EN 1948-3:1996
(Main)Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification
Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification
The present Part of the Standard specifies the identification and quantificationprocedures of the sampled PCDDs/PCDFs. It is an integral part of the complete measurement procedure. The use of the other two parts of this Standard, EN 1948-1:1996 and EN 1948-2:1996, describing sampling and extraction and clean-up, respectively, is necessary for the determination of the PCDDs/PCDFs. This Stan- dard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
Emissionen aus stationären Quellen - Bestimmung der Massenkonzentration von PCDDs/PCDFs - Teil 3: Identifizierung und Quantifizierung
Der vorliegende Teil der Norm das Identifizierungs- und Quantifizierungs- verfahren für die gesammelten PCDD/PCDF fest. Er ist integraler Bestandteil des vollständigen Messverfahrens. Die Anwendung der anderen beiden Teile dieserNorm EN 1948-1:1996 und EN 1948-2:1996, die die Probenahme bzw. die Extraktion und Reinigung beschreiben, ist notwendig für die Bestimmung der PCDD und PCDF. Diese Norm ist für die Messung von PCDD/PCDF-Emissionskonzentrationen von stationären Quellen im Bereich von 0,1 ng I-TEQ/m3 konzipiert.
Emissions de sources fixes - Détermination de la concentration massique en PCDDs/PCDFs - Partie 3: Identification et quantification
La présente partie de la N.E. spécifie des procédures d'identification et quan- tification pour les échantillons de PCDD/PCDF prélevés. Elle est partie intég- rante de la procédure complète de mesure. L'utilisation des deux autres parties de l'EN 1948-1:1996 et EN 1948-2:1996 décrivant d'une part le prélèvement, d'autre part l'extraction et la purification est nécessaure pour la détermi- nation des PCDD et PCDF. Cette norme a été préparée pour mesurer des concentra- tions au niveau 0,1 ng I-TEQ/m cube dans les émissions de sources fixes
Emisije nepremičnih virov – Določevanje masne koncentracije PCDD/PCDF – 3. del: Identifikacija in kvantifikacija
General Information
- Status
- Withdrawn
- Publication Date
- 27-Dec-1996
- Withdrawal Date
- 14-Mar-2006
- Technical Committee
- CEN/TC 264 - Air quality
- Drafting Committee
- CEN/TC 264/WG 1 - Dioxins - emissions
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Mar-2006
- Completion Date
- 15-Mar-2006
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1948-3:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs - Part 3: Identification and quantification". This standard covers: The present Part of the Standard specifies the identification and quantificationprocedures of the sampled PCDDs/PCDFs. It is an integral part of the complete measurement procedure. The use of the other two parts of this Standard, EN 1948-1:1996 and EN 1948-2:1996, describing sampling and extraction and clean-up, respectively, is necessary for the determination of the PCDDs/PCDFs. This Stan- dard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
The present Part of the Standard specifies the identification and quantificationprocedures of the sampled PCDDs/PCDFs. It is an integral part of the complete measurement procedure. The use of the other two parts of this Standard, EN 1948-1:1996 and EN 1948-2:1996, describing sampling and extraction and clean-up, respectively, is necessary for the determination of the PCDDs/PCDFs. This Stan- dard has been designed to measure PCDD/PCDF concentrations at about 0,1 ng I-TEQ/m cube in stationary source emissions.
EN 1948-3:1996 is classified under the following ICS (International Classification for Standards) categories: 13.040.40 - Stationary source emissions. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1948-3:1996 has the following relationships with other standards: It is inter standard links to EN 1948-3:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1948-3:1996 is associated with the following European legislation: EU Directives/Regulations: 89/369/EEC, 89/429/EEC, 94/67/EC; Standardization Mandates: M/BC/CEN/91/12. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1948-3:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-1999
(PLVLMHQHSUHPLþQLKYLURY±'RORþHYDQMHPDVQHNRQFHQWUDFLMH3&''3&')±
GHO ,GHQWLILNDFLMDLQNYDQWLILNDFLMD
Stationary source emissions - Determination of the mass concentration of
PCDDs/PCDFs - Part 3: Identification and quantification
Emissionen aus stationären Quellen - Bestimmung der Massenkonzentration von
PCDDs/PCDFs - Teil 3: Identifizierung und Quantifizierung
Emissions de sources fixes - Détermination de la concentration massique en
PCDDs/PCDFs - Partie 3: Identification et quantification
Ta slovenski standard je istoveten z: EN 1948-3:1996
ICS:
13.040.40 (PLVLMHQHSUHPLþQLKYLURY Stationary source emissions
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...