83.140.10 - Films and sheets

This document specifies the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films used for covering permanent or temporary greenhouses and walking tunnels and low tunnels used for forcing and semi-forcing vegetable, fruit and flower crops.Lay-flat perforated cover films are also in the scope of this European Standard.It specifies a classification for the durability of covering films and the test methods referred to in this standard.This Europ...view more

See title

This document specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values. It applies only to sheets of thickness not less than 1,0 mm. It does not cover biaxially stretched PVC-U sheets.

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p'-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. This document applies only to thicknesses equal to or greater than 1,5 mm.

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces.
This document applies only to thicknesses equal to or greater than 1,5 mm.

This document specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values.
It applies only to sheets of thickness not less than 1,0 mm.
It does not cover biaxially stretched PVC-U sheets.

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. This document applies only to thicknesses equal to or greater than 1,5 mm.

This document specifies the requirements for flat extruded sheets and pressed sheets of unplasticized poly(vinyl chloride) (PVC-U) and the test methods to be used to measure the required values. It applies only to sheets of thickness not less than 1,0 mm. It does not cover biaxially stretched PVC-U sheets.

1.1 This document specifies the conditions for determining the tensile properties of plastic films or
sheets less than 1 mm thick, based upon the general principles given in ISO 527-1.
NOTE For sheets greater than 1 mm thick, the user is referred to ISO 527-2.
1.2 See ISO 527-1:2012, 1.2.
1.3 This document is not normally suitable for determining the tensile properties of
a) cellular materials, and
b) plastics reinforced by textile fibres.
1.4 See ISO 527-1:2012, 1.3.

This document specifies the requirements and test methods for solid flat compression-moulded sheets
of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing materials. It
applies only to thicknesses from 10 mm to 200 mm.

This document specifies two methods for assessing the tendency of flexible plastic films and sheets to
adhere to one another when left in contact for some time, at a specified temperature and under light
pressure. One method is qualitative and the other is quantitative.

This document specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing materials. It applies only to thicknesses from 10 mm to 200 mm.

This document specifies two methods for assessing the tendency of flexible plastic films and sheets to adhere to one another when left in contact for some time, at a specified temperature and under light pressure. One method is qualitative and the other is quantitative.

1.1 This document specifies the conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based upon the general principles given in ISO 527-1.
NOTE For sheets greater than 1 mm thick, the user is referred to ISO 527-2.
1.2 See ISO 527-1:2012, 1.2.
1.3 This document is not normally suitable for determining the tensile properties of
a) cellular materials, and
b) plastics reinforced by textile fibres.
1.4 See ISO 527-1:2012, 1.3.

1.1 This document specifies the conditions for determining the tensile properties of plastic films or sheets less than 1 mm thick, based upon the general principles given in ISO 527-1. NOTE For sheets greater than 1 mm thick, the user is referred to ISO 527-2. 1.2 See ISO 527-1:2012, 1.2. 1.3 This document is not normally suitable for determining the tensile properties of a) cellular materials, and b) plastics reinforced by textile fibres. 1.4 See ISO 527-1:2012, 1.3.

This document specifies two methods for assessing the tendency of flexible plastic films and sheets to adhere to one another when left in contact for some time, at a specified temperature and under light pressure. One method is qualitative and the other is quantitative.

This document specifies the requirements and test methods for solid flat compression-moulded sheets of polyethylene (PE-UHMW and PE-HD, see ISO 1043-1) without fillers or reinforcing materials. It applies only to thicknesses from 10 mm to 200 mm.

This Technical Report gives guidance for the quantification of alteration of biodegradable thermoplastic mulch
films for use in agriculture and horticulture.
It may be used for biodegradable thermoplastic mulch films in conformance with prEN 17033.

This document gives guidance for the quantification of alteration of biodegradable thermoplastic mulch films for use in agriculture and horticulture.
It can be used for biodegradable thermoplastic mulch films in conformity with EN 17033.