EN 3278:2012
(Main)Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
This standard specifies the characteristics and technical requirements for protruding head tubular sleeves, in corrosion resisting steel, which may be plain or provided with a series of annular grooves.
They are for use in aerospace assemblies whose maximum operating temperature does not exceed 650 °C.
Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm)
Diese Norm legt die Merkmale von und technischen Anforderungen an Hülsen aus korrosionsbeständigem Stahl, mit überstehendem Kopf fest, die glatt oder mit einer Reihe Ringnuten versehen sein können.
Sie sind für Baugruppen bestimmt, die in der Luft- und Raumfahrt eingesetzt werden und deren höchste Betriebstemperatur 650 °C nicht überschreitet.
Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Èpaisser de paroi 0,25 mm)
Aeronavtika - Obojke, cevaste, štrleče glave, iz korozijsko odpornega jekla, pasivirane (debelina stene 0,25 mm)
Ta evropski standard določa značilnosti in tehnične zahteve za cevaste odbojke s štrlečo glavo iz korozijsko odpornega jekla, ki so lahko navadne ali opremljene s serijo obročastih utorov. Namenjene so za uporabo v aeronavtičnih sestavih, kjer največja obratovalna temperatura ne presega 650 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm)Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Épaisseur de paroi 0,25 mm)Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)49.030.99Drugi vezni elementiOther fastenersICS:Ta slovenski standard je istoveten z:EN 3278:2012SIST EN 3278:2012en,de01-maj-2012SIST EN 3278:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3278
March 2012 ICS 49.030.99 English Version
Aerospace series - Sleeves, tubular, protruding head, in corrosion resisting steel, passivated (0,25 mm wall thickness)
Série aérospatiale - Douilles tubulaires, tête saillante en acier résistant à la corrosion, passivé (Èpaisser de paroi 0,25 mm)
Luft- und Raumfahrt - Hülsen, überstehender Kopf, aus korrosionsbeständigem Stahl, passiviert (Wanddicke 0,25 mm) This European Standard was approved by CEN on 24 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3278:2012: ESIST EN 3278:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.