iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12608-4:2024

(Main)

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

Profile aus weichmacherfreiem Polyvinylchlorid (PVC‑U) zur Herstellung von Fenstern und Türen – Klassifizierung, Anforderungen und Prüfverfahren – Teil 4: PVC‑U-Profile mit thermo-kaschierten Folien

Dieses Dokument legt die Klassifizierungen, Anforderungen an und Prüfverfahren für Profile aus weichmacherfreiem Polyvinylchlorid (PVC U) mit thermo-kaschierten Folien zur Herstellung von Fenstern und Türen fest, deren Folie für den Außeneinsatz vorgesehen ist.
ANMERKUNG 1   Aus redaktionellen Gründen wird in diesem Dokument die Benennung "Fenster" für Fenster/Tür angewendet.
ANMERKUNG 2   Für die Produktionskontrolle können andere Prüfverfahren als die in diesem Dokument festgelegten verwendet werden.

Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Classification, exigences et méthodes d’essai - Partie 4 : Profilés en PVC-U avec des films thermo-laminés

Le présent document spécifie les classifications, les exigences et les méthodes d’essai des profilés de poly(chlorure de vinyle) non plastifié (PVC-U) avec films thermo-laminés conçus pour un usage extérieur, qui sont destinés à être utilisés pour la fabrication de fenêtres et de portes.
NOTE 1   Pour des raisons éditoriales, dans ce document le terme « fenêtre » est utilisé pour « fenêtre/porte ».
NOTE 2   Pour les besoins du contrôle de la production, des méthodes d’essai autres que celles spécifiées dans le présent document peuvent être utilisées.

Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje, zahteve in preskusne metode - 4. del: PVC-U profili s termolaminiranimi folijami

General Information

Status
Not Published
Publication Date
19-Nov-2024
ICS
83.140.99 - Other rubber and plastics products
91.060.50 - Doors and windows
Technical Committee
CEN/TC 249 - Plastics
Drafting Committee
CEN/TC 249/WG 21 - Profiles for windows and doors
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
27-Sep-2024
Due Date
27-Oct-2025
Completion Date
27-Sep-2024
Ref Project
oSIST prEN 12608-4:2024 - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils

Buy Standard

prEN 12608-4:2024prEN 12608-4:2024
PreviousNext
Draft
prEN 12608-4:2024
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2024
Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje,
zahteve in preskusne metode - 4. del: PVC-U profili s termolaminiranimi folijami
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and
doors - Classification, requirements and test methods - Part 4: PVC-U profiles with
thermo-laminated foils
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
und Türen – Klassifizierung, Anforderungen und Prüfverfahren – Teil 4: PVC-U-Profile
mit thermo-kaschierten Folien
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres
et des portes - Classification, exigences et méthodes d’essai - Partie 4 : Profilés en PVC-
U avec des films thermo-laminés
Ta slovenski standard je istoveten z: prEN 12608-4
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 12608-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2024
ICS 83.140.99; 91.060.50
English Version
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the
fabrication of windows and doors - Classification,
requirements and test methods - Part 4: PVC-U profiles
with thermo-laminated foils
Profilés de poly(chlorure de vinyle) non plastifié (PVC- Profile aus weichmacherfreiem Polyvinylchlorid (PVC-
U) pour la fabrication des fenêtres et des portes ¿ U) zur Herstellung von Fenstern und Türen -
Classification, exigences et méthodes d'essai ¿ Partie 4: Klassifizierung, Anforderungen und Prüfverfahren -
Profilés en PVC-U avec des films thermolaminées Teil 4: PVC-U-Profile mit thermo-kaschierten Folien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12608-4:2024 E
worldwide for CEN national Members.

prEN 12608-4:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classifications . 4
5 Requirements for base profiles . 4
5.1 Base profiles in conformance with EN 12608-1 . 4
5.2 Other base profiles . 5
6 Requirements for foils . 5
7 Requirements for adhesion of the foil . 5
7.1 Adhesion of the foil. 5
7.2 Adhesion of the foil after hydrolytic/thermolytic storage . 5
8 Requirements for laminated profiles . 5
9 Test methods . 5
9.1 Determination of adhesion of the foil after hydrolytic/thermolytic storage . 5
9.1.1 Principle . 5
9.1.2 Apparatus and materials . 5
9.1.3 Storage and reconditioning . 5
9.1.4 Determination of the adhesion of the foil . 5
9.1.5 Test report .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12608-2:2023(Main)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives
SIST EN 12608-2:2023

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles covered with foils designed for external uses bonded with adhesives which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17410:2021(Main)
Plastics - Controlled loop recycling of PVC-U profiles from windows and doors
SIST EN 17410:2021

This document specifies the controlled loop and the definition of those material transformation steps which are relevant for product quality, in particular recycling input and output and profile manufacturing input and output.
Traceability tools are specified to characterize this loop as a controlled loop.
This document references existing quality and test methodologies for recycled PVC to be used in PVC-U profiles for windows and doors.
This document establishes the controlled loop treatment of PVC profiles in line with the general understanding of life cycles as outlined in EN 15804.
NOTE 1   With regard to PVC waste treatment, the present document relates to existing standards EN 15343, EN 15346 and EN 15347.
NOTE 2   With regard to semifinished and/or finished products, it refers to the European Standard PVC-U window profiles (see EN 12608-1) and to the European Standards for windows and doors (see EN 14351-1, EN 14351-2 and EN 16034).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12608-1:2016+A1:2020(Main)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
SIST EN 12608-1:2016+A1:2020

