to +70 °C for harsh environments).
- Material specifications must be provided for parts in contact with dangerous substances.
- Flange connection dimensions and tolerances are standardized to ensure interchangeability and compatibility.
Testing Requirements
- Production Tests: Include internal seat tightness tests and operability tests performed regularly with Lot Acceptance Quality Limits (AQL) of 2.5%.
- Type Tests: Performed on at least two samples to demonstrate shell strength (at 400 kPa), shell tightness, internal seat tightness, and mechanical endurance.
- Testing procedures conform to EN 12266-1 and EN 12266-2 standards with adaptations as specified.
- Tests verify resistance to pressure, vacuum, mechanical endurance, and tight sealing under defined conditions.
Marking & Instructions
Provides guidelines on marking valves correctly and includes installation, operating, and maintenance instructions to ensure safe and effective performance.
Applications
Transport Tanks for Dangerous Goods
EN 17110:2018 valves are integral to service equipment on road tankers used to transport liquid petroleum products and hazardous substances as defined in ADR Class 3. The standard ensures safe venting of vapours generated during loading, unloading, and transport.Petroleum and Chemical Industries
The vapour manifold vent valve enables secure handling of volatile substances, reducing environmental impact and enhancing safety during transport.Tank Safety Management
By enforcing strict performance and testing requirements, this standard helps manufacturers and operators maintain compliance with safety regulations, preventing accidents caused by overpressure, vacuum conditions, or vapour leaks.
Related Standards
EN 17110:2018 forms part of a comprehensive suite of European standards addressing service equipment for transport tanks carrying dangerous goods with vapour pressures not exceeding 110 kPa. Related standards include:
- EN 13081 – Vapour collection adaptor and coupler
- EN 13082 – Vapour transfer valve
- EN 13308 – Non-pressure balanced footvalve
- EN 13314 – Fill hole cover
- EN 13315 – Gravity discharge coupler
- EN 14595 – Breather device
- EN 14596 – Emergency pressure relief valve
- EN 16522 – Flame arresters for breather devices
These standards collectively ensure the integrity and safety of tank service equipment during the transport of dangerous goods.
Keywords: vapour manifold vent valve, EN 17110:2018, transport tanks, dangerous goods, vapour venting, tank safety, Class 3 substances, pressure relief valve, vacuum breathing, CEN standards, ADR compliance, tank service equipment, petroleum transport valves.
Frequently Asked Questions
EN 17110:2018 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve". This standard covers: This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere. It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document. The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
This document covers the vapour manifold vent valve used to provide controlled venting of the vapour manifold to atmosphere. It specifies the performance requirements and the critical dimensions of the vapour manifold vent valve. It also specifies the tests necessary to verify compliance of the equipment with this document. The service equipment specified by this document is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [1] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.
EN 17110:2018 is classified under the following ICS (International Classification for Standards) categories: 13.300 - Protection against dangerous goods; 23.020.20 - Vessels and containers mounted on vehicles; 23.060.99 - Other valves. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 17110:2018 is associated with the following European legislation: EU Directives/Regulations: 2009/126/EC, 94/63/EC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 17110:2018 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Oddušni ventil za zbiralnik plinske fazeTanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Be- und Entlüftungsventil für GassammelleitungenCiternes destinées au transport de matières dangereuses - Équipement de service - Évent de transfert pour collecteur de vapeursTanks for transport of dangerous goods - Service equipment for tanks - Vapour manifold vent valve23.060.99Drugi ventiliOther valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 17110:2018SIST EN 17110:2018en,fr,de01-november-2018SIST EN 17110:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 17110
August
t r s z ICS
s uä u r râ
t uä r t rä t râ
t uä r x rä { { English Version
Tanks for transport of dangerous goods æ Service equipment for tanks æ Vapour manifold vent valve Citernes destinées au transport de matières dangereuses æ Équipement de service æ Évent de transfert pour collecteur de vapeurs
Tanks für die Beförderung gefährlicher Güter æ Bedienungsausrüstung von Tanks æ Beæ und Entlüftungsventil für Gassammelleitungen This European Standard was approved by CEN on
t u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s y s s rã t r s z ESIST EN 17110:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...