EN 10246-2:2000
(Main)Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness
This Part of EN 10246 specifies requirements for automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes with the exception of submerged arc-welded (SAW) tubes for verification of hydraulic leak-tightness. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 4 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatische Wirbelstromprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter austenitischer und austenitisch-ferritischer Stahlrohre zum Nachweis der Dichtheit
Dieser Teil der EN 10246 legt die Anforderungen an die automatische Wirbelstromprüfung nahtloser und geschweißter Rohre aus austenitischen und austenitisch-ferritischen Stählen - mit Ausnahme unterpulvergeschweißter (SAW-) Rohre - zum Nachweis der Dichtheit fest. Die Norm enthält Festlegungen über Zulässigkeitsklassen und die Einstellung der Prüfanlagen sowie Hinweise zu den Grenzen des Prüfverfahrens. Dieser Teil der EN 10246 ist anwendbar für die Prüfung von Rohren mit einem Außendurchmesser ab 4 mm.
Essais non destructifs sur des tubes en acier - Partie 2: Contrôle automatique par courants de Foucault des tubes en aciers austénitique et austéno-ferritique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour vérification de l'étanchéité hydraulique
La présente partie de l'EN 10246 spécifie les prescriptions relatives au contrôle par courants de Foucault des tubes en aciers austénitique et austéno-ferritique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour vérification de l'étanchéité. La norme spécifie des niveaux de sévérité, des procédures d'étalonnage et donne des informations sur les limitations de cet essai. Elle s'applique au contrôle de tubes dont le diamètre extérieur est égal ou supérieur à 4 mm. Les parties de la norme européenne EN 10246 "Essais non destructifs des tubes en acier" sont données en annexe A.
Neporušitveno preskušanje jeklenih cevi - 2. del: Preverjanje hidravlične tesnosti avstenitnih in avstenitno-feritnih jeklenih cevi, nevarjenih in varjenih (razen obločno varjenih pod praškom), z avtomatsko preiskavo z vrtinčnimi tokovi
General Information
- Status
- Withdrawn
- Publication Date
- 15-Feb-2000
- Withdrawal Date
- 31-Mar-2011
- Technical Committee
- ECISS/TC 110 - Steel tubes, and iron and steel fittings
- Drafting Committee
- ECISS/TC 29/SC 10 - Non-destructive testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Apr-2011
- Completion Date
- 01-Apr-2011
Relations
- Effective Date
- 09-Apr-2011
Frequently Asked Questions
EN 10246-2:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness". This standard covers: This Part of EN 10246 specifies requirements for automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes with the exception of submerged arc-welded (SAW) tubes for verification of hydraulic leak-tightness. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 4 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
This Part of EN 10246 specifies requirements for automatic eddy current testing of seamless and welded austenitic and austenitic-ferritic steel tubes with the exception of submerged arc-welded (SAW) tubes for verification of hydraulic leak-tightness. The standard specifies acceptance levels, calibration procedures and gives guidance on the limitations of the tests. This Part of EN 10246 is applicable to the inspection of tubes with an outside diameter equal to or greater than 4 mm. European Standard EN 10246 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.
EN 10246-2:2000 is classified under the following ICS (International Classification for Standards) categories: 23.040.10 - Iron and steel pipes; 77.040.20 - Non-destructive testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10246-2:2000 has the following relationships with other standards: It is inter standard links to EN ISO 10893-1:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10246-2:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10246-2:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zerstörungsfreie Prüfung von Stahlrohren - Teil 2: Automatische Wirbelstromprüfung nahtloser und geschweißter (ausgenommen unterpulvergeschweißter austenitischer und austenitisch-ferritischer Stahlrohre zum Nachweis der DichtheitEssais non destructifs sur des tubes en acier - Partie 2: Contrôle automatique par courants de Foucault des tubes en aciers austénitique et austéno-ferritique sans soudure et soudés (sauf a l'arc immergé sous flux en poudre) pour vérification de l'étanchéité hydrauliqueNon-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (e
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...