CEN/TC 249/WG 21 - Profiles for windows and doors

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles covered with foils designed for external uses bonded with adhesives which are intended to be used for the fabrication of windows and doors.
NOTE 1   For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2   For the purpose of production control, test methods other than those specified in this document can be used.

This document defines the origin of recyclate made from pre-consumer waste and post-consumer waste as it is used in new products. It distinguishes between different PVC materials used in production for PVC window and door profiles.
It specifies terms and definitions for different PVC based materials used for the production of unplasticized poly(vinyl chloride) (PVC-U) profiles for windows and doors.
This document serves as the reference standard for definitions used in related standards such as all parts of EN 12608, EN 17410 or standards for PVC based profiles for building applications.
NOTE   A visualization of PVC material stream can be found in Annex A of EN 17410:— .

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

This document specifies a test method for determining the peel strength of poly(vinyl chloride) (PVC) based profiles laminated with foils.

This document specifies a method for exposing specimens made from poly(vinyl chloride) (PVC) based profiles to xenon-arc radiation, in order to assess changes in characteristics.
It is applicable to PVC based profiles including those covered with foil, lacquered or coextruded.
NOTE The determination of changes in colour and variations of properties after exposure of PVC based profiles to xenon-arc radiation is described in an informative Annex A.

This European Standard specifies a tensile bending method and a compression bending method for determining the failure stress of welded corners and welded T-joints made from unplasticized poly(vinyl chloride) (PVC-U) profiles.
It is applicable to PVC based profiles used for the fabrication of windows and doors.

This European Standard specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.

This European Standard specifies a method for determining the resistance to impact by a falling mass at −10 °C of unplasticized poly(vinyl chloride) (PVC-U) profiles.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.

This European Standard specifies a method for determining the heat reversion of unplasticized poly(vinyl chloride) (PVC-U) profiles at 100 °C in air.
It is also applicable to PVC-based profiles at specified temperatures/other test conditions.

This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.

This document applies to unplasticized poly(vinyl chloride) (PVC-U) profiles that are intended to be used for the fabrication of windows and doors in accordance with the EN 14351 series or EN 16034, shutters according to EN 13659 and other construction profiles in accordance with the EN 13245 series. Furthermore, this document is also applicable for profiles used in other PVC-U products, which can include recyclates. This document gives references and specifies general and product-specific design for recycling principles.
NOTE 1   In this document, the term “PVC-U profiles” is used to refer to construction profiles made from PVC-U, PVC-UE, and PVC-U-based natural fibre composites (NFC).
NOTE 2   For editorial reasons in this document the term window is used for window/door.
Criteria for the use of materials, process conditions, and recyclability are defined, which are considered during the design process.
This document defines principles to
-   obtain the highest possible share of recyclability of the PVC-U part in the profile, and
-   increase the share of PVC-U recyclate in the profile,
while complying with requirements for the final product, where existent and defined elsewhere. This document establishes flowcharts which help to assess, (i) how recyclability is evaluated and (ii) whether inclusion of rPVC-U is possible.
The following components of the final PVC-U construction product are considered in this document:
-   profiles;
-   reinforcements;
-   gaskets;
-   insulations;
-   coverings.
This document specifies only the technical connection of the profile to other components (such as glazing or hardware) and their impact on the recyclability of the PVC-U profiles. The recyclability of the other components (e.g. glazing, aluminium cover, hardware) is excluded from this document.
NOTE 3   Examples for profiles included in this document and their intended use can be found in Figure 1.
Figure 1 - Examples for profiles included in this document and their intended use (frame and sash profile with reinforcements, window, door, cladding and shutter box with shutter)

This document specifies a tensile bending method and a compression bending method for determining the failure stress of welded corners and welded T-joints made from unplasticized poly(vinyl chloride) (PVC-U) profiles.
It is applicable to PVC based profiles used for the fabrication of windows and doors.

This European Standard specifies the classifications, requirements and test methods for laminated unplasticized polyvinylchloride (PVC-U) profiles intended to be used for the fabrication of windows and doors.

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors.
It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows:
-   L* ≥ 82 (chromaticity co-ordinate Y ≥ 60),
-   -2,5 ≤ a* ≤ 5,
-   -5 ≤ b* ≤ 15.
NOTE 1   For editorial reasons in this document the term "window" is used for window/door.
NOTE 2   Profiles made from PVC-U materials with reinforcements (e.g. glass fibres) are not part of this scope.

This European Standard specifies test methods for the determination of the strength of welded corners and T-joints made from unplasticized polyvinylchloride (PVC-U) profiles for the construction of windows and an Annex for the calculation method to determine the calculated breaking load.

This European Standard specifies a method for the determination of the resistance to impact by a falling mass at -10°C of unplasticized polyvinylchloride (PVC-U) main profiles for the fabrication of windows and doorsfor the assessment of the extrusion.