EN ISO 14918:1998
(Main)Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)
Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)
This standard gives procedural instructions for approval testing of thermal sprayers. It defines essential requirements, ranges of approval, test conditions, acceptance requirements and certification for approval testing of thermal spray performance. During the approval test the thermal sprayer shall be required to show adequate practical experience and job knowledge of thermal spraying processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.
Thermisches Spritzen - Prüfung von thermischen Spritzen (ISO 14918:1998)
Diese Norm beinhaltet Durchführungsanweisungen für die Prüfung von thermischen Spritzern. Definiert werden wesentliche Einflußgrößen, Zulassungsbereiche, Prüfbedingungen, Bewertungsbedingungen und die Bescheinigung der Leistung des thermischen Spritzers. Für die Prüfung wird der Nachweis gefordert, daß der thermische Spritzer über eine angemessene praktische Erfahrung und Fachkenntnisse hinsichtlich der Spritzprozesse, Werkstoffe und Sicherheitsanforderungen verfügt, für die er zugelassen werden soll. Hinweise hierzu sind in anhang A enthalten.
Projection thermique - Qualification des agents en projection thermique (ISO 14918:1998)
La présente norme donne les instructions de procédure relatives à la qualification des agents en projection thermique. Elle spécifie les exigences essentielles, les domaines de validité, les conditions de contrôle, les critères d'acceptation et de notification des résultats de l'épreuve de qualification de l'agent en projection thermique. Pendant l'épreuve de qualification, l'agent en projection thermique doit faire preuve de son expérience pratique et de sa compétence technologique portant sur les méthodes de projection thermique, les matériaux et règles de sécurité applicables à la qualification en cours.
Vroče brizganje – Ugotavljanje primernosti opreme (ISO 14918:1998)
General Information
- Status
- Withdrawn
- Publication Date
- 30-Sep-1998
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 240 - Thermal spraying and thermally spraying coatings
- Drafting Committee
- CEN/TC 240 - Thermal spraying and thermally spraying coatings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 06-Jun-2018
- Completion Date
- 21-Jan-2026
Relations
- Replaced By
EN ISO 14918:2018 - Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018) - Effective Date
- 25-Feb-2015
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN ISO 14918:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)". This standard covers: This standard gives procedural instructions for approval testing of thermal sprayers. It defines essential requirements, ranges of approval, test conditions, acceptance requirements and certification for approval testing of thermal spray performance. During the approval test the thermal sprayer shall be required to show adequate practical experience and job knowledge of thermal spraying processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.
This standard gives procedural instructions for approval testing of thermal sprayers. It defines essential requirements, ranges of approval, test conditions, acceptance requirements and certification for approval testing of thermal spray performance. During the approval test the thermal sprayer shall be required to show adequate practical experience and job knowledge of thermal spraying processes, materials and safety requirements for which he is to be approved; information on these aspects is given in Annex A.
EN ISO 14918:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 14918:1998 has the following relationships with other standards: It is inter standard links to EN ISO 14918:2018, EN 1395-3:2007, EN 1395-6:2007, EN 1395-1:2007, EN 1395-2:2007, EN 1395-4:2007, EN 1395-5:2018, EN 1395-7:2007, EN ISO 8041-1:2017, EN 1032:2003+A1:2008, EN 14253:2003+A1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 14918:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-1999
9URþHEUL]JDQMH±8JRWDYOMDQMHSULPHUQRVWLRSUHPH ,62
Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998)
Thermisches Spritzen - Prüfung von thermischen Spritzen (ISO 14918:1998)
Projection thermique - Qualification des agents en projection thermique (ISO
14918:1998)
Ta slovenski standard je istoveten z: EN ISO 14918:1998
ICS:
25.220.20 Površinska obdelava Surface treatment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...