EN ISO 13919-2:2001/A1:2003
(Amendment)Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2003)
Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2003)
This standard provides guidance on levels of imperfections in electron and laser beam welded joints in aluminium and its alloys. Three levels are given in such a way as to permit application for a wide range of welded fabrica-tions. The levels refer to production quality and not to the fitness-for-purpose of the product manufactur-ed.
This standard applies to electron and laser beam welding of:
- aluminium and its alloys;
- all types of welds welded with or without additional filler wire;
- materials equal to or above 1 mm thickness for electron and laser beam welding.
When significant deviations from the joint geometries and dimensions stated in this standard are present in the welded product, it is necessary to evaluate to what extent the provisions of this standard can apply.
NOTE For circular welds, a lower quality level e.g., may be specified for the fade-out zone.
Metallurgical aspects, e.g. grain size, hardness are not covered by this standard.
Schweißen - Elektronenstrahl- und Laserstrahl-Schweißverbindungen - Richtlinie für Bewertungsgruppen für Unregelmäßigkeiten - Teil 2: Aluminium und seine schweißgeeigneten Legierungen (ISO 13919-2:2003)
Diese Norm ist eine Richtlinie zur Bewertung von Unregelmäßigkeiten bei elektronen- und laserstrahlgeschweißten Verbindungen von Aluminium und seinen Legierungen. Es sind drei Bewertungsgruppen in der Form angegeben, daß sie für den überwiegenden Teil aller Schweißungen anwendbar sind. Die Bewertungsgruppen beziehen sich auf die Fertigungsqualität und nicht auf die Gebrauchstauglichkeit der gefertigten Erzeugnisse. Diese Norm gilt für das Elektronen- und Laserstrahlschweißen von: - Aluminium und seinen Legierungen; - alle Arten von Nähten, geschweißt mit und ohne Zusatz; etc.
Secrétariat: DS Soudage - Assemblages soudés par faisceau d'électrons et par faisceau laser - Guide des niveaux de qualité des défauts - Partie 2 : Aluminium et ses alliages soudables (ISO 13919-2:2003)
La présente norme constitue un guide d'évaluation des niveaux des défauts dans les assemblages en aluminium et ses alliages soudés par faisceau d'électrons et par faisceau laser. Elle prévoit trois niveaux, de façon à être applicable à une large gamme de fabrications soudées. Ces niveaux se rapportent à la qualité en production et non à l'aptitude à l'emploi du produit fabriqué.
La présente norme concerne le soudage par faisceau d'électrons et par faisceau laser dans les applications suivantes :
- aluminium et ses alliages ;
- tous types de soudures réalisées avec ou sans fil d'apport ;
- matériaux d'épaisseur supérieure ou égale à 1 mm en soudage par faisceau d'électrons et par faisceau laser.
Pour tout écart significatif dans la géométrie ou les dimensions de l'assemblage décrites dans la présente norme apparaissant sur le produit soudé, il est nécessaire d'évaluer dans quelle mesure les dispositions de la présente norme restent applicables.
NOTE Pour les soudures circulaires, un niveau de qualité inférieur peut être spécifié, par exemple pour la zone d'évanouissement.
La présente norme ne traite pas des aspects métallurgiques tels que la grosseur de grain ou la dureté.
Varjenje - Spoji, zvarjeni z elektronskim in laserskim žarkom - Smernice za stopnje sprejemljivosti napak - 2. del: Aluminij in njegove varive zlitine (ISO 13919-2:2003)
General Information
- Status
- Withdrawn
- Publication Date
- 09-Dec-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 121 - Welding
- Drafting Committee
- CEN/TC 121/SC 4 - Quality management in the field of welding
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 17-Feb-2021
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 07-Mar-2018
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 13919-2:2001/A1:2003 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2003)". This standard covers: This standard provides guidance on levels of imperfections in electron and laser beam welded joints in aluminium and its alloys. Three levels are given in such a way as to permit application for a wide range of welded fabrica-tions. The levels refer to production quality and not to the fitness-for-purpose of the product manufactur-ed. This standard applies to electron and laser beam welding of: - aluminium and its alloys; - all types of welds welded with or without additional filler wire; - materials equal to or above 1 mm thickness for electron and laser beam welding. When significant deviations from the joint geometries and dimensions stated in this standard are present in the welded product, it is necessary to evaluate to what extent the provisions of this standard can apply. NOTE For circular welds, a lower quality level e.g., may be specified for the fade-out zone. Metallurgical aspects, e.g. grain size, hardness are not covered by this standard.
This standard provides guidance on levels of imperfections in electron and laser beam welded joints in aluminium and its alloys. Three levels are given in such a way as to permit application for a wide range of welded fabrica-tions. The levels refer to production quality and not to the fitness-for-purpose of the product manufactur-ed. This standard applies to electron and laser beam welding of: - aluminium and its alloys; - all types of welds welded with or without additional filler wire; - materials equal to or above 1 mm thickness for electron and laser beam welding. When significant deviations from the joint geometries and dimensions stated in this standard are present in the welded product, it is necessary to evaluate to what extent the provisions of this standard can apply. NOTE For circular welds, a lower quality level e.g., may be specified for the fade-out zone. Metallurgical aspects, e.g. grain size, hardness are not covered by this standard.
EN ISO 13919-2:2001/A1:2003 is classified under the following ICS (International Classification for Standards) categories: 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 13919-2:2001/A1:2003 has the following relationships with other standards: It is inter standard links to EN ISO 13919-2:2021, EN ISO 13919-2:2001. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 13919-2:2001/A1:2003 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 13919-2:2001/A1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2004
Varjenje - Spoji, zvarjeni z elektronskim in laserskim žarkom - Smernice za stopnje
sprejemljivosti napak - 2. del: Aluminij in njegove varive zlitine (ISO 13919-2:2003)
Welding - Electron and laser beam welded joints - Guidance on quality levels for
imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2003)
Schweißen - Elektronenstrahl- und Laserstrahl-Schweißverbindungen - Richtlinie für
Bewertungsgruppen für Unregelmäßigkeiten - Teil 2: Aluminium und seine
schweißgeeigneten Legierungen (ISO 13919-2:2003)
Soudage - Assemblages soudés par faisceau d'électrons et par faisceau laser - Guide
des niveaux de qualité des défauts - Partie 2 : Aluminium et ses alliages soudables (ISO
13919-2:2003)
Ta slovenski standard je istovete
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...