EN ISO/IEC 19788-1:2012

SLOVENSKI STANDARD
01-marec-2014
,QIRUPDFLMVNDWHKQRORJLMD8þHQMHL]REUDåHYDQMHLQXVSRVDEOMDQMH0HWDSRGDWNL
]DXþQHYLUHGHO2NYLU,62,(&
Information technology - Learning, education and training - Metadata for learning
resources - Part 1: Framework (ISO/IEC 19788-1:2011)
Informationstechnik - Lernen, Ausbilden und Weiterbilden - Metadaten für
Lernressourcen - Teil 1: Das Rahmenwerk (ISO/IEC 19788-1:2011)
Technologies de l'information - Apprentissage, éducation et formation - Métadonnées
pour ressources d'apprentissage - Partie 1: Charpente (ISO/IEC 19788-1:2011)
Ta slovenski standard je istoveten z: EN ISO/IEC 19788-1:2012
ICS:
03.180 Vzgoja in izobraževanje Education
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO/IEC 19788-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 03.100.30; 35.240.99
English Version
Information technology - Learning, education and training -
Metadata for learning resources - Part 1: Framework (ISO/IEC
19788-1:2011)
Technologies de l'information - Apprentissage, éducation et Informationstechnik - Lernen, Ausbilden und Weiterbilden -
formation - Métadonnées pour ressources d'apprentissage Metadaten für Lernressourcen - Teil 1: Das Rahmenwerk
- Partie 1: Charpente (ISO/IEC 19788-1:2011) (ISO/IEC 19788-1:2011)
This European Standard was approved by CEN on 11 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 19788-1:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO/IEC 19788-1:2011 has been prepared by Technical Committee JTC 1 “Information
technology” of the International Organization for Standardization (ISO) and the International Electrotechnical
Commission (IEC) and has been taken over as EN ISO/IEC 19788-1:2012 by Technical Committee
CEN/TC 353 “Information and Communication Technologies for Learning, Education and Training” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEC 19788-1:2011 has been approved by CEN as a EN ISO/IEC 19788-1:2012 without any
modification.
INTERNATIONAL ISO/IEC
STANDARD 19788-1
First edition
2011-01-15
Information technology — Learning,
education and training — Metadata for
learning resources —
Part 1:
Framework
Technologies de l'information — Apprentissage, éducation et
formation — Métadonnées pour ressources d'apprentissage —
Partie 1: Charpente
Reference number
ISO/IEC 19788-1:2011(E)
©
ISO/IEC 2011
ISO/IEC 19788-1:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO/IEC 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2011 – All rights reserved

ISO/IEC 19788-1:2011(E)
Contents Page
Foreword .v
Introduction.vi
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Abbreviated terms.6
5 Principles governing the development of ISO/IEC 19788 .6
5.1 A multipart standard .6
5.2 Development driven by user requirements .6
5.3 Multilingual equivalencies and multicultural requirements support .7
5.4 Support for various levels of granularity.7
5.5 Re-use of international standards and specifications.7
5.6 User extensions.7
6 Specification of MLR data elements.7
6.1 Introduction.7
6.2 Data element specification attributes.7
6.3 Data element specification: Matrix template .12
6.4 A “Data element specification” example .12
7 MLR data elements.13
7.1 Data element .13
8 Resource class .14
8.1 Definition of a Resource class .14
8.2 Attributes of a Resource class.14
8.3 Example of the definition of a Resource class.15
8.4 Predefined Resource classes .15
9 Predefined rule sets .16
9.1 Introduction.16
9.2 MLR string.16
9.3 Date.17
9.4 Date & Time.17
9.5 Duration.18
10 Metadata learning resource record .18
10.1 Definition of a MLR record.18
10.2 Attributes of a MLR record .18
11 Data element groups.19
11.1 Introduction.19
11.2 Data element group.19
11.3 Data element group specification attributes .19
11.4 Specification of a data element group .21
11.5 Tree notation for data element group specifications .24
12 Specification of application profiles.24
12.1 Introduction.24
12.2 Application profile attributes .25
12.3 Data element specification in an application profile specification .26
12.4 Issues related to vocabularies .26
12.5 Specification of an application profile .26
© ISO/IEC 2011 – All rights reserved iii

ISO/IEC 19788-1:2011(E)
13 Rules governing the management and addition of new parts of the multipart MLR. 27
13.1 Introduction. 27
13.2 Categorization of ISO/IEC 19788 Parts . 27
13.3 Content of parts specifying data elements . 27
13.4 Content of parts specifyin
...