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18066(Main)
Plastics - Design for recycling of PVC based profiles for construction products
oSIST prEN 18066:2024

This document applies to unplasticized poly(vinyl chloride) (PVC-U) profiles that are intended to be used for the fabrication of windows and doors in accordance with the EN 14351 series or EN 16034, shutters according to EN 13659 and other construction profiles in accordance with the EN 13245 series. Furthermore, this document is also applicable for profiles used in other PVC-U products, which can include recyclates. This document gives references and specifies general and product-specific design for recycling principles.
NOTE 1   In this document, the term “PVC-U profiles” is used to refer to construction profiles made from PVC-U, PVC-UE, and PVC-U-based natural fibre composites (NFC).
Criteria for the use of materials, process conditions, and recyclability are defined, which are considered during the design process.
This document defines principles to
- obtain the highest possible share of recyclability of the PVC-U part in the profile, and
- increase the share of PVC-U recyclate in the profile,
while complying with requirements for the final product, where existent and defined elsewhere. This document establishes flowcharts which help to assess, (i) how recyclability is evaluated and (ii) whether inclusion of rPVC-U is possible.
The following components of the final PVC-U construction product are considered in this document:
- profiles;
- reinforcements;
- gaskets;
- insulations;
- coverings.
This document specifies only the technical connection of the profile to other components (such as glazing or hardware) and their impact on the recyclability of the PVC-U profiles. The recyclability of the other components (e.g. glazing, aluminium cover, hardware) is excluded from this document.
NOTE 2   Examples for profiles included in this document and their intended use can be found in Figure 1.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12608-2(Main)
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: Laminated profiles
oSIST prEN 12608-2:2022

This European Standard specifies the classifications, requirements and test methods for laminated unplasticized polyvinylchloride (PVC-U) profiles intended to be used for the fabrication of windows and doors.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12608-1:2016/FprA1(Amendment)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
SIST EN 12608-1:2016/kFprA1:2020

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12608-2:2023(Main)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 2: PVC-U profiles covered with foils bonded with adhesives
SIST EN 12608-2:2023

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles covered with foils designed for external uses bonded with adhesives which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17410:2021(Main)
Plastics - Controlled loop recycling of PVC-U profiles from windows and doors
SIST EN 17410:2021

This document specifies the controlled loop and the definition of those material transformation steps which are relevant for product quality, in particular recycling input and output and profile manufacturing input and output.
Traceability tools are specified to characterize this loop as a controlled loop.
This document references existing quality and test methodologies for recycled PVC to be used in PVC-U profiles for windows and doors.
This document establishes the controlled loop treatment of PVC profiles in line with the general understanding of life cycles as outlined in EN 15804.
NOTE 1   With regard to PVC waste treatment, the present document relates to existing standards EN 15343, EN 15346 and EN 15347.
NOTE 2   With regard to semifinished and/or finished products, it refers to the European Standard PVC-U window profiles (see EN 12608-1) and to the European Standards for windows and doors (see EN 14351-1, EN 14351-2 and EN 16034).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12608-1:2016+A1:2020(Main)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
SIST EN 12608-1:2016+A1:2020

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 18066(Main)
Plastics - Design for recycling of PVC based profiles for construction products
oSIST prEN 18066:2024

This document applies to unplasticized poly(vinyl chloride) (PVC-U) profiles that are intended to be used for the fabrication of windows and doors in accordance with the EN 14351 series or EN 16034, shutters according to EN 13659 and other construction profiles in accordance with the EN 13245 series. Furthermore, this document is also applicable for profiles used in other PVC-U products, which can include recyclates. This document gives references and specifies general and product-specific design for recycling principles.
NOTE 1   In this document, the term “PVC-U profiles” is used to refer to construction profiles made from PVC-U, PVC-UE, and PVC-U-based natural fibre composites (NFC).
Criteria for the use of materials, process conditions, and recyclability are defined, which are considered during the design process.
This document defines principles to
- obtain the highest possible share of recyclability of the PVC-U part in the profile, and
- increase the share of PVC-U recyclate in the profile,
while complying with requirements for the final product, where existent and defined elsewhere. This document establishes flowcharts which help to assess, (i) how recyclability is evaluated and (ii) whether inclusion of rPVC-U is possible.
The following components of the final PVC-U construction product are considered in this document:
- profiles;
- reinforcements;
- gaskets;
- insulations;
- coverings.
This document specifies only the technical connection of the profile to other components (such as glazing or hardware) and their impact on the recyclability of the PVC-U profiles. The recyclability of the other components (e.g. glazing, aluminium cover, hardware) is excluded from this document.
NOTE 2   Examples for profiles included in this document and their intended use can be found in Figure 1.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day