EN 1013-5:2000
(Main)Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
1.1. This part of EN 1013 specifies requirements for materials, methods of testing and performance of light transmitting profiled sheets of polymethylmethacrylate (PMMA) produced to the desired profile by extrusion and/or forming for single skin application. It is applicable in conjunction with the general requirements contained in EN 1013-1:1997. 1.2 Requirements are specified relative to: sheet thickness, width of the sheet, visual characteristics, longitudinal reversion, retention of profile, variation of impact strength after ageing and thermal ageing. Test procedures are indicated as appropriate.
Profilierte lichtdurchlässige Platten aus Kunststoff für einschalige Dacheindeckungen - Teil 5: Besondere Anforderungen, Prüfverfahren und -verhalten für Platten aus Polymethylmethacrylat (PMMA)
1.1. Dieser Teil der EN 1013 beschreibt die speziellen Anforderungen, Prüfmethoden und -verfahren für lichtdurchlässige profilierte Platten für einschalige Dacheindeckungen aus Polymethylmethacrylat (PMMA), welche durch Extrusion und/oder Warmformen hergestellt werden. Er gilt in Verbindung mit den allgemeinen Anforderungen in EN 1013-1:1997. 1.2 Es werden Anforderungen an folgende Eigenschaften beschrieben: Plattendicke, Plattenbreite, Allgemeine Beschaffenheit, Dimensionsstabilität in Fertigungsrichtung, Dimensionsstabilität quer zur Fertigungsrichtung.
Plaques profilées éclairantes en matière plastique pour couverture en simple paroi - Partie 5: Exigences spécifiques, méthodes d'essai et performance pour plaques en polyméthylméthacrylate (PMMA)
1.1. Cette partie de l'EN 1013 défint les exigences sur la matière, les méthodes d'essai et les performances des plaques profilées en polyméthacrylate de méthyle (PMMA) pour l'éclairement et produites soit par extrusion et/ou par thermoformage, utilisées en couverture en simple paroi. Elle est applicable en relation avec les exigences générales contenues dans l'EN 1013-1:1997. 1.2 Les exigences spécifiques portent sur les points suivants: épaisseur de la plaque, largeur des plaques, caractéristiques visuelles, retrait longitudinal, retrait transversal, variation de la résistance au choc après vieillissement,...
Prosojna profilirana polimerna plošča za enoslojno strešno kritino - 5. del: Posebne zahteve, preskusne metode in lastnosti plošč iz polimetilmetakrilata (PMMA)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Jan-2000
- Withdrawal Date
- 11-Dec-2012
- Technical Committee
- CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
- Drafting Committee
- CEN/TC 128/SC 9 - Prefabricated accessories for roofing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Dec-2012
- Completion Date
- 12-Dec-2012
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 21-Dec-2011
- Effective Date
- 19-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 1013-5:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets". This standard covers: 1.1. This part of EN 1013 specifies requirements for materials, methods of testing and performance of light transmitting profiled sheets of polymethylmethacrylate (PMMA) produced to the desired profile by extrusion and/or forming for single skin application. It is applicable in conjunction with the general requirements contained in EN 1013-1:1997. 1.2 Requirements are specified relative to: sheet thickness, width of the sheet, visual characteristics, longitudinal reversion, retention of profile, variation of impact strength after ageing and thermal ageing. Test procedures are indicated as appropriate.
1.1. This part of EN 1013 specifies requirements for materials, methods of testing and performance of light transmitting profiled sheets of polymethylmethacrylate (PMMA) produced to the desired profile by extrusion and/or forming for single skin application. It is applicable in conjunction with the general requirements contained in EN 1013-1:1997. 1.2 Requirements are specified relative to: sheet thickness, width of the sheet, visual characteristics, longitudinal reversion, retention of profile, variation of impact strength after ageing and thermal ageing. Test procedures are indicated as appropriate.
EN 1013-5:2000 is classified under the following ICS (International Classification for Standards) categories: 83.140.10 - Films and sheets. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1013-5:2000 has the following relationships with other standards: It is inter standard links to EN 1013:2012, prEN 1013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1013-5:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/BC/CEN/87/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1013-5:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHWDNULODWD300$Profilierte lichtdurchlässige Platten aus Kunststoff für einschalige Dacheindeckungen - Teil 5: Besondere Anforderungen, Prüfverfahren und -verhalten für Platten aus Polymethylmethacrylat (PMMA)Plaques profilées éclairantes en matiere plastique pour couverture en simple paroi - Partie 5: Exigences spécifiques, méthodes d'essai et performance pour plaques en polyméthylméthacrylate (PMMA)Light transmitti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...