Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Terminology of PVC based materials

This document defines the origin of recyclate made from pre-consumer waste and post-consumer waste as it is used in new products. It distinguishes between different PVC materials used in production for PVC window and door profiles.
It specifies terms and definitions for different PVC based materials used for the production of unplasticized poly(vinyl chloride) (PVC-U) profiles for windows and doors.
This document serves as the reference standard for definitions used in related standards such as all parts of EN 12608, EN 17410 or standards for PVC based profiles for building applications.
NOTE   A visualization of PVC material stream can be found in Annex A of EN 17410:— .

Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen - Terminologie von Werkstoffen auf Basis von PVC

Dieses Dokument legt den Ursprung des vom Produktionsabfall und Endverbraucherabfall produzierten Rezyklats fest, welches in neuen Produkten verwendet wird. Es unterscheidet zwischen verschiedenen PVC-Werkstoffen, die zur Herstellung von PVC-Fenster- und Türprofilen verwendet werden.
Es legt die Begriffe für verschiedene Werkstoffe auf PVC-Basis fest, die für die Herstellung von Profilen aus weichmacherfreiem Polyvinylchlorid (PVC U) für Fenster und Türen verwendet werden.
Dieses Dokument dient als Bezugsnorm für Definitionen, die in verwandten Normen, wie z. B. allen Teilen von EN 12608, EN 17410 oder Normen für Profile auf PVC-Basis im Bauwesen, verwendet werden.
ANMERKUNG   Eine Veranschaulichung des PVC-Materialstroms ist Anhang A in EN 17410:—  zu entnehmen.

Plastiques - Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Terminologie des matériaux à base de PVC

Le présent document définit l'origine du recyclat fabriqué à partir de déchets pré-consommation et post-consommation tel qu'il est utilisé dans de nouveaux produits. Ce document fait une distinction entre les différents matériaux PVC utilisés dans la fabrication des profilés de fenêtres et portes en PVC.
Il spécifie les termes et définitions des différents matériaux à base de PVC utilisés pour la production de profilés en poly(chlorure de vinyle) non plastifié (PVC U) pour les fenêtres et portes.
Le présent document sert de norme de référence pour les définitions utilisées dans les normes associées, notamment toutes les parties de l’EN 12608, l’EN 17410 ou les normes relatives aux profilés à base de PVC pour les applications dans le bâtiment.
NOTE   Une visualisation du flux de matières PVC se trouve dans l’Annexe A de l’EN 17410:— .

Polimerni materiali - Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Terminologija za materiale na osnovi PVC

General Information

Status
Published
Publication Date
11-May-2021
Withdrawal Date
29-Nov-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-May-2021
Due Date
11-Jan-2022
Completion Date
12-May-2021

Buy Standard

Standard
EN 17508:2021
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Polimerni materiali - Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in
vrat - Terminologija za materiale na osnovi PVC
Plastics - Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows
and doors - Terminology of PVC based materials
Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung
von Fenstern und Türen - Terminologie von Werkstoffen auf Basis von PVC
Plastiques - Profilés de polychlorure de vinyle non plastifié (PVC-U) pour la fabrication
des fenêtres et des portes - Terminologie des matériaux à base de PVC
Ta slovenski standard je istoveten z: EN 17508:2021
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17508
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 83.140.99
English Version
Plastics - Unplasticized poly(vinyl chloride) (PVC-U)
profiles for the fabrication of windows and doors -
Terminology of PVC based materials
Plastiques - Profilés de poly(chlorure de vinyle) non Kunststoffe - Profile aus weichmacherfreiem
plastifié (PVC-U) pour la fabrication des fenêtres et des Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
portes - Terminologie des matériaux à base de PVC und Türen - Terminologie von Werkstoffen auf Basis
von PVC
This European Standard was approved by CEN on 12 April 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17508:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
Bibliography . 7

European foreword
This document (EN 17508:2021) has been prepared by Technical Committee CEN/TC 249 “Plastics”, the
secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2021, and conflicting national standards shall
be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This document defines the origin of recyclate made from pre-consumer waste and post-consumer waste
as it is used in new products. It distinguishes between different PVC materials used in production for PVC
window and door profiles.
It specifies terms and definitions for different PVC based materials used for the production of
unplasticized poly(vinyl chloride) (PVC-U) profiles for windows and doors.
This docu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